DMARC-Filter: OpenDMARC Filter v1.3.2 mail.kernel.org BBB4C2075B
Date:   Thu, 13 Dec 2018 06:45:22 -0800
From:   Tony Lindgren <tony@atomide.com>
To:     Ricardo Salveti <rsalveti@rsalveti.net>
Cc:     eyalr@ti.com, John Stultz <john.stultz@linaro.org>,
        linux-wireless@vger.kernel.org, anders.roxell@linaro.org
Subject: Re: [EXTERNAL] Re: wlcore getting stuck on hikey after the runtime
 PM autosuspend support change
Message-ID: <20181213144522.GO39861@atomide.com>
References: <CALAqxLUVajBw_PkyhA0s=FhQQHWu1FBEMX+4oDTStRXr6L5Txw@mail.gmail.com>
 <20181211201221.GY39861@atomide.com>
 <CAHYQr0qffa_G2ZVnSsDfjqSgxuBBZB+8e6ZODpAWV_TMhqzFYg@mail.gmail.com>
 <CAHYQr0qhqce2QcwMLRMWnqhZTL4KzHKJLzt6tfCNLHUcEt9pyQ@mail.gmail.com>
 <20181212014556.GC39861@atomide.com>
 <c8625c42f04a4721b7efb7d7b6b3931c@ti.com>
 <20181212183116.GH39861@atomide.com>
 <CAHYQr0ojkf3CvFb_zuEK4Vuz1w-rm9Sb=+dk5BkqYkWoxy8+aQ@mail.gmail.com>
 <9060b4655e064665a1812d9fae00f1ec@ti.com>
 <CAHYQr0r4eQNSqZEr-vbCiVN6G_O1CXxX9cxemANSRY-jqDMZ=A@mail.gmail.com>
MIME-Version: 1.0
Content-Type: text/plain; charset=us-ascii
Content-Disposition: inline
In-Reply-To: <CAHYQr0r4eQNSqZEr-vbCiVN6G_O1CXxX9cxemANSRY-jqDMZ=A@mail.gmail.com>
User-Agent: Mutt/1.10.1 (2018-07-13)
Sender: linux-wireless-owner@vger.kernel.org
Precedence: bulk

* Ricardo Salveti <rsalveti@rsalveti.net> [181213 13:53]:
> I tried just increasing WL1271_PRE_POWER_ON_SLEEP from 20ms to 50ms
> (which gets used before calling wl12xx_sdio_power_on), and that was
> already enough to fix my issues on both hikey and beaglebone black
> wireless.

OK good to hear that helps :)

> Should we define another pre power on sleep specifically for the sdio
> case (and use directly in wl12xx_sdio_power_on)?

I'd probably prefer to just increase WL1271_PRE_POWER_ON_SLEEP,
chances are the same delay is needed in all cases.

Up to Eyeal to decide though as far as I'm concerned.

Regards,

Tony