Return-path: Received: from mail-oi0-f46.google.com ([209.85.218.46]:33147 "EHLO mail-oi0-f46.google.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1751509AbeFWRdP (ORCPT ); Sat, 23 Jun 2018 13:33:15 -0400 Received: by mail-oi0-f46.google.com with SMTP id c6-v6so8929983oiy.0 for ; Sat, 23 Jun 2018 10:33:15 -0700 (PDT) MIME-Version: 1.0 In-Reply-To: References: <20180622144809.GA9773@redhat.com> From: Tom Psyborg Date: Sat, 23 Jun 2018 19:33:14 +0200 Message-ID: (sfid-20180623_193320_003109_9B3B3E1F) Subject: Re: mt76x2e MCU message 31 timed out To: Janusz Dziedzic Cc: Stanislaw Gruszka , linux-wireless , Felix Fietkau Content-Type: text/plain; charset="UTF-8" Sender: linux-wireless-owner@vger.kernel.org List-ID: Do they sell dual-band version with ext amplifiers? I saw there is 5GHz version with 25dBm power modification... On 22/06/2018, Janusz Dziedzic wrote: > 2018-06-22 16:48 GMT+02:00 Stanislaw Gruszka : >> Hi >> >> On Fri, Jun 22, 2018 at 10:37:35AM +0200, Janusz Dziedzic wrote: >>> Have this card in my laptop: >>> 02:00.0 Network controller: MEDIATEK Corp. Device 7612 >>> >>> [ 8.478104] mt76x2e 0000:02:00.0: ASIC revision: 76120044 >>> [ 8.489582] mt76x2e 0000:02:00.0: ROM patch already applied >>> [ 8.833476] mt76x2e 0000:02:00.0: Firmware Version: 0.0.00 >>> [ 8.833477] mt76x2e 0000:02:00.0: Build: 1 >>> [ 8.833479] mt76x2e 0000:02:00.0: Build Time: 201507311614____ >>> [ 8.856115] mt76x2e 0000:02:00.0: Firmware running! >>> [ 9.558075] mt76x2e 0000:02:00.0 wlp2s0: renamed from wlan1 >> >> I'm just curious. Does the card was installed in the laptop by default? >> If so what is the model of the laptop? >> > No, I just buy this card on aliexpress and put into some dell (MTK > MT7612 2x2 half miniPCIE). > >>> Linux test4 4.17.0-rc7+ #5 SMP Mon May 28 12:35:22 CEST 2018 x86_64 >>> GNU/Linux >>> >>> Seems iw scan works correctly and first assoc. After will run some >>> traffic (iperf in such case) get: >>> >>> [ 432.372081] wlp2s0: associate with 52:b4:f7:f0:16:c2 (try 2/3) >>> [ 432.375255] wlp2s0: RX AssocResp from 52:b4:f7:f0:16:c2 >>> (capab=0x511 status=0 aid=2) >>> [ 432.375336] wlp2s0: associated >>> [ 432.451097] IPv6: ADDRCONF(NETDEV_CHANGE): wlp2s0: link becomes ready >>> [ 522.562157] mt76x2e 0000:02:00.0: MCU message 31 (seq 13) timed out >>> [ 524.610281] mt76x2e 0000:02:00.0: MCU message 31 (seq 14) timed out >>> [ 526.658384] mt76x2e 0000:02:00.0: MCU message 31 (seq 15) timed out >>> [ 528.258455] mt76x2e 0000:02:00.0: MCU message 30 (seq 1) timed out >>> [ 529.282499] mt76x2e 0000:02:00.0: MCU message 30 (seq 2) timed out >>> [ 530.402544] mt76x2e 0000:02:00.0: MCU message 30 (seq 3) timed out >>> [ 531.426587] mt76x2e 0000:02:00.0: MCU message 30 (seq 4) timed out >>> [ 531.427444] wlp2s0: authenticate with 52:b4:f7:f0:14:ac >>> [ 532.450624] mt76x2e 0000:02:00.0: MCU message 30 (seq 5) timed out >>> [ 533.474666] mt76x2e 0000:02:00.0: MCU message 30 (seq 6) timed out >>> [ 534.498709] mt76x2e 0000:02:00.0: MCU message 30 (seq 7) timed out >>> [ 535.522736] mt76x2e 0000:02:00.0: MCU message 30 (seq 8) timed out >>> [ 535.522807] wlp2s0: send auth to 52:b4:f7:f0:14:ac (try 1/3) >>> [ 535.726740] wlp2s0: send auth to 52:b4:f7:f0:14:ac (try 2/3) >>> [ 535.930742] wlp2s0: send auth to 52:b4:f7:f0:14:ac (try 3/3) >>> [ 536.134747] wlp2s0: authentication with 52:b4:f7:f0:14:ac timed out >> >> I observed quite similar issue on some rt2800 devices when >> I applied this patch: >> https://github.com/sgruszka/wireless-drivers-next/commit/846d205edd8c36d1b7828fee54bf4cf40bf8cb1a >> It works on some devices and does not work on others with similar >> symptoms - correctly associate but stop to work as soon as some >> data traffic is performed. >> >> So, I would check if send IEEE80211_TX_CTL_RATE_CTRL_PROBE frames >> with qsel = MT_QSEL_EDCA would help. >> > Thanks, will check this. > >> Another thing to try is checkout vendor driver and see if there is need >> to add extra code if device is_mt7612() . >> >> Regards >> Stanislaw > > > > -- > Janusz Dziedzic >