From:   Erik Stromdahl <erik.stromdahl@gmail.com>
To:     kvalo@qca.qualcomm.com, linux-wireless@vger.kernel.org,
        ath10k@lists.infradead.org
Cc:     Erik Stromdahl <erik.stromdahl@gmail.com>
Subject: [PATCH 0/6] ath10k: SDIO and high latency patches from Silex
Date:   Tue,  9 Apr 2019 21:08:45 +0200
Message-Id: <20190409190851.4557-1-erik.stromdahl@gmail.com>
MIME-Version: 1.0
Content-Transfer-Encoding: 8bit
Sender: linux-wireless-owner@vger.kernel.org
Precedence: bulk

This series adds a few more fixes for SDIO and high latency devices.

I have had these on my private tree for quite some time now so they
should be considered fairly well tested.

4 out of 6 patches are from Alagu Sankar at Silex.
I have made some adjustments to some of them in order to make them
smaller and easier to review.

Alagu Sankar (4):
  ath10k: use clean packet headers
  ath10k: high latency fixes for beacon buffer
  ath10k: sdio: read RX packets in bundles
  ath10k: sdio: add MSDU ID allocation in HTT TX path

Erik Stromdahl (2):
  ath10k: sdio: add missing error check
  ath10k: sdio: replace skb_trim with explicit set of skb->len

 drivers/net/wireless/ath/ath10k/htc.c    |  1 +
 drivers/net/wireless/ath/ath10k/htt_rx.c |  4 +-
 drivers/net/wireless/ath/ath10k/htt_tx.c | 16 ++++-
 drivers/net/wireless/ath/ath10k/hw.c     |  2 +
 drivers/net/wireless/ath/ath10k/mac.c    | 31 +++++++---
 drivers/net/wireless/ath/ath10k/sdio.c   | 78 +++++++++++++++++++-----
 drivers/net/wireless/ath/ath10k/sdio.h   |  2 +
 7 files changed, 109 insertions(+), 25 deletions(-)

-- 
2.19.1