Return-path: Received: from alexa-out.qualcomm.com ([129.46.98.28]:53203 "EHLO alexa-out.qualcomm.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1756350AbdLVPrr (ORCPT ); Fri, 22 Dec 2017 10:47:47 -0500 From: Kalle Valo To: Erik Stromdahl CC: "linux-wireless@vger.kernel.org" , "ath10k@lists.infradead.org" Subject: Re: [RFC v3 09/11] ath10k: add QCA9377 sdio hw_param item Date: Fri, 22 Dec 2017 15:47:01 +0000 Message-ID: <877eteahoq.fsf@kamboji.qca.qualcomm.com> (sfid-20171222_164753_273152_FD59E106) References: <20170917194013.8658-1-erik.stromdahl@gmail.com> <20170917194013.8658-10-erik.stromdahl@gmail.com> In-Reply-To: <20170917194013.8658-10-erik.stromdahl@gmail.com> (Erik Stromdahl's message of "Sun, 17 Sep 2017 21:40:11 +0200") Content-Type: text/plain; charset="iso-8859-1" MIME-Version: 1.0 Sender: linux-wireless-owner@vger.kernel.org List-ID: Erik Stromdahl writes: > Hardware parameters for QCA9377 sdio devices. > > Signed-off-by: Erik Stromdahl > --- > drivers/net/wireless/ath/ath10k/core.c | 25 +++++++++++++++++++++++++ > drivers/net/wireless/ath/ath10k/hw.h | 1 + > 2 files changed, 26 insertions(+) > > diff --git a/drivers/net/wireless/ath/ath10k/core.c b/drivers/net/wireles= s/ath/ath10k/core.c > index b6893254ef53..146a9f61b5f0 100644 > --- a/drivers/net/wireless/ath/ath10k/core.c > +++ b/drivers/net/wireless/ath/ath10k/core.c > @@ -351,6 +351,31 @@ static const struct ath10k_hw_params ath10k_hw_param= s_list[] =3D { > .bus =3D ATH10K_BUS_USB, > .start_once =3D true, > }, > + { > + .id =3D QCA9377_HW_1_1_DEV_VERSION, > + .dev_id =3D QCA9377_1_0_DEVICE_ID, > + .name =3D "qca9377 hw1.1 sdio", > + .patch_load_addr =3D QCA9377_HW_1_0_PATCH_LOAD_ADDR, > + .uart_pin =3D 19, > + .otp_exe_param =3D 0, > + .channel_counters_freq_hz =3D 88000, > + .max_probe_resp_desc_thres =3D 0, > + .cal_data_len =3D 8124, > + .fw =3D { > + .dir =3D QCA9377_HW_1_0_FW_DIR, > + .board =3D QCA9377_HW_1_0_BOARD_DATA_FILE_SDIO, > + .board_size =3D QCA9377_BOARD_DATA_SZ, > + .board_ext_size =3D QCA9377_BOARD_EXT_DATA_SZ, > + }, > + .hw_ops =3D &qca6174_ops, > + .hw_clk =3D qca6174_clk, > + .target_cpu_freq =3D 176000000, > + .decap_align_bytes =3D 4, > + .max_num_peers =3D TARGET_QCA9377_HL_NUM_PEERS, > + .is_high_latency =3D true, > + .bus =3D ATH10K_BUS_SDIO, > + .start_once =3D true, > + }, > { > .id =3D QCA4019_HW_1_0_DEV_VERSION, > .dev_id =3D 0, > diff --git a/drivers/net/wireless/ath/ath10k/hw.h b/drivers/net/wireless/= ath/ath10k/hw.h > index 420851e26a09..77011a6cafa1 100644 > --- a/drivers/net/wireless/ath/ath10k/hw.h > +++ b/drivers/net/wireless/ath/ath10k/hw.h > @@ -128,6 +128,7 @@ enum qca9377_chip_id_rev { > #define QCA9377_HW_1_0_FW_DIR ATH10K_FW_DIR "/QCA9377/hw1.0" > #define QCA9377_HW_1_0_BOARD_DATA_FILE "board.bin" > #define QCA9377_HW_1_0_BOARD_DATA_FILE_USB "board-usb.bin" > +#define QCA9377_HW_1_0_BOARD_DATA_FILE_SDIO "board-sdio.bin" Similar comment about not sure about having separate board.bin for sdio. --=20 Kalle Valo=