Return-path: Received: from sabertooth01.qualcomm.com ([65.197.215.72]:37991 "EHLO sabertooth01.qualcomm.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1752816AbdLMRwU (ORCPT ); Wed, 13 Dec 2017 12:52:20 -0500 From: Jouni Malinen To: Johannes Berg CC: , Sunil Dutt , Jouni Malinen Subject: [PATCH] nl80211: Introduce scan flags to emphasize requested scan behavior Date: Wed, 13 Dec 2017 19:52:03 +0200 Message-ID: <1513187523-24054-1-git-send-email-jouni@qca.qualcomm.com> (sfid-20171213_185225_278263_0ABE8244) MIME-Version: 1.0 Content-Type: text/plain Sender: linux-wireless-owner@vger.kernel.org List-ID: From: Sunil Dutt This commit defines new scan flags (LOW_SPAN, LOW_POWER, HIGH_LATENCY) to emphasize the requested scan behavior for the driver. These flags are optional and are mutually exclusive. Driver shall resort to default behavior if a respective flag is not supported. The implementation of the respective functionality can be driver/hardware specific. These flags can be used to control the compromise between how long a scan takes, how much power it uses, and high accurate/complete the scan is in finding the BSSs. Signed-off-by: Sunil Dutt Signed-off-by: Jouni Malinen --- include/uapi/linux/nl80211.h | 23 ++++++++++++++++++++++- 1 file changed, 22 insertions(+), 1 deletion(-) diff --git a/include/uapi/linux/nl80211.h b/include/uapi/linux/nl80211.h index 6dd6939..68fdb95 100644 --- a/include/uapi/linux/nl80211.h +++ b/include/uapi/linux/nl80211.h @@ -5059,6 +5059,11 @@ enum nl80211_timeout_reason { * of NL80211_CMD_TRIGGER_SCAN and NL80211_CMD_START_SCHED_SCAN * requests. * + * NL80211_SCAN_FLAG_LOW_SPAN, NL80211_SCAN_FLAG_LOW_POWER, and + * NL80211_SCAN_FLAG_HIGH_ACCURACY flags are exclusive of each other, i.e., only + * one of them can be used in the request. If the driver does not support the + * requested behavior, default scan behavior will be used instead. + * * @NL80211_SCAN_FLAG_LOW_PRIORITY: scan request has low priority * @NL80211_SCAN_FLAG_FLUSH: flush cache before scanning * @NL80211_SCAN_FLAG_AP: force a scan even if the interface is configured @@ -5086,7 +5091,20 @@ enum nl80211_timeout_reason { * and suppression (if it has received a broadcast Probe Response frame, * Beacon frame or FILS Discovery frame from an AP that the STA considers * a suitable candidate for (re-)association - suitable in terms of - * SSID and/or RSSI + * SSID and/or RSSI. + * @NL80211_SCAN_FLAG_LOW_SPAN: Span corresponds to the total time taken to + * accomplish the scan. Thus, this flag intends the driver to perform the + * scan request with lesser span/duration. It is specific to the driver + * implementations on how this is accomplished. Scan accuracy may get + * impacted with this flag. This flag cannot be used with + * @NL80211_SCAN_FLAG_LOW_POWER: This flag intends the scan attempts to consume + * optimal possible power. Drivers can resort to their specific means to + * optimize the power. Scan accuracy may get impacted with this flag. + * @NL80211_SCAN_FLAG_HIGH_ACCURACY: Accuracy here intends to the extent of scan + * results obtained. Thus HIGH_ACCURACY scan flag aims to get maximum + * possible scan results. This flag hints the driver to use the best + * possible scan configuration to improve the accuracy in scanning. + * Latency and power use may get impacted with this flag. */ enum nl80211_scan_flags { NL80211_SCAN_FLAG_LOW_PRIORITY = 1<<0, @@ -5097,6 +5115,9 @@ enum nl80211_scan_flags { NL80211_SCAN_FLAG_ACCEPT_BCAST_PROBE_RESP = 1<<5, NL80211_SCAN_FLAG_OCE_PROBE_REQ_HIGH_TX_RATE = 1<<6, NL80211_SCAN_FLAG_OCE_PROBE_REQ_DEFERRAL_SUPPRESSION = 1<<7, + NL80211_SCAN_FLAG_LOW_SPAN = 1<<8, + NL80211_SCAN_FLAG_LOW_POWER = 1<<9, + NL80211_SCAN_FLAG_HIGH_ACCURACY = 1<<10, }; /** -- 2.7.4