Return-path: Received: from alexa-out-ams-01.qualcomm.com ([185.23.61.162]:6873 "EHLO alexa-out-ams-01.qualcomm.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1754834AbeDPNy0 (ORCPT ); Mon, 16 Apr 2018 09:54:26 -0400 From: Kalle Valo To: Josh Boyer CC: ojab // , Linux Wireless , Linux Firmware Subject: Re: Compex WLE1216V2-20 (QCA9984) firmware is missing Date: Mon, 16 Apr 2018 13:54:15 +0000 Message-ID: <87po2zp88o.fsf@kamboji.qca.qualcomm.com> (sfid-20180416_155429_766703_BA69177C) References: In-Reply-To: (Josh Boyer's message of "Mon, 16 Apr 2018 09:48:42 -0400") Content-Type: text/plain; charset="iso-8859-1" MIME-Version: 1.0 Sender: linux-wireless-owner@vger.kernel.org List-ID: Josh Boyer writes: > On Tue, Mar 27, 2018 at 12:41 PM, ojab // wrote: >> [please CC me since I'm not subscribed to the lists and terribly sorry >> for HTML mails] >> >> Oh hai! >> >> I have Compex WLE1216V2-20 (based on QCA9984 chip) that isn't >> supported by linux-firmware (git master), card init fails with >> >>>[Mon Mar 26 17:18:47 2018] ath10k_pci 0000:05:00.0: failed to fetch >> board data for bus=3Dpci,bmi-chip-id=3D0,bmi-board-id=3D30 from >> ath10k/QCA9984/hw1.0/board-2.bin >> >> It works fine with board-2.bin from the compex website [1] (can be >> downloaded directly from >> https://bugzilla.kernel.org/attachment.cgi?id=3D274959). >> What should be done to have it upstreamed? > > This is likely a question for Kalle. I would expect an update to the > existing board-2.bin file submitted through Qualcomm with support for > that device. Yes, this should have been sent to the ath10k list, not to linux-firmware. https://wireless.wiki.kernel.org/en/users/drivers/ath10k/support --=20 Kalle Valo=