Return-path: Received: from mail.bugwerft.de ([46.23.86.59]:38426 "EHLO mail.bugwerft.de" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S933472AbeFZUsl (ORCPT ); Tue, 26 Jun 2018 16:48:41 -0400 From: Daniel Mack To: ulf.hansson@linaro.org Cc: chris@printf.net, linux-mmc@vger.kernel.org, libertas-dev@lists.infradead.org, linux-wireless@vger.kernel.org, Daniel Mack Subject: [PATCH] libertas: fix return codes in if_sdio_suspend() Date: Tue, 26 Jun 2018 22:48:34 +0200 Message-Id: <20180626204834.14278-1-daniel@zonque.org> (sfid-20180626_224844_361743_19CDC862) Sender: linux-wireless-owner@vger.kernel.org List-ID: Prior to commit 573185cc7e64 ("mmc: core: Invoke sdio func driver's PM callbacks from the sdio bus"), the MMC core used to call into the power management functions of SDIO clients itself and removed the card if the return code was non-zero. IOW, the mmc handled errors gracefully and didn't upchain them to the pm core. Since this change, the mmc core relies on generic power management functions which treat all errors as a reason to cancel the suspend immediately. This causes suspend attempts to fail when the libertas driver is loaded. To fix this, power down the card explicitly in if_sdio_suspend() when we know we're about to lose power and return success. Also set a flag in these cases, and power up the card again in if_sdio_resume(). Signed-off-by: Daniel Mack Cc: Ulf Hansson Cc: Chris Ball --- drivers/net/wireless/marvell/libertas/dev.h | 1 + .../net/wireless/marvell/libertas/if_sdio.c | 28 +++++++++++++++---- 2 files changed, 23 insertions(+), 6 deletions(-) diff --git a/drivers/net/wireless/marvell/libertas/dev.h b/drivers/net/wireless/marvell/libertas/dev.h index dd1ee1f0af48..469134930026 100644 --- a/drivers/net/wireless/marvell/libertas/dev.h +++ b/drivers/net/wireless/marvell/libertas/dev.h @@ -104,6 +104,7 @@ struct lbs_private { u8 fw_ready; u8 surpriseremoved; u8 setup_fw_on_resume; + u8 power_up_on_resume; int (*hw_host_to_card) (struct lbs_private *priv, u8 type, u8 *payload, u16 nb); void (*reset_card) (struct lbs_private *priv); int (*power_save) (struct lbs_private *priv); diff --git a/drivers/net/wireless/marvell/libertas/if_sdio.c b/drivers/net/wireless/marvell/libertas/if_sdio.c index 2300e796c6ab..f43807663b1b 100644 --- a/drivers/net/wireless/marvell/libertas/if_sdio.c +++ b/drivers/net/wireless/marvell/libertas/if_sdio.c @@ -1290,15 +1290,23 @@ static void if_sdio_remove(struct sdio_func *func) static int if_sdio_suspend(struct device *dev) { struct sdio_func *func = dev_to_sdio_func(dev); - int ret; struct if_sdio_card *card = sdio_get_drvdata(func); + struct lbs_private *priv = card->priv; + int ret; mmc_pm_flag_t flags = sdio_get_host_pm_caps(func); + priv->power_up_on_resume = false; /* If we're powered off anyway, just let the mmc layer remove the * card. */ - if (!lbs_iface_active(card->priv)) - return -ENOSYS; + if (!lbs_iface_active(priv)) { + if (priv->fw_ready) { + priv->power_up_on_resume = true; + if_sdio_power_off(card); + } + + return 0; + } dev_info(dev, "%s: suspend: PM flags = 0x%x\n", sdio_func_id(func), flags); @@ -1306,9 +1314,14 @@ static int if_sdio_suspend(struct device *dev) /* If we aren't being asked to wake on anything, we should bail out * and let the SD stack power down the card. */ - if (card->priv->wol_criteria == EHS_REMOVE_WAKEUP) { + if (priv->wol_criteria == EHS_REMOVE_WAKEUP) { dev_info(dev, "Suspend without wake params -- powering down card\n"); - return -ENOSYS; + if (priv->fw_ready) { + priv->power_up_on_resume = true; + if_sdio_power_off(card); + } + + return 0; } if (!(flags & MMC_PM_KEEP_POWER)) { @@ -1321,7 +1334,7 @@ static int if_sdio_suspend(struct device *dev) if (ret) return ret; - ret = lbs_suspend(card->priv); + ret = lbs_suspend(priv); if (ret) return ret; @@ -1336,6 +1349,9 @@ static int if_sdio_resume(struct device *dev) dev_info(dev, "%s: resume: we're back\n", sdio_func_id(func)); + if (card->priv->power_up_on_resume) + if_sdio_power_on(card); + ret = lbs_resume(card->priv); return ret; -- 2.17.1