Return-path: Received: from smtp.codeaurora.org ([198.145.29.96]:36214 "EHLO smtp.codeaurora.org" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1750740AbeELBWp (ORCPT ); Fri, 11 May 2018 21:22:45 -0400 From: Pradeep Kumar Chitrapu To: ath10k@lists.infradead.org Cc: linux-wireless@vger.kernel.org, Pradeep Kumar Chitrapu Subject: [PATCH] ath10k: Add support to configure channel dwell time Date: Fri, 11 May 2018 18:22:39 -0700 Message-Id: <1526088159-29912-1-git-send-email-pradeepc@codeaurora.org> (sfid-20180512_032249_615870_2BE644E5) Sender: linux-wireless-owner@vger.kernel.org List-ID: Configure channel dwell time from duration of the scan request received from mac80211 when the duration is non-zero. When the scan request does not have duration value, use the default ones, the current implementation. Corresponding flag NL80211_EXT_FEATURE_SET_SCAN_DWELL is advertized. Supported Chipsets: -QCA988X/QCA9887 PCI -QCA99X0/QCA9984/QCA9888/QCA4019 PCI -QCA6174/QCA9377 PCI/USB/SDIO -WCN3990 SNOC Tested on QCA9984 with firmware ver 10.4-3.6-0010 Signed-off-by: Pradeep Kumar Chitrapu --- drivers/net/wireless/ath/ath10k/core.h | 1 + drivers/net/wireless/ath/ath10k/mac.c | 23 ++++++++++++++++++++--- 2 files changed, 21 insertions(+), 3 deletions(-) diff --git a/drivers/net/wireless/ath/ath10k/core.h b/drivers/net/wireless/ath/ath10k/core.h index c17d805..39d4d7d 100644 --- a/drivers/net/wireless/ath/ath10k/core.h +++ b/drivers/net/wireless/ath/ath10k/core.h @@ -44,6 +44,7 @@ #define WO(_f) ((_f##_OFFSET) >> 2) #define ATH10K_SCAN_ID 0 +#define ATH10K_SCAN_CHANNEL_SWITCH_WMI_EVT_OVERHEAD 10 /* msec */ #define WMI_READY_TIMEOUT (5 * HZ) #define ATH10K_FLUSH_TIMEOUT_HZ (5 * HZ) #define ATH10K_CONNECTION_LOSS_HZ (3 * HZ) diff --git a/drivers/net/wireless/ath/ath10k/mac.c b/drivers/net/wireless/ath/ath10k/mac.c index bf05a36..c6828c7 100644 --- a/drivers/net/wireless/ath/ath10k/mac.c +++ b/drivers/net/wireless/ath/ath10k/mac.c @@ -5668,6 +5668,7 @@ static int ath10k_hw_scan(struct ieee80211_hw *hw, struct wmi_start_scan_arg arg; int ret = 0; int i; + u32 scan_timeout; mutex_lock(&ar->conf_mutex); @@ -5723,6 +5724,22 @@ static int ath10k_hw_scan(struct ieee80211_hw *hw, arg.channels[i] = req->channels[i]->center_freq; } + /* if duration is set, default dwell times will be overwritten */ + if (req->duration) { + arg.dwell_time_active = req->duration; + arg.dwell_time_passive = req->duration; + arg.burst_duration_ms = req->duration; + + scan_timeout = min_t(u32, arg.max_rest_time * + (arg.n_channels - 1) + (req->duration + + ATH10K_SCAN_CHANNEL_SWITCH_WMI_EVT_OVERHEAD) * + arg.n_channels, arg.max_scan_time + 200); + + } else { + /* Add a 200ms margin to account for event/command processing */ + scan_timeout = arg.max_scan_time + 200; + } + ret = ath10k_start_scan(ar, &arg); if (ret) { ath10k_warn(ar, "failed to start hw scan: %d\n", ret); @@ -5731,10 +5748,8 @@ static int ath10k_hw_scan(struct ieee80211_hw *hw, spin_unlock_bh(&ar->data_lock); } - /* Add a 200ms margin to account for event/command processing */ ieee80211_queue_delayed_work(ar->hw, &ar->scan.timeout, - msecs_to_jiffies(arg.max_scan_time + - 200)); + msecs_to_jiffies(scan_timeout)); exit: mutex_unlock(&ar->conf_mutex); @@ -8351,6 +8366,8 @@ int ath10k_mac_register(struct ath10k *ar) } wiphy_ext_feature_set(ar->hw->wiphy, NL80211_EXT_FEATURE_VHT_IBSS); + wiphy_ext_feature_set(ar->hw->wiphy, + NL80211_EXT_FEATURE_SET_SCAN_DWELL); /* * on LL hardware queues are managed entirely by the FW -- 1.9.1