Date:   Tue, 26 Mar 2019 07:16:19 +0100
From:   Stanislaw Gruszka <sgruszka@redhat.com>
To:     Tom Psyborg <pozega.tomislav@gmail.com>
Cc:     linux-wireless@vger.kernel.org, kvalo@codeaurora.org,
        daniel@makrotopia.org
Subject: Re: [PATCH 2/2] rt2x00: enable experimental MFP with HW crypt
Message-ID: <20190326061618.GA7200@redhat.com>
References: <20190313091252.GB2663@redhat.com>
 <CAKR_QV+sFc6J97f5dtW9OtxGoEj5udB=fY5qAb3_QgF4jfqEVA@mail.gmail.com>
 <20190313130910.GD2003@redhat.com>
 <CAKR_QVLB9k0bGiRW9ON3PeQR1ZoMfWbrXg3W+Bg4N4G+9pAsZg@mail.gmail.com>
 <20190313140607.GE2003@redhat.com>
 <CAKR_QV+gEJEE2+hwfE1wsF5mdEZVDGtNskivcpFUutGEbwKyKg@mail.gmail.com>
 <20190313155028.GB5302@redhat.com>
 <CAKR_QV+=i_Sp26zCkTC9cAHrhVLq4w0FoxLVmD-T3wFyd-ruEQ@mail.gmail.com>
 <20190325142537.GA13884@redhat.com>
 <CAKR_QV+zUBKk=8UHiCnWQg9XCdB8zbMEcVSKEO7vFOR0Q2Yesw@mail.gmail.com>
MIME-Version: 1.0
Content-Type: text/plain; charset=us-ascii
Content-Disposition: inline
In-Reply-To: <CAKR_QV+zUBKk=8UHiCnWQg9XCdB8zbMEcVSKEO7vFOR0Q2Yesw@mail.gmail.com>
User-Agent: Mutt/1.11.3 (2019-02-01)
Sender: linux-wireless-owner@vger.kernel.org
Precedence: bulk

On Tue, Mar 26, 2019 at 02:54:25AM +0100, Tom Psyborg wrote:
> On 25/03/2019, Stanislaw Gruszka <sgruszka@redhat.com> wrote:
> > On Thu, Mar 14, 2019 at 03:02:14PM +0100, Tom Psyborg wrote:
> >> On 13/03/2019, Stanislaw Gruszka <sgruszka@redhat.com> wrote:
> >>
> >> >
> >> > There should be no difference between enabling MFP with nohwcrypt and
> >> > without nohwcrypt,
> >>
> >> well there is. do you still want me to resend this with MFP enabled
> >> unconditionally for all chips?
> >
> > Please share your hostapd config file with MFP enabled.
> >
> > Stanislaw
> >
> >
> 
> ctrl_interface=/var/run/wpa_supplicant
> eapol_version=1
> ap_scan=1
> fast_reauth=1
> pmf=2
> network={
> 	ssid="OpenWrt"
> 	proto=WPA2
> 	key_mgmt=WPA-PSK
> 	pairwise=CCMP
> 	group=CCMP
> 	ieee80211w=2
> 	psk="u7e5hwh46uz7ergv"
> 	wpa_ptk_rekey=60
> }

This is supplicant config, I asked for hostapd. You can find it in
/tmp/run/hostapd-phy0.conf (I assume you use openwrt on QCA router,
or you use proprietary firmware ?).

Stanislaw