Return-path: Received: from mail-qk0-f196.google.com ([209.85.220.196]:39848 "EHLO mail-qk0-f196.google.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1031343AbeCAOVQ (ORCPT ); Thu, 1 Mar 2018 09:21:16 -0500 Received: by mail-qk0-f196.google.com with SMTP id z197so7701242qkb.6 for ; Thu, 01 Mar 2018 06:21:15 -0800 (PST) From: Sven Eckelmann To: linux-wireless@vger.kernel.org Cc: Kalle Valo , "Luis R. Rodriguez" , Sven Eckelmann Subject: [PATCH 19/52] ath: Add regulatory mapping for ETSI9_WORLD Date: Thu, 1 Mar 2018 15:18:29 +0100 Message-Id: <20180301141902.24824-20-sven.eckelmann@openmesh.com> (sfid-20180301_152121_002926_52B29696) In-Reply-To: <20180301141902.24824-1-sven.eckelmann@openmesh.com> References: <20180301141902.24824-1-sven.eckelmann@openmesh.com> Sender: linux-wireless-owner@vger.kernel.org List-ID: The regdomain code is used to select the correct the correct conformance test limits (CTL) for a country. If the regdomain code isn't available and it is still programmed in the EEPROM then it will cause an error and stop the initialization with: Invalid EEPROM contents The current CTL mappings for this regdomain code are: * 2.4GHz: ETSI * 5GHz: ETSI Signed-off-by: Sven Eckelmann --- drivers/net/wireless/ath/regd_common.h | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/net/wireless/ath/regd_common.h b/drivers/net/wireless/ath/regd_common.h index 88913c67fed2..f1735ac67c52 100644 --- a/drivers/net/wireless/ath/regd_common.h +++ b/drivers/net/wireless/ath/regd_common.h @@ -45,6 +45,7 @@ enum EnumRd { ETSI5_WORLD = 0x39, ETSI6_WORLD = 0x34, ETSI8_WORLD = 0x3D, + ETSI9_WORLD = 0x3E, ETSI_RESERVED = 0x33, MKK1_MKKA = 0x40, @@ -185,6 +186,7 @@ static struct reg_dmn_pair_mapping regDomainPairs[] = { {ETSI5_WORLD, CTL_ETSI, CTL_ETSI}, {ETSI6_WORLD, CTL_ETSI, CTL_ETSI}, {ETSI8_WORLD, CTL_ETSI, CTL_ETSI}, + {ETSI9_WORLD, CTL_ETSI, CTL_ETSI}, /* XXX: For ETSI3_ETSIA, Was NO_CTL meant for the 2 GHz band ? */ {ETSI3_ETSIA, CTL_ETSI, CTL_ETSI}, -- 2.11.0