Return-path: Received: from mail-qt0-f196.google.com ([209.85.216.196]:41440 "EHLO mail-qt0-f196.google.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1031339AbeCAOVN (ORCPT ); Thu, 1 Mar 2018 09:21:13 -0500 Received: by mail-qt0-f196.google.com with SMTP id j4so7673956qth.8 for ; Thu, 01 Mar 2018 06:21:13 -0800 (PST) From: Sven Eckelmann To: linux-wireless@vger.kernel.org Cc: Kalle Valo , "Luis R. Rodriguez" , Sven Eckelmann Subject: [PATCH 18/52] ath: Add regulatory mapping for ETSI8_WORLD Date: Thu, 1 Mar 2018 15:18:28 +0100 Message-Id: <20180301141902.24824-19-sven.eckelmann@openmesh.com> (sfid-20180301_152118_982355_DBF03B23) In-Reply-To: <20180301141902.24824-1-sven.eckelmann@openmesh.com> References: <20180301141902.24824-1-sven.eckelmann@openmesh.com> Sender: linux-wireless-owner@vger.kernel.org List-ID: The regdomain code is used to select the correct the correct conformance test limits (CTL) for a country. If the regdomain code isn't available and it is still programmed in the EEPROM then it will cause an error and stop the initialization with: Invalid EEPROM contents The current CTL mappings for this regdomain code are: * 2.4GHz: ETSI * 5GHz: ETSI Signed-off-by: Sven Eckelmann --- drivers/net/wireless/ath/regd_common.h | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/net/wireless/ath/regd_common.h b/drivers/net/wireless/ath/regd_common.h index 14332b84443b..88913c67fed2 100644 --- a/drivers/net/wireless/ath/regd_common.h +++ b/drivers/net/wireless/ath/regd_common.h @@ -44,6 +44,7 @@ enum EnumRd { ETSI4_ETSIC = 0x38, ETSI5_WORLD = 0x39, ETSI6_WORLD = 0x34, + ETSI8_WORLD = 0x3D, ETSI_RESERVED = 0x33, MKK1_MKKA = 0x40, @@ -183,6 +184,7 @@ static struct reg_dmn_pair_mapping regDomainPairs[] = { {ETSI4_WORLD, CTL_ETSI, CTL_ETSI}, {ETSI5_WORLD, CTL_ETSI, CTL_ETSI}, {ETSI6_WORLD, CTL_ETSI, CTL_ETSI}, + {ETSI8_WORLD, CTL_ETSI, CTL_ETSI}, /* XXX: For ETSI3_ETSIA, Was NO_CTL meant for the 2 GHz band ? */ {ETSI3_ETSIA, CTL_ETSI, CTL_ETSI}, -- 2.11.0