Return-path: Received: from mx1.uni-rostock.de ([139.30.22.71]:51907 "EHLO mx1.uni-rostock.de" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1751112AbeAVRE4 (ORCPT ); Mon, 22 Jan 2018 12:04:56 -0500 From: Benjamin Beichler To: CC: , Benjamin Beichler Subject: [PATCH v4 1/3] mac80211_hwsim: add permanent mac address option for new radios Date: Mon, 22 Jan 2018 18:04:35 +0100 Message-ID: <20180122170437.14213-2-benjamin.beichler@uni-rostock.de> (sfid-20180122_180501_233787_631FB5F0) In-Reply-To: <20180122170437.14213-1-benjamin.beichler@uni-rostock.de> References: <20180122170437.14213-1-benjamin.beichler@uni-rostock.de> MIME-Version: 1.0 Content-Type: text/plain Sender: linux-wireless-owner@vger.kernel.org List-ID: If simulation needs predictable permanent mac addresses of hwsim wireless phy, this patch add the ability to create a new radio with a user defined permanent mac address. Allowed mac addresses needs to be locally administrated mac addresses (as also the former fixed 42:* and 02:* were). To do not break the operation with legacy software using hwsim, the new address is set twice. The problem here is, the netlink call backs use wiphy->addresses[1] as identification of a radio and not the proposed permanent address (wiphy->addresses[0]). This design decision is not documented in the kernel repo, therefore this patch simply reproduces this, but with the same address. Signed-off-by: Benjamin Beichler --- drivers/net/wireless/mac80211_hwsim.c | 43 +++++++++++++++++++++++++++-------- drivers/net/wireless/mac80211_hwsim.h | 9 +++++++- 2 files changed, 42 insertions(+), 10 deletions(-) diff --git a/drivers/net/wireless/mac80211_hwsim.c b/drivers/net/wireless/mac80211_hwsim.c index 66c2ac0397da..e9c92f70b97d 100644 --- a/drivers/net/wireless/mac80211_hwsim.c +++ b/drivers/net/wireless/mac80211_hwsim.c @@ -636,6 +636,7 @@ static const struct nla_policy hwsim_genl_policy[HWSIM_ATTR_MAX + 1] = { [HWSIM_ATTR_RADIO_NAME] = { .type = NLA_STRING }, [HWSIM_ATTR_NO_VIF] = { .type = NLA_FLAG }, [HWSIM_ATTR_FREQ] = { .type = NLA_U32 }, + [HWSIM_ATTR_PERM_ADDR] = { .type = NLA_UNSPEC, .len = ETH_ALEN }, }; static void mac80211_hwsim_tx_frame(struct ieee80211_hw *hw, @@ -2407,6 +2408,7 @@ struct hwsim_new_radio_params { bool destroy_on_close; const char *hwname; bool no_vif; + u8 *perm_addr; }; static void hwsim_mcast_config_msg(struct sk_buff *mcast_skb, @@ -2571,15 +2573,25 @@ static int mac80211_hwsim_new_radio(struct genl_info *info, skb_queue_head_init(&data->pending); SET_IEEE80211_DEV(hw, data->dev); - eth_zero_addr(addr); - addr[0] = 0x02; - addr[3] = idx >> 8; - addr[4] = idx; - memcpy(data->addresses[0].addr, addr, ETH_ALEN); - memcpy(data->addresses[1].addr, addr, ETH_ALEN); - data->addresses[1].addr[0] |= 0x40; - hw->wiphy->n_addresses = 2; - hw->wiphy->addresses = data->addresses; + if (!param->perm_addr) { + eth_zero_addr(addr); + addr[0] = 0x02; + addr[3] = idx >> 8; + addr[4] = idx; + memcpy(data->addresses[0].addr, addr, ETH_ALEN); + /* Why need here second address ? */ + data->addresses[1].addr[0] |= 0x40; + memcpy(data->addresses[1].addr, addr, ETH_ALEN); + hw->wiphy->n_addresses = 2; + hw->wiphy->addresses = data->addresses; + /* possible address clash is checked at hash table insertion */ + } else { + memcpy(data->addresses[0].addr, param->perm_addr, ETH_ALEN); + /* compatibility with automatically generated mac addr */ + memcpy(data->addresses[1].addr, param->perm_addr, ETH_ALEN); + hw->wiphy->n_addresses = 2; + hw->wiphy->addresses = data->addresses; + } data->channels = param->channels; data->use_chanctx = param->use_chanctx; @@ -3204,6 +3216,19 @@ static int hwsim_new_radio_nl(struct sk_buff *msg, struct genl_info *info) param.regd = hwsim_world_regdom_custom[idx]; } + if (info->attrs[HWSIM_ATTR_PERM_ADDR]) { + if (!is_valid_ether_addr( + nla_data(info->attrs[HWSIM_ATTR_PERM_ADDR]))) { + GENL_SET_ERR_MSG(info,"MAC is no valid source addr"); + NL_SET_BAD_ATTR(info->extack, + info->attrs[HWSIM_ATTR_PERM_ADDR]); + return -EINVAL; + } + + + param.perm_addr = nla_data(info->attrs[HWSIM_ATTR_PERM_ADDR]); + } + ret = mac80211_hwsim_new_radio(info, ¶m); kfree(hwname); return ret; diff --git a/drivers/net/wireless/mac80211_hwsim.h b/drivers/net/wireless/mac80211_hwsim.h index a96a79c1eff5..0fe3199f8c72 100644 --- a/drivers/net/wireless/mac80211_hwsim.h +++ b/drivers/net/wireless/mac80211_hwsim.h @@ -68,7 +68,12 @@ enum hwsim_tx_control_flags { * %HWSIM_ATTR_SIGNAL, %HWSIM_ATTR_COOKIE * @HWSIM_CMD_NEW_RADIO: create a new radio with the given parameters, * returns the radio ID (>= 0) or negative on errors, if successful - * then multicast the result + * then multicast the result, uses optional parameter: + * %HWSIM_ATTR_REG_STRICT_REG, %HWSIM_ATTR_SUPPORT_P2P_DEVICE, + * %HWSIM_ATTR_DESTROY_RADIO_ON_CLOSE, %HWSIM_ATTR_CHANNELS, + * %HWSIM_ATTR_NO_VIF, %HWSIM_ATTR_RADIO_NAME, %HWSIM_ATTR_USE_CHANCTX, + * %HWSIM_ATTR_REG_HINT_ALPHA2, %HWSIM_ATTR_REG_CUSTOM_REG, + * %HWSIM_ATTR_PERM_ADDR * @HWSIM_CMD_DEL_RADIO: destroy a radio, reply is multicasted * @HWSIM_CMD_GET_RADIO: fetch information about existing radios, uses: * %HWSIM_ATTR_RADIO_ID @@ -126,6 +131,7 @@ enum { * @HWSIM_ATTR_FREQ: Frequency at which packet is transmitted or received. * @HWSIM_ATTR_TX_INFO_FLAGS: additional flags for corresponding * rates of %HWSIM_ATTR_TX_INFO + * @HWSIM_ATTR_PERM_ADDR: permanent mac address of new radio * @__HWSIM_ATTR_MAX: enum limit */ @@ -153,6 +159,7 @@ enum { HWSIM_ATTR_FREQ, HWSIM_ATTR_PAD, HWSIM_ATTR_TX_INFO_FLAGS, + HWSIM_ATTR_PERM_ADDR, __HWSIM_ATTR_MAX, }; #define HWSIM_ATTR_MAX (__HWSIM_ATTR_MAX - 1) -- 2.15.1