Received-SPF: pass (google.com: best guess record for domain of linux-wireless-owner@vger.kernel.org designates 209.132.180.67 as permitted sender) client-ip=209.132.180.67;
From:   Larry Finger <Larry.Finger@lwfinger.net>
To:     kvalo@codeaurora.org
Cc:     linux-wireless@vger.kernel.org, pkshih@realtek.com,
        Larry Finger <Larry.Finger@lwfinger.net>
Subject: [PATCH 5/5] rtlwifi: rtl8192cu: Fix value set in descriptor
Date:   Mon, 12 Aug 2019 14:27:41 -0500
Message-Id: <20190812192741.14479-1-Larry.Finger@lwfinger.net>
MIME-Version: 1.0
Content-Transfer-Encoding: 8bit
Sender: linux-wireless-owner@vger.kernel.org
Precedence: bulk

In the process of converting the bit manipulation macros were converted
to use GENMASK(), the compiler reported a value too big for the field.
The offending statement was trying to write 0x100 into a 5-bit field.
An accompaning comment says to set bit 3, thus the code is changed
appropriately.

This error has been in the driver since its initial submission.

Fixes: 29d00a3e46bb ("rtlwifi: rtl8192cu: Add routine trx")
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
---
 drivers/net/wireless/realtek/rtlwifi/rtl8192cu/trx.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/wireless/realtek/rtlwifi/rtl8192cu/trx.c b/drivers/net/wireless/realtek/rtlwifi/rtl8192cu/trx.c
index 0020adc004a5..9b5c7ec6b6f7 100644
--- a/drivers/net/wireless/realtek/rtlwifi/rtl8192cu/trx.c
+++ b/drivers/net/wireless/realtek/rtlwifi/rtl8192cu/trx.c
@@ -611,7 +611,7 @@ void rtl92cu_fill_fake_txdesc(struct ieee80211_hw *hw, u8 *pdesc,
 		SET_TX_DESC_NAV_USE_HDR(pdesc, 1);
 	} else {
 		SET_TX_DESC_HWSEQ_EN(pdesc, 1); /* Hw set sequence number */
-		SET_TX_DESC_PKT_ID(pdesc, 0x100); /* set bit3 to 1. */
+		SET_TX_DESC_PKT_ID(pdesc, BIT(3)); /* set bit3 to 1. */
 	}
 	SET_TX_DESC_USE_RATE(pdesc, 1); /* use data rate which is set by Sw */
 	SET_TX_DESC_OWN(pdesc, 1);
-- 
2.22.0