Return-path: Received: from wolverine01.qualcomm.com ([199.106.114.254]:25940 "EHLO wolverine01.qualcomm.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1751014AbeAUJUz (ORCPT ); Sun, 21 Jan 2018 04:20:55 -0500 From: Maya Erez To: Kalle Valo Cc: Maya Erez , linux-wireless@vger.kernel.org, wil6210@qti.qualcomm.com Subject: [PATCH v2 0/8] wil6210 patches Date: Sun, 21 Jan 2018 11:14:35 +0200 Message-Id: <1516526083-31389-1-git-send-email-merez@codeaurora.org> (sfid-20180121_102103_042429_C4890C28) Sender: linux-wireless-owner@vger.kernel.org List-ID: Changes from v1: - Adding missing line in "wil6210: fix random failure to bring network interface up" The following patches add support for new wil6210 device and general fixes. Dedy Lansky (1): wil6210: support flashless device Lior David (2): wil6210: fix random failure to bring network interface up wil6210: enlarge FW mac_rgf_ext section for Sparrow D0 Maya Erez (5): wil6210: add Talyn PCIe device ID wil6210: recognize Talyn JTAG ID wil6210: add support for Talyn AHB address map wil6210: configure OTP HW vectors in SW reset flow wil6210: support parsing brd file address from fw file drivers/net/wireless/ath/wil6210/boot_loader.h | 9 +- drivers/net/wireless/ath/wil6210/fw.h | 18 +- drivers/net/wireless/ath/wil6210/fw_inc.c | 167 ++++++++++++++++++- drivers/net/wireless/ath/wil6210/interrupt.c | 6 +- drivers/net/wireless/ath/wil6210/main.c | 217 ++++++++++++++++++++++--- drivers/net/wireless/ath/wil6210/pcie_bus.c | 46 +++++- drivers/net/wireless/ath/wil6210/wil6210.h | 55 ++++++- drivers/net/wireless/ath/wil6210/wmi.c | 90 +++++++++- 8 files changed, 550 insertions(+), 58 deletions(-) -- 1.9.1