Return-path: Received: from paleale.coelho.fi ([176.9.41.70]:45342 "EHLO farmhouse.coelho.fi" rhost-flags-OK-OK-OK-FAIL) by vger.kernel.org with ESMTP id S1727702AbeHaMiE (ORCPT ); Fri, 31 Aug 2018 08:38:04 -0400 From: Luca Coelho To: johannes@sipsolutions.net Cc: linux-wireless@vger.kernel.org, Ilan Peer , Luca Coelho Date: Fri, 31 Aug 2018 11:31:10 +0300 Message-Id: <20180831083130.15525-9-luca@coelho.fi> (sfid-20180831_103154_992783_667BB667) In-Reply-To: <20180831083130.15525-1-luca@coelho.fi> References: <20180831083130.15525-1-luca@coelho.fi> Subject: [PATCH 08/28] mac80211: Fix station bandwidth setting after channel switch Sender: linux-wireless-owner@vger.kernel.org List-ID: From: Ilan Peer When performing a channel switch flow for a managed interface, the flow did not update the bandwidth of the AP station and the rate scale algorithm. In case of a channel width downgrade, this would result with the rate scale algorithm using a bandwidth that does not match the interface channel configuration. Fix this by updating the AP station bandwidth and rate scaling algorithm before the actual channel change in case of a bandwidth downgrade, or after the actual channel change in case of a bandwidth upgrade. Signed-off-by: Ilan Peer Signed-off-by: Luca Coelho --- net/mac80211/mlme.c | 53 +++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 53 insertions(+) diff --git a/net/mac80211/mlme.c b/net/mac80211/mlme.c index 7fb9957359a3..4b53bbd10a3a 100644 --- a/net/mac80211/mlme.c +++ b/net/mac80211/mlme.c @@ -1073,6 +1073,10 @@ static void ieee80211_chswitch_work(struct work_struct *work) */ if (sdata->reserved_chanctx) { + struct ieee80211_supported_band *sband = NULL; + struct sta_info *mgd_sta = NULL; + enum ieee80211_sta_rx_bandwidth bw = IEEE80211_STA_RX_BW_20; + /* * with multi-vif csa driver may call ieee80211_csa_finish() * many times while waiting for other interfaces to use their @@ -1081,6 +1085,48 @@ static void ieee80211_chswitch_work(struct work_struct *work) if (sdata->reserved_ready) goto out; + if (sdata->vif.bss_conf.chandef.width != + sdata->csa_chandef.width) { + /* + * For managed interface, we need to also update the AP + * station bandwidth and align the rate scale algorithm + * on the bandwidth change. Here we only consider the + * bandwidth of the new channel definition (as channel + * switch flow does not have the full HT/VHT/HE + * information), assuming that if additional changes are + * required they would be done as part of the processing + * of the next beacon from the AP. + */ + switch (sdata->csa_chandef.width) { + case NL80211_CHAN_WIDTH_20_NOHT: + case NL80211_CHAN_WIDTH_20: + default: + bw = IEEE80211_STA_RX_BW_20; + break; + case NL80211_CHAN_WIDTH_40: + bw = IEEE80211_STA_RX_BW_40; + break; + case NL80211_CHAN_WIDTH_80: + bw = IEEE80211_STA_RX_BW_80; + break; + case NL80211_CHAN_WIDTH_80P80: + case NL80211_CHAN_WIDTH_160: + bw = IEEE80211_STA_RX_BW_160; + break; + } + + mgd_sta = sta_info_get(sdata, ifmgd->bssid); + sband = + local->hw.wiphy->bands[sdata->csa_chandef.chan->band]; + } + + if (sdata->vif.bss_conf.chandef.width > + sdata->csa_chandef.width) { + mgd_sta->sta.bandwidth = bw; + rate_control_rate_update(local, sband, mgd_sta, + IEEE80211_RC_BW_CHANGED); + } + ret = ieee80211_vif_use_reserved_context(sdata); if (ret) { sdata_info(sdata, @@ -1091,6 +1137,13 @@ static void ieee80211_chswitch_work(struct work_struct *work) goto out; } + if (sdata->vif.bss_conf.chandef.width < + sdata->csa_chandef.width) { + mgd_sta->sta.bandwidth = bw; + rate_control_rate_update(local, sband, mgd_sta, + IEEE80211_RC_BW_CHANGED); + } + goto out; } -- 2.18.0