From:   Erik Stromdahl <erik.stromdahl@gmail.com>
To:     kvalo@qca.qualcomm.com, linux-wireless@vger.kernel.org,
        ath10k@lists.infradead.org
Cc:     Erik Stromdahl <erik.stromdahl@gmail.com>
Subject: [PATCH v2 0/5] ath10k: SDIO and high latency patches from Silex
Date:   Wed, 17 Apr 2019 21:14:58 +0200
Message-Id: <20190417191503.18814-1-erik.stromdahl@gmail.com>
MIME-Version: 1.0
Content-Transfer-Encoding: 8bit
Sender: linux-wireless-owner@vger.kernel.org
Precedence: bulk

This series adds a few more fixes for SDIO and high latency devices.

I have had these on my private tree for quite some time now so they
should be considered fairly well tested.

changes since v1:

Patch "ath10k: use clean packet headers" was renamed to
"ath10k: add initialization of HTC header" and PLL stuff was removed.

Patch "ath10k: sdio: add MSDU ID allocation in HTT TX path"
was removed since it became redundant after I had added Kalle's and
Wen's patches to my tree.

Patch "ath10k: sdio: replace skb_trim with explicit set of skb->len"
was rewritten and renamed to "ath10k: sdio: remove skb_trim in TX path"

Alagu Sankar (3):
  ath10k: add initialization of HTC header
  ath10k: high latency fixes for beacon buffer
  ath10k: sdio: read RX packets in bundles

Erik Stromdahl (2):
  ath10k: sdio: add missing error check
  ath10k: sdio: remove skb_trim in TX path

 drivers/net/wireless/ath/ath10k/htc.c  |   1 +
 drivers/net/wireless/ath/ath10k/mac.c  |  31 ++++++--
 drivers/net/wireless/ath/ath10k/sdio.c | 103 ++++++++++++++++++++-----
 drivers/net/wireless/ath/ath10k/sdio.h |   4 +
 4 files changed, 112 insertions(+), 27 deletions(-)

-- 
2.19.1