Return-path: Received: from mx1.redhat.com ([209.132.183.28]:44418 "EHLO mx1.redhat.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1726736AbeIRRQO (ORCPT ); Tue, 18 Sep 2018 13:16:14 -0400 Date: Tue, 18 Sep 2018 13:43:57 +0200 From: Stanislaw Gruszka To: Lorenzo Bianconi Cc: nbd@nbd.name, linux-wireless@vger.kernel.org, linux-mediatek@lists.infradead.org Subject: Re: [PATCH] mt76x0: run vco calibration for each channel configuration Message-ID: <20180918114356.GB15285@redhat.com> (sfid-20180918_134409_178616_ADB90F98) References: <20180907211312.17918-1-lorenzo.bianconi@redhat.com> MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii In-Reply-To: <20180907211312.17918-1-lorenzo.bianconi@redhat.com> Sender: linux-wireless-owner@vger.kernel.org List-ID: On Fri, Sep 07, 2018 at 11:13:12PM +0200, Lorenzo Bianconi wrote: > According to vendor sdk, vco calibration has to be executed > for each channel configuration whereas mcu calibration has to be > performed during channel scanning. This patch fixes the mt76x0 > monitor mode issue since in that configuration vco calibration > was never executed > > Fixes: 10de7a8b4ab9 ("mt76x0: phy files") > Tested-by: Sid Hayn > Signed-off-by: Lorenzo Bianconi Acked-by: Stanislaw Gruszka