Return-path: Received: from mail-qt0-f196.google.com ([209.85.216.196]:44402 "EHLO mail-qt0-f196.google.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1753341AbdLHKiG (ORCPT ); Fri, 8 Dec 2017 05:38:06 -0500 Received: by mail-qt0-f196.google.com with SMTP id m59so24843618qte.11 for ; Fri, 08 Dec 2017 02:38:06 -0800 (PST) From: Sven Eckelmann To: ath10k@lists.infradead.org Cc: linux-wireless@vger.kernel.org, devicetree@vger.kernel.org, robh+dt@kernel.org, mark.rutland@arm.com, ext.waldemar.rymarkiewicz@tieto.com, kvalo@codeaurora.org, Sven Eckelmann Subject: [PATCH v2 2/2] ath10k: search DT for qcom,ath10k-calibration-variant Date: Fri, 8 Dec 2017 11:37:42 +0100 Message-Id: <20171208103742.3181-3-sven.eckelmann@openmesh.com> (sfid-20171208_113815_550628_81A02F8F) In-Reply-To: <20171208103742.3181-1-sven.eckelmann@openmesh.com> References: <20171208103742.3181-1-sven.eckelmann@openmesh.com> Sender: linux-wireless-owner@vger.kernel.org List-ID: Board Data File (BDF) is loaded upon driver boot-up procedure. The right board data file is identified on QCA4019 using bus, bmi-chip-id and bmi-board-id. The problem, however, can occur when the (default) board data file cannot fulfill with the vendor requirements and it is necessary to use a different board data file. This problem was solved for SMBIOS by adding a special SMBIOS type 0xF8. Something similar has to be provided for systems without SMBIOS but with device trees. No solution was specified by QCA and therefore a new one has to be found for ath10k. The device tree requires addition strings to define the variant name wifi@a000000 { status = "okay"; qcom,ath10k-calibration-variant = "RT-AC58U"; }; wifi@a800000 { status = "okay"; qcom,ath10k-calibration-variant = "RT-AC58U"; }; This would create the boarddata identifiers for the board-2.bin search * bus=ahb,bmi-chip-id=0,bmi-board-id=16,variant=RT-AC58U * bus=ahb,bmi-chip-id=0,bmi-board-id=17,variant=RT-AC58U Signed-off-by: Sven Eckelmann --- drivers/net/wireless/ath/ath10k/core.c | 40 ++++++++++++++++++++++++++++------ 1 file changed, 33 insertions(+), 7 deletions(-) diff --git a/drivers/net/wireless/ath/ath10k/core.c b/drivers/net/wireless/ath/ath10k/core.c index b29fdbd21ead..6264e2cc4c0d 100644 --- a/drivers/net/wireless/ath/ath10k/core.c +++ b/drivers/net/wireless/ath/ath10k/core.c @@ -860,6 +860,28 @@ static int ath10k_core_check_smbios(struct ath10k *ar) return 0; } +static int ath10k_core_check_dt(struct ath10k *ar) +{ + struct device_node *node; + const char *variant = NULL; + + node = ar->dev->of_node; + if (!node) + return -ENOENT; + + of_property_read_string(node, "qcom,ath10k-calibration-variant", + &variant); + if (!variant) + return -ENODATA; + + if (strscpy(ar->id.bdf_ext, variant, sizeof(ar->id.bdf_ext)) < 0) + ath10k_dbg(ar, ATH10K_DBG_BOOT, + "bdf variant string is longer than the buffer can accommodate (variant: %s)\n", + variant); + + return 0; +} + static int ath10k_download_and_run_otp(struct ath10k *ar) { u32 result, address = ar->hw_params.patch_load_addr; @@ -1231,19 +1253,19 @@ static int ath10k_core_create_board_name(struct ath10k *ar, char *name, /* strlen(',variant=') + strlen(ar->id.bdf_ext) */ char variant[9 + ATH10K_SMBIOS_BDF_EXT_STR_LENGTH] = { 0 }; + if (ar->id.bdf_ext[0] != '\0') + scnprintf(variant, sizeof(variant), ",variant=%s", + ar->id.bdf_ext); + if (ar->id.bmi_ids_valid) { scnprintf(name, name_len, - "bus=%s,bmi-chip-id=%d,bmi-board-id=%d", + "bus=%s,bmi-chip-id=%d,bmi-board-id=%d%s", ath10k_bus_str(ar->hif.bus), ar->id.bmi_chip_id, - ar->id.bmi_board_id); + ar->id.bmi_board_id, variant); goto out; } - if (ar->id.bdf_ext[0] != '\0') - scnprintf(variant, sizeof(variant), ",variant=%s", - ar->id.bdf_ext); - scnprintf(name, name_len, "bus=%s,vendor=%04x,device=%04x,subsystem-vendor=%04x,subsystem-device=%04x%s", ath10k_bus_str(ar->hif.bus), @@ -2343,7 +2365,11 @@ static int ath10k_core_probe_fw(struct ath10k *ar) ret = ath10k_core_check_smbios(ar); if (ret) - ath10k_dbg(ar, ATH10K_DBG_BOOT, "bdf variant name not set.\n"); + ath10k_dbg(ar, ATH10K_DBG_BOOT, "SMBIOS bdf variant name not set.\n"); + + ret = ath10k_core_check_dt(ar); + if (ret) + ath10k_dbg(ar, ATH10K_DBG_BOOT, "DT bdf variant name not set.\n"); ret = ath10k_core_fetch_board_file(ar); if (ret) { -- 2.11.0