DMARC-Filter: OpenDMARC Filter v1.3.2 mail.kernel.org CA95F204EC
MIME-Version: 1.0
In-Reply-To: <20181016154957.GA8730@redhat.com>
References: <1539334591-9965-5-git-send-email-sgruszka@redhat.com>
 <CAKR_QVJ60VTDjyC59BEDsRKrKR495xjGwob0QqvX333L+L+=Zg@mail.gmail.com>
 <20181012113656.GB2118@redhat.com> <CAKR_QVKU8ZFs6SC0Bm8VFKv82uNah+mZMKfCqCB+PRe6Ew2pcA@mail.gmail.com>
 <20181012120329.GD2118@redhat.com> <CAKR_QVKKiRFASfB=Rs7eUXKNt-Sqm7dTp2tBikOBatJxKvkJ0w@mail.gmail.com>
 <20181012122630.GB2668@redhat.com> <CAKR_QVLtJGzpBuz-BBi5yzFPoTUnadDdEXcwnR4XrB3DuWchjQ@mail.gmail.com>
 <20181016080922.GB4158@redhat.com> <CAKR_QVJ9T3EOhMoWPUv3x7-+NS54Y7cCRafM34pqve_4eV-zJQ@mail.gmail.com>
 <20181016154957.GA8730@redhat.com>
From:   Tom Psyborg <pozega.tomislav@gmail.com>
Date:   Wed, 17 Oct 2018 15:25:58 +0200
Message-ID: <CAKR_QV+p_BP+xvqc65gHjm8t6fRNwfTRwKixCn7DN9+LjG-n3A@mail.gmail.com>
Subject: Re: [PATCH v4 4/8] rt2800: fix registers init for MT7620
To:     Stanislaw Gruszka <sgruszka@redhat.com>
Cc:     linux-wireless@vger.kernel.org,
        Daniel Golle <daniel@makrotopia.org>,
        Mathias Kresin <dev@kresin.me>, Felix Fietkau <nbd@nbd.name>
Content-Type: text/plain; charset="UTF-8"
Sender: linux-wireless-owner@vger.kernel.org
Precedence: bulk

On 16/10/2018, Stanislaw Gruszka <sgruszka@redhat.com> wrote:
> Hello
>
> On Tue, Oct 16, 2018 at 01:32:18PM +0200, Tom Psyborg wrote:
>> I am sending you two builds privately so please check if there are any
>> differences between the two builds and report back. Thanks.
>
> I extracted rt2800lib.ko module from provided images, did disassembly via:
>
> ./staging_dir/toolchain-mipsel_24kc_gcc-7.3.0_musl/bin/mipsel-openwrt-linux-objdump
> \
>  -d -r --prefix-addresses ~/rt2800lib-BUILDn.ko  > ~/BUILDn.dump.txt
>
> command and compered disassembled code. Here is difference:
>
> $ diff -up  BUILD1.dump.txt BUILD2.dump.txt
> --- BUILD1.dump.txt	2018-10-16 16:40:34.834220838 +0200
> +++ BUILD2.dump.txt	2018-10-16 16:40:40.187219211 +0200
> @@ -1,5 +1,5 @@
>
> -/home/stasiu/rt2800lib-BUILD1.ko:     file format elf32-tradlittlemips
> +/home/stasiu/rt2800lib-BUILD2.ko:     file format elf32-tradlittlemips
>
>
>  Disassembly of section .text:
> @@ -9374,7 +9374,7 @@ Disassembly of section .text:
>  00007f80 <rt2800_clear_beacon+0x224> jalr	v0
>  00007f84 <rt2800_clear_beacon+0x228> move	a0,s0
>  00007f88 <rt2800_clear_beacon+0x22c> lhu	v1,732(s0)
> -00007f8c <rt2800_clear_beacon+0x230> li	v0,21392
> +00007f8c <rt2800_clear_beacon+0x230> li	v0,25426
>  00007f90 <rt2800_clear_beacon+0x234> bne	v1,v0,0000810c
> <rt2800_clear_beacon+0x3b0>
>  00007f94 <rt2800_clear_beacon+0x238> li	a2,1025
>  00007f98 <rt2800_clear_beacon+0x23c> lw	v0,4(s0)
>
> There is no difference in init_registers (which is inlined in
> rt2800_enable_radio). The only difference is in some number
> rt2800_clear_beacon() function.
>
> Regards
> Stanislaw
>

i meant you try it on your nexx device. and post dmesg if you can boot them