Return-path: Received: from alexa-out-ams-01.qualcomm.com ([185.23.61.162]:1826 "EHLO alexa-out-ams-01.qualcomm.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S2388510AbeGXIuG (ORCPT ); Tue, 24 Jul 2018 04:50:06 -0400 From: Maya Erez To: Kalle Valo Cc: Alexei Avshalom Lazar , linux-wireless@vger.kernel.org, wil6210@qti.qualcomm.com, Maya Erez Subject: [PATCH v2 15/19] wil6210: set default 3-MSI Date: Tue, 24 Jul 2018 10:44:36 +0300 Message-Id: <1532418280-5849-16-git-send-email-merez@codeaurora.org> (sfid-20180724_100227_254975_04F1DAA7) In-Reply-To: <1532418280-5849-1-git-send-email-merez@codeaurora.org> References: <1532418280-5849-1-git-send-email-merez@codeaurora.org> Sender: linux-wireless-owner@vger.kernel.org List-ID: From: Alexei Avshalom Lazar Single MSI is the current default configuration. With multiple MSI interrupts configuration, Tx/Rx processing could run in parallel on different CPU cores and allow better balance between the cores. Signed-off-by: Alexei Avshalom Lazar Signed-off-by: Maya Erez --- drivers/net/wireless/ath/wil6210/pcie_bus.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/net/wireless/ath/wil6210/pcie_bus.c b/drivers/net/wireless/ath/wil6210/pcie_bus.c index e44b4ad..89119e7 100644 --- a/drivers/net/wireless/ath/wil6210/pcie_bus.c +++ b/drivers/net/wireless/ath/wil6210/pcie_bus.c @@ -24,9 +24,9 @@ #include #include -static int n_msi = 1; +static int n_msi = 3; module_param(n_msi, int, 0444); -MODULE_PARM_DESC(n_msi, " Use MSI interrupt: 0 - use INTx, 1 - (default) - single, or 3"); +MODULE_PARM_DESC(n_msi, " Use MSI interrupt: 0 - use INTx, 1 - single, or 3 - (default) "); bool ftm_mode; module_param(ftm_mode, bool, 0444); -- 1.9.1