Return-path: Received: from alexa-out.qualcomm.com ([129.46.98.28]:22381 "EHLO alexa-out.qualcomm.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1751228AbdKUH6K (ORCPT ); Tue, 21 Nov 2017 02:58:10 -0500 From: Kalle Valo To: Sven Eckelmann CC: "ath10k@lists.infradead.org" , Anilkumar Kolli , "akolli@codeaurora.org" , "linux-wireless@vger.kernel.org" , "Daniel Jeang" , Yifeng Tu Subject: Re: [PATCHv3 1/2] ath10k: add per peer htt tx stats support for 10.4 Date: Tue, 21 Nov 2017 07:58:01 +0000 Message-ID: <87tvxocbcn.fsf@kamboji.qca.qualcomm.com> (sfid-20171121_085814_278149_D73B22C9) References: <1479227849-10042-1-git-send-email-akolli@qti.qualcomm.com> <2831996.nqnu04nqHR@bentobox> In-Reply-To: <2831996.nqnu04nqHR@bentobox> (Sven Eckelmann's message of "Fri, 17 Nov 2017 12:06:06 +0100") Content-Type: text/plain; charset="iso-8859-1" MIME-Version: 1.0 Sender: linux-wireless-owner@vger.kernel.org List-ID: Sven Eckelmann writes: > On Dienstag, 15. November 2016 22:07:29 CET akolli@qti.qualcomm.com wrote= : >> From: Anilkumar Kolli >>=20 >> Per peer tx stats are part of 'HTT_10_4_T2H_MSG_TYPE_PEER_STATS' >> event, Firmware sends one HTT event for every four PPDUs. >> HTT payload has success pkts/bytes, failed pkts/bytes, retry >> pkts/bytes and rate info per ppdu. >> Peer stats are enabled through 'WMI_SERVICE_PEER_STATS', >> which are nowadays enabled by default. >>=20 >> Parse peer stats and update the tx rate information per STA. >>=20 >> tx rate, Peer stats are tested on QCA4019 with Firmware version >> 10.4-3.2.1-00028. >>=20 >> Signed-off-by: Anilkumar Kolli > > Why is the support for 10.2.4 firmware not upstreamed? I mean the one whi= ch is=20 > using pktlog to transfer the PEER_STATS information. I'm not sure what you are asking. If you are asking the firmware release mentioned in the commit log that's in ath10k-firmware: https://github.com/kvalo/ath10k-firmware/tree/master/QCA4019/hw1.0/3.2.1 But I'm sure you know that already. --=20 Kalle Valo=