From:   lorenzo@kernel.org
To:     linux-wireless@vger.kernel.org
Subject: [PATCH RESEND 0/4] do not use sg if not properly supported by usb controller
Date:   Tue, 12 Feb 2019 14:42:38 +0100
Message-Id: <cover.1549977282.git.lorenzo@kernel.org>
MIME-Version: 1.0
Content-Transfer-Encoding: 8bit
Sender: linux-wireless-owner@vger.kernel.org
Precedence: bulk

From: Lorenzo Bianconi <lorenzo@kernel.org>

Use linear fragment and not a single usb scatter-gather buffer in mt76u
{tx,rx} datapath if the usb controller has sg data length constraints.
Moreover add disable_usb_sg module parameter in order to explicitly
disable scatter-gather. SG I/O is not supported by all host drivers and
some users have reported sg issues on AMD IOMMU.
This series has been tested on AMD IOMMU cpus/motherboards and on rpi3+

Changes since RFC:
- rebased on top of 'fix multiple issues in mt76u error path'
  https://patchwork.kernel.org/cover/10804919/

I am resending the series since the first attempt seems to be rejected by
the ML

Lorenzo Bianconi (4):
  mt76: usb: move mt76u_check_sg in usb.c
  mt76: usb: do not use sg buffers for mcu messages
  mt76: usb: use a linear buffer for tx/rx datapath if sg is not
    supported
  mt76: usb: introduce disable_usb_sg parameter

 drivers/net/wireless/mediatek/mt76/mt76.h     |  14 +-
 .../net/wireless/mediatek/mt76/mt76x0/usb.c   |   2 +-
 .../wireless/mediatek/mt76/mt76x02_usb_mcu.c  |   3 +-
 .../wireless/mediatek/mt76/mt76x2/usb_init.c  |   2 +-
 drivers/net/wireless/mediatek/mt76/usb.c      | 133 +++++++++++++-----
 drivers/net/wireless/mediatek/mt76/usb_mcu.c  |   5 +-
 6 files changed, 105 insertions(+), 54 deletions(-)

-- 
2.20.1