Received: by 2002:a25:8b12:0:0:0:0:0 with SMTP id i18csp4231682ybl; Tue, 20 Aug 2019 08:51:07 -0700 (PDT) X-Google-Smtp-Source: APXvYqy6P5YMmANEIaYEWDGKsblAvnjc8PgZ7mx3+k5p6l1gDOTnhktNZ4qfY9oFcY7yMihkE4w3 X-Received: by 2002:a17:90a:ec07:: with SMTP id l7mr650440pjy.39.1566316267559; Tue, 20 Aug 2019 08:51:07 -0700 (PDT) ARC-Seal: i=1; a=rsa-sha256; t=1566316267; cv=none; d=google.com; s=arc-20160816; b=T6okx83tpYJq3a8du3DFvem38RHzy5Pfw54tdUMAE1WYImrgpLaBNOVLAvnxcC1cDV 5xodNaQXbu2wbwoPTuskvtTMh+e/+kpVVEp6kkG/N5CmDkuJjcHhxbqYwDoHUFgCUvCb Xqh7unpr4ccd4UPnXtb2lO7huKoOlWUk3MasKQXz2RC0J5RWxRJuqo+nmD4EeP/zkkob etmxZcOswZmP0ehPprndJLmPXiDtHBK6preG0iGvHsr0nDg3yn5dyMzyAzBBLk652hkh M6EvTe7Zo1Adsf45JmPUmy1cQm1xUCdSmTZUvHIVJgVY9uQfqe7J9CHZOBE0iYMe9shv zOBg== ARC-Message-Signature: i=1; a=rsa-sha256; c=relaxed/relaxed; d=google.com; s=arc-20160816; h=list-id:precedence:sender:references:in-reply-to:message-id:date :subject:cc:to:from:dmarc-filter:dkim-signature:dkim-signature; bh=9/i3UNGcKJtGXAypD/ON2o1D2DdTNdZz5cjcdOpGNRg=; b=SOj0PeGag9TfzJDGGHzi9OtokTEDlxWl5ApwSg5by/Ys6D1jzPfMZjWYg7H24EEmOL 68LoBBZhQveTX94SoPXaDM8o2HgGZIC70Mlb0ekWV+OEnhYD5UGnyzAvoZYn8nE3y158 h4JTOYBCUw6VgsQgzvcgKG6CWGPYUQPtt4dAOQgxNghSSvOU3P+wwuDtWGdituoS+nbU 3yIEeFyMXYxu4PTO/TbwlwQYnIhcVkRqkztq+bkWsFWW3MG75NBWmpq8GHT3YgkJyWf0 TpbXV/l0QBJdRKwHGZV9UejAA9CTZ1roaorU8VvqG+cveTl0JmLliuda9lHvpfVulPwM S8yA== ARC-Authentication-Results: i=1; mx.google.com; dkim=pass header.i=@codeaurora.org header.s=default header.b=jnK9ddLY; dkim=pass header.i=@codeaurora.org header.s=default header.b=hCocCzX5; spf=pass (google.com: best guess record for domain of linux-wireless-owner@vger.kernel.org designates 209.132.180.67 as permitted sender) smtp.mailfrom=linux-wireless-owner@vger.kernel.org Return-Path: Received: from vger.kernel.org (vger.kernel.org. [209.132.180.67]) by mx.google.com with ESMTP id w6si12543743pge.395.2019.08.20.08.50.53; Tue, 20 Aug 2019 08:51:07 -0700 (PDT) Received-SPF: pass (google.com: best guess record for domain of linux-wireless-owner@vger.kernel.org designates 209.132.180.67 as permitted sender) client-ip=209.132.180.67; Authentication-Results: mx.google.com; dkim=pass header.i=@codeaurora.org header.s=default header.b=jnK9ddLY; dkim=pass header.i=@codeaurora.org header.s=default header.b=hCocCzX5; spf=pass (google.com: best guess record for domain of linux-wireless-owner@vger.kernel.org designates 209.132.180.67 as permitted sender) smtp.mailfrom=linux-wireless-owner@vger.kernel.org Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1730205AbfHTPu0 (ORCPT + 99 others); Tue, 20 Aug 2019 11:50:26 -0400 Received: from smtp.codeaurora.org ([198.145.29.96]:46116 "EHLO smtp.codeaurora.org" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1729820AbfHTPuZ (ORCPT ); Tue, 20 Aug 2019 11:50:25 -0400 Received: by smtp.codeaurora.org (Postfix, from userid 1000) id A2CCA61BB4; Tue, 20 Aug 2019 15:49:40 +0000 (UTC) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/simple; d=codeaurora.org; s=default; t=1566316220; bh=Jtb/4TRt17DN2bYOik7Tx9hWHYkvpXwVKBRNSG5SnQc=; h=From:To:Cc:Subject:Date:In-Reply-To:References:From; b=jnK9ddLYGA4Gz+AX40P8hk0gqgGidPMp8ceR35MjyjhUWyeUESKBdiWA9lDf1ZFiO fkBSmAF/2MQvsmb91iUc0taScTaKj655OxUVRhN+6HUC9nyWniZr9K56McyKkMvJEQ fDG01nZvTdtRZKJQZVEgQm0pG7CrseBWfuBeoTfQ= X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on pdx-caf-mail.web.codeaurora.org X-Spam-Level: X-Spam-Status: No, score=-2.7 required=2.0 tests=ALL_TRUSTED,BAYES_00, DKIM_INVALID,DKIM_SIGNED,SPF_NONE autolearn=no autolearn_force=no version=3.4.0 Received: from potku.adurom.net (88-114-240-156.elisa-laajakaista.fi [88.114.240.156]) (using TLSv1.2 with cipher ECDHE-RSA-AES128-SHA256 (128/128 bits)) (No client certificate requested) (Authenticated sender: kvalo@smtp.codeaurora.org) by smtp.codeaurora.org (Postfix) with ESMTPSA id 53A9E61AE7; Tue, 20 Aug 2019 15:49:23 +0000 (UTC) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/simple; d=codeaurora.org; s=default; t=1566316167; bh=Jtb/4TRt17DN2bYOik7Tx9hWHYkvpXwVKBRNSG5SnQc=; h=From:To:Cc:Subject:Date:In-Reply-To:References:From; b=hCocCzX5QY+wYsRnJv1wotuISGkRLTgGUswIOa/mBQIosyKTTWq7GvhSYs86mjWi7 jTHByNZvBMxlEMP2khYX9jSh+PKvLNf0hsPJDnNF78TrBCa0Cs0MTvL8/PJjEm/g32 yHp9MqCdcBGyBaHlS054zM4RfIlWS4INQNT/GG70= DMARC-Filter: OpenDMARC Filter v1.3.2 smtp.codeaurora.org 53A9E61AE7 Authentication-Results: pdx-caf-mail.web.codeaurora.org; dmarc=none (p=none dis=none) header.from=codeaurora.org Authentication-Results: pdx-caf-mail.web.codeaurora.org; spf=none smtp.mailfrom=kvalo@codeaurora.org From: Kalle Valo To: linux-wireless@vger.kernel.org Cc: ath11k@lists.infradead.org, devicetree@vger.kernel.org Subject: [PATCH 23/49] ath11k: add hal_desc.h Date: Tue, 20 Aug 2019 18:47:49 +0300 Message-Id: <1566316095-27507-24-git-send-email-kvalo@codeaurora.org> X-Mailer: git-send-email 2.7.4 In-Reply-To: <1566316095-27507-1-git-send-email-kvalo@codeaurora.org> References: <1566316095-27507-1-git-send-email-kvalo@codeaurora.org> Sender: linux-wireless-owner@vger.kernel.org Precedence: bulk List-ID: X-Mailing-List: linux-wireless@vger.kernel.org --- drivers/net/wireless/ath/ath11k/hal_desc.h | 2469 ++++++++++++++++++++++++++++ 1 file changed, 2469 insertions(+) diff --git a/drivers/net/wireless/ath/ath11k/hal_desc.h b/drivers/net/wireless/ath/ath11k/hal_desc.h new file mode 100644 index 000000000000..dbfb82130db6 --- /dev/null +++ b/drivers/net/wireless/ath/ath11k/hal_desc.h @@ -0,0 +1,2469 @@ +/* SPDX-License-Identifier: ISC */ +/* + * Copyright (c) 2018-2019 The Linux Foundation. All rights reserved. + */ +#ifndef ATH11K_HAL_DESC_H +#define ATH11K_HAL_DESC_H + +#define BUFFER_ADDR_INFO0_ADDR GENMASK(31, 0) + +#define BUFFER_ADDR_INFO1_ADDR GENMASK(7, 0) +#define BUFFER_ADDR_INFO1_RET_BUF_MGR GENMASK(10, 8) +#define BUFFER_ADDR_INFO1_SW_COOKIE GENMASK(31, 11) + +struct ath11k_buffer_addr { + u32 info0; + u32 info1; +} __packed; + +/* ath11k_buffer_addr + * + * info0 + * Address (lower 32 bits) of the msdu buffer or msdu extension + * descriptor or Link descriptor + * + * addr + * Address (upper 8 bits) of the msdu buffer or msdu extension + * descriptor or Link descriptor + * + * return_buffer_manager (RBM) + * Consumer: WBM + * Producer: SW/FW + * Indicates to which buffer manager the buffer or MSDU_EXTENSION + * descriptor or link descriptor that is being pointed to shall be + * returned after the frame has been processed. It is used by WBM + * for routing purposes. + * + * Values are defined in enum %HAL_RX_BUF_RBM_ + * + * sw_buffer_cookie + * Cookie field exclusively used by SW. HW ignores the contents, + * accept that it passes the programmed value on to other + * descriptors together with the physical address. + * + * Field can be used by SW to for example associate the buffers + * physical address with the virtual address. + */ + +enum hal_tlv_tag { + HAL_MACTX_CBF_START = 0 /* 0x0 */, + HAL_PHYRX_DATA = 1 /* 0x1 */, + HAL_PHYRX_CBF_DATA_RESP = 2 /* 0x2 */, + HAL_PHYRX_ABORT_REQUEST = 3 /* 0x3 */, + HAL_PHYRX_USER_ABORT_NOTIFICATION = 4 /* 0x4 */, + HAL_MACTX_DATA_RESP = 5 /* 0x5 */, + HAL_MACTX_CBF_DATA = 6 /* 0x6 */, + HAL_MACTX_CBF_DONE = 7 /* 0x7 */, + HAL_MACRX_CBF_READ_REQUEST = 8 /* 0x8 */, + HAL_MACRX_CBF_DATA_REQUEST = 9 /* 0x9 */, + HAL_MACRX_EXPECT_NDP_RECEPTION = 10 /* 0xa */, + HAL_MACRX_FREEZE_CAPTURE_CHANNEL = 11 /* 0xb */, + HAL_MACRX_NDP_TIMEOUT = 12 /* 0xc */, + HAL_MACRX_ABORT_ACK = 13 /* 0xd */, + HAL_MACRX_REQ_IMPLICIT_FB = 14 /* 0xe */, + HAL_MACRX_CHAIN_MASK = 15 /* 0xf */, + HAL_MACRX_NAP_USER = 16 /* 0x10 */, + HAL_MACRX_ABORT_REQUEST = 17 /* 0x11 */, + HAL_PHYTX_OTHER_TRANSMIT_INFO16 = 18 /* 0x12 */, + HAL_PHYTX_ABORT_ACK = 19 /* 0x13 */, + HAL_PHYTX_ABORT_REQUEST = 20 /* 0x14 */, + HAL_PHYTX_PKT_END = 21 /* 0x15 */, + HAL_PHYTX_PPDU_HEADER_INFO_REQUEST = 22 /* 0x16 */, + HAL_PHYTX_REQUEST_CTRL_INFO = 23 /* 0x17 */, + HAL_PHYTX_DATA_REQUEST = 24 /* 0x18 */, + HAL_PHYTX_BF_CV_LOADING_DONE = 25 /* 0x19 */, + HAL_PHYTX_NAP_ACK = 26 /* 0x1a */, + HAL_PHYTX_NAP_DONE = 27 /* 0x1b */, + HAL_PHYTX_OFF_ACK = 28 /* 0x1c */, + HAL_PHYTX_ON_ACK = 29 /* 0x1d */, + HAL_PHYTX_SYNTH_OFF_ACK = 30 /* 0x1e */, + HAL_PHYTX_DEBUG16 = 31 /* 0x1f */, + HAL_MACTX_ABORT_REQUEST = 32 /* 0x20 */, + HAL_MACTX_ABORT_ACK = 33 /* 0x21 */, + HAL_MACTX_PKT_END = 34 /* 0x22 */, + HAL_MACTX_PRE_PHY_DESC = 35 /* 0x23 */, + HAL_MACTX_BF_PARAMS_COMMON = 36 /* 0x24 */, + HAL_MACTX_BF_PARAMS_PER_USER = 37 /* 0x25 */, + HAL_MACTX_PREFETCH_CV = 38 /* 0x26 */, + HAL_MACTX_USER_DESC_COMMON = 39 /* 0x27 */, + HAL_MACTX_USER_DESC_PER_USER = 40 /* 0x28 */, + HAL_EXAMPLE_USER_TLV_16 = 41 /* 0x29 */, + HAL_EXAMPLE_TLV_16 = 42 /* 0x2a */, + HAL_MACTX_PHY_OFF = 43 /* 0x2b */, + HAL_MACTX_PHY_ON = 44 /* 0x2c */, + HAL_MACTX_SYNTH_OFF = 45 /* 0x2d */, + HAL_MACTX_EXPECT_CBF_COMMON = 46 /* 0x2e */, + HAL_MACTX_EXPECT_CBF_PER_USER = 47 /* 0x2f */, + HAL_MACTX_PHY_DESC = 48 /* 0x30 */, + HAL_MACTX_L_SIG_A = 49 /* 0x31 */, + HAL_MACTX_L_SIG_B = 50 /* 0x32 */, + HAL_MACTX_HT_SIG = 51 /* 0x33 */, + HAL_MACTX_VHT_SIG_A = 52 /* 0x34 */, + HAL_MACTX_VHT_SIG_B_SU20 = 53 /* 0x35 */, + HAL_MACTX_VHT_SIG_B_SU40 = 54 /* 0x36 */, + HAL_MACTX_VHT_SIG_B_SU80 = 55 /* 0x37 */, + HAL_MACTX_VHT_SIG_B_SU160 = 56 /* 0x38 */, + HAL_MACTX_VHT_SIG_B_MU20 = 57 /* 0x39 */, + HAL_MACTX_VHT_SIG_B_MU40 = 58 /* 0x3a */, + HAL_MACTX_VHT_SIG_B_MU80 = 59 /* 0x3b */, + HAL_MACTX_VHT_SIG_B_MU160 = 60 /* 0x3c */, + HAL_MACTX_SERVICE = 61 /* 0x3d */, + HAL_MACTX_HE_SIG_A_SU = 62 /* 0x3e */, + HAL_MACTX_HE_SIG_A_MU_DL = 63 /* 0x3f */, + HAL_MACTX_HE_SIG_A_MU_UL = 64 /* 0x40 */, + HAL_MACTX_HE_SIG_B1_MU = 65 /* 0x41 */, + HAL_MACTX_HE_SIG_B2_MU = 66 /* 0x42 */, + HAL_MACTX_HE_SIG_B2_OFDMA = 67 /* 0x43 */, + HAL_MACTX_DELETE_CV = 68 /* 0x44 */, + HAL_MACTX_MU_UPLINK_COMMON = 69 /* 0x45 */, + HAL_MACTX_MU_UPLINK_USER_SETUP = 70 /* 0x46 */, + HAL_MACTX_OTHER_TRANSMIT_INFO = 71 /* 0x47 */, + HAL_MACTX_PHY_NAP = 72 /* 0x48 */, + HAL_MACTX_DEBUG = 73 /* 0x49 */, + HAL_PHYRX_ABORT_ACK = 74 /* 0x4a */, + HAL_PHYRX_GENERATED_CBF_DETAILS = 75 /* 0x4b */, + HAL_PHYRX_RSSI_LEGACY = 76 /* 0x4c */, + HAL_PHYRX_RSSI_HT = 77 /* 0x4d */, + HAL_PHYRX_USER_INFO = 78 /* 0x4e */, + HAL_PHYRX_PKT_END = 79 /* 0x4f */, + HAL_PHYRX_DEBUG = 80 /* 0x50 */, + HAL_PHYRX_CBF_TRANSFER_DONE = 81 /* 0x51 */, + HAL_PHYRX_CBF_TRANSFER_ABORT = 82 /* 0x52 */, + HAL_PHYRX_L_SIG_A = 83 /* 0x53 */, + HAL_PHYRX_L_SIG_B = 84 /* 0x54 */, + HAL_PHYRX_HT_SIG = 85 /* 0x55 */, + HAL_PHYRX_VHT_SIG_A = 86 /* 0x56 */, + HAL_PHYRX_VHT_SIG_B_SU20 = 87 /* 0x57 */, + HAL_PHYRX_VHT_SIG_B_SU40 = 88 /* 0x58 */, + HAL_PHYRX_VHT_SIG_B_SU80 = 89 /* 0x59 */, + HAL_PHYRX_VHT_SIG_B_SU160 = 90 /* 0x5a */, + HAL_PHYRX_VHT_SIG_B_MU20 = 91 /* 0x5b */, + HAL_PHYRX_VHT_SIG_B_MU40 = 92 /* 0x5c */, + HAL_PHYRX_VHT_SIG_B_MU80 = 93 /* 0x5d */, + HAL_PHYRX_VHT_SIG_B_MU160 = 94 /* 0x5e */, + HAL_PHYRX_HE_SIG_A_SU = 95 /* 0x5f */, + HAL_PHYRX_HE_SIG_A_MU_DL = 96 /* 0x60 */, + HAL_PHYRX_HE_SIG_A_MU_UL = 97 /* 0x61 */, + HAL_PHYRX_HE_SIG_B1_MU = 98 /* 0x62 */, + HAL_PHYRX_HE_SIG_B2_MU = 99 /* 0x63 */, + HAL_PHYRX_HE_SIG_B2_OFDMA = 100 /* 0x64 */, + HAL_PHYRX_OTHER_RECEIVE_INFO = 101 /* 0x65 */, + HAL_PHYRX_COMMON_USER_INFO = 102 /* 0x66 */, + HAL_PHYRX_DATA_DONE = 103 /* 0x67 */, + HAL_RECEIVE_RSSI_INFO = 104 /* 0x68 */, + HAL_RECEIVE_USER_INFO = 105 /* 0x69 */, + HAL_MIMO_CONTROL_INFO = 106 /* 0x6a */, + HAL_RX_LOCATION_INFO = 107 /* 0x6b */, + HAL_COEX_TX_REQ = 108 /* 0x6c */, + HAL_DUMMY = 109 /* 0x6d */, + HAL_RX_TIMING_OFFSET_INFO = 110 /* 0x6e */, + HAL_EXAMPLE_TLV_32_NAME = 111 /* 0x6f */, + HAL_MPDU_LIMIT = 112 /* 0x70 */, + HAL_NA_LENGTH_END = 113 /* 0x71 */, + HAL_OLE_BUF_STATUS = 114 /* 0x72 */, + HAL_PCU_PPDU_SETUP_DONE = 115 /* 0x73 */, + HAL_PCU_PPDU_SETUP_END = 116 /* 0x74 */, + HAL_PCU_PPDU_SETUP_INIT = 117 /* 0x75 */, + HAL_PCU_PPDU_SETUP_START = 118 /* 0x76 */, + HAL_PDG_FES_SETUP = 119 /* 0x77 */, + HAL_PDG_RESPONSE = 120 /* 0x78 */, + HAL_PDG_TX_REQ = 121 /* 0x79 */, + HAL_SCH_WAIT_INSTR = 122 /* 0x7a */, + HAL_SCHEDULER_TLV = 123 /* 0x7b */, + HAL_TQM_FLOW_EMPTY_STATUS = 124 /* 0x7c */, + HAL_TQM_FLOW_NOT_EMPTY_STATUS = 125 /* 0x7d */, + HAL_TQM_GEN_MPDU_LENGTH_LIST = 126 /* 0x7e */, + HAL_TQM_GEN_MPDU_LENGTH_LIST_STATUS = 127 /* 0x7f */, + HAL_TQM_GEN_MPDUS = 128 /* 0x80 */, + HAL_TQM_GEN_MPDUS_STATUS = 129 /* 0x81 */, + HAL_TQM_REMOVE_MPDU = 130 /* 0x82 */, + HAL_TQM_REMOVE_MPDU_STATUS = 131 /* 0x83 */, + HAL_TQM_REMOVE_MSDU = 132 /* 0x84 */, + HAL_TQM_REMOVE_MSDU_STATUS = 133 /* 0x85 */, + HAL_TQM_UPDATE_TX_MPDU_COUNT = 134 /* 0x86 */, + HAL_TQM_WRITE_CMD = 135 /* 0x87 */, + HAL_OFDMA_TRIGGER_DETAILS = 136 /* 0x88 */, + HAL_TX_DATA = 137 /* 0x89 */, + HAL_TX_FES_SETUP = 138 /* 0x8a */, + HAL_RX_PACKET = 139 /* 0x8b */, + HAL_EXPECTED_RESPONSE = 140 /* 0x8c */, + HAL_TX_MPDU_END = 141 /* 0x8d */, + HAL_TX_MPDU_START = 142 /* 0x8e */, + HAL_TX_MSDU_END = 143 /* 0x8f */, + HAL_TX_MSDU_START = 144 /* 0x90 */, + HAL_TX_SW_MODE_SETUP = 145 /* 0x91 */, + HAL_TXPCU_BUFFER_STATUS = 146 /* 0x92 */, + HAL_TXPCU_USER_BUFFER_STATUS = 147 /* 0x93 */, + HAL_DATA_TO_TIME_CONFIG = 148 /* 0x94 */, + HAL_EXAMPLE_USER_TLV_32 = 149 /* 0x95 */, + HAL_MPDU_INFO = 150 /* 0x96 */, + HAL_PDG_USER_SETUP = 151 /* 0x97 */, + HAL_TX_11AH_SETUP = 152 /* 0x98 */, + HAL_REO_UPDATE_RX_REO_QUEUE_STATUS = 153 /* 0x99 */, + HAL_TX_PEER_ENTRY = 154 /* 0x9a */, + HAL_TX_RAW_OR_NATIVE_FRAME_SETUP = 155 /* 0x9b */, + HAL_EXAMPLE_STRUCT_NAME = 156 /* 0x9c */, + HAL_PCU_PPDU_SETUP_END_INFO = 157 /* 0x9d */, + HAL_PPDU_RATE_SETTING = 158 /* 0x9e */, + HAL_PROT_RATE_SETTING = 159 /* 0x9f */, + HAL_RX_MPDU_DETAILS = 160 /* 0xa0 */, + HAL_EXAMPLE_USER_TLV_42 = 161 /* 0xa1 */, + HAL_RX_MSDU_LINK = 162 /* 0xa2 */, + HAL_RX_REO_QUEUE = 163 /* 0xa3 */, + HAL_ADDR_SEARCH_ENTRY = 164 /* 0xa4 */, + HAL_SCHEDULER_CMD = 165 /* 0xa5 */, + HAL_TX_FLUSH = 166 /* 0xa6 */, + HAL_TQM_ENTRANCE_RING = 167 /* 0xa7 */, + HAL_TX_DATA_WORD = 168 /* 0xa8 */, + HAL_TX_MPDU_DETAILS = 169 /* 0xa9 */, + HAL_TX_MPDU_LINK = 170 /* 0xaa */, + HAL_TX_MPDU_LINK_PTR = 171 /* 0xab */, + HAL_TX_MPDU_QUEUE_HEAD = 172 /* 0xac */, + HAL_TX_MPDU_QUEUE_EXT = 173 /* 0xad */, + HAL_TX_MPDU_QUEUE_EXT_PTR = 174 /* 0xae */, + HAL_TX_MSDU_DETAILS = 175 /* 0xaf */, + HAL_TX_MSDU_EXTENSION = 176 /* 0xb0 */, + HAL_TX_MSDU_FLOW = 177 /* 0xb1 */, + HAL_TX_MSDU_LINK = 178 /* 0xb2 */, + HAL_TX_MSDU_LINK_ENTRY_PTR = 179 /* 0xb3 */, + HAL_RESPONSE_RATE_SETTING = 180 /* 0xb4 */, + HAL_TXPCU_BUFFER_BASICS = 181 /* 0xb5 */, + HAL_UNIFORM_DESCRIPTOR_HEADER = 182 /* 0xb6 */, + HAL_UNIFORM_TQM_CMD_HEADER = 183 /* 0xb7 */, + HAL_UNIFORM_TQM_STATUS_HEADER = 184 /* 0xb8 */, + HAL_USER_RATE_SETTING = 185 /* 0xb9 */, + HAL_WBM_BUFFER_RING = 186 /* 0xba */, + HAL_WBM_LINK_DESCRIPTOR_RING = 187 /* 0xbb */, + HAL_WBM_RELEASE_RING = 188 /* 0xbc */, + HAL_TX_FLUSH_REQ = 189 /* 0xbd */, + HAL_RX_MSDU_DETAILS = 190 /* 0xbe */, + HAL_TQM_WRITE_CMD_STATUS = 191 /* 0xbf */, + HAL_TQM_GET_MPDU_QUEUE_STATS = 192 /* 0xc0 */, + HAL_TQM_GET_MSDU_FLOW_STATS = 193 /* 0xc1 */, + HAL_EXAMPLE_USER_CTLV_32 = 194 /* 0xc2 */, + HAL_TX_FES_STATUS_START = 195 /* 0xc3 */, + HAL_TX_FES_STATUS_USER_PPDU = 196 /* 0xc4 */, + HAL_TX_FES_STATUS_USER_RESPONSE = 197 /* 0xc5 */, + HAL_TX_FES_STATUS_END = 198 /* 0xc6 */, + HAL_RX_TRIG_INFO = 199 /* 0xc7 */, + HAL_RXPCU_TX_SETUP_CLEAR = 200 /* 0xc8 */, + HAL_RX_FRAME_BITMAP_REQ = 201 /* 0xc9 */, + HAL_RX_FRAME_BITMAP_ACK = 202 /* 0xca */, + HAL_COEX_RX_STATUS = 203 /* 0xcb */, + HAL_RX_START_PARAM = 204 /* 0xcc */, + HAL_RX_PPDU_START = 205 /* 0xcd */, + HAL_RX_PPDU_END = 206 /* 0xce */, + HAL_RX_MPDU_START = 207 /* 0xcf */, + HAL_RX_MPDU_END = 208 /* 0xd0 */, + HAL_RX_MSDU_START = 209 /* 0xd1 */, + HAL_RX_MSDU_END = 210 /* 0xd2 */, + HAL_RX_ATTENTION = 211 /* 0xd3 */, + HAL_RECEIVED_RESPONSE_INFO = 212 /* 0xd4 */, + HAL_RX_PHY_SLEEP = 213 /* 0xd5 */, + HAL_RX_HEADER = 214 /* 0xd6 */, + HAL_RX_PEER_ENTRY = 215 /* 0xd7 */, + HAL_RX_FLUSH = 216 /* 0xd8 */, + HAL_RX_RESPONSE_REQUIRED_INFO = 217 /* 0xd9 */, + HAL_RX_FRAMELESS_BAR_DETAILS = 218 /* 0xda */, + HAL_TQM_GET_MPDU_QUEUE_STATS_STATUS = 219 /* 0xdb */, + HAL_TQM_GET_MSDU_FLOW_STATS_STATUS = 220 /* 0xdc */, + HAL_TX_CBF_INFO = 221 /* 0xdd */, + HAL_PCU_PPDU_SETUP_USER = 222 /* 0xde */, + HAL_RX_MPDU_PCU_START = 223 /* 0xdf */, + HAL_RX_PM_INFO = 224 /* 0xe0 */, + HAL_RX_USER_PPDU_END = 225 /* 0xe1 */, + HAL_RX_PRE_PPDU_START = 226 /* 0xe2 */, + HAL_RX_PREAMBLE = 227 /* 0xe3 */, + HAL_TX_FES_SETUP_COMPLETE = 228 /* 0xe4 */, + HAL_TX_LAST_MPDU_FETCHED = 229 /* 0xe5 */, + HAL_TXDMA_STOP_REQUEST = 230 /* 0xe6 */, + HAL_RXPCU_SETUP = 231 /* 0xe7 */, + HAL_RXPCU_USER_SETUP = 232 /* 0xe8 */, + HAL_TX_FES_STATUS_ACK_OR_BA = 233 /* 0xe9 */, + HAL_TQM_ACKED_MPDU = 234 /* 0xea */, + HAL_COEX_TX_RESP = 235 /* 0xeb */, + HAL_COEX_TX_STATUS = 236 /* 0xec */, + HAL_MACTX_COEX_PHY_CTRL = 237 /* 0xed */, + HAL_COEX_STATUS_BROADCAST = 238 /* 0xee */, + HAL_RESPONSE_START_STATUS = 239 /* 0xef */, + HAL_RESPONSE_END_STATUS = 240 /* 0xf0 */, + HAL_CRYPTO_STATUS = 241 /* 0xf1 */, + HAL_RECEIVED_TRIGGER_INFO = 242 /* 0xf2 */, + HAL_REO_ENTRANCE_RING = 243 /* 0xf3 */, + HAL_RX_MPDU_LINK = 244 /* 0xf4 */, + HAL_COEX_TX_STOP_CTRL = 245 /* 0xf5 */, + HAL_RX_PPDU_ACK_REPORT = 246 /* 0xf6 */, + HAL_RX_PPDU_NO_ACK_REPORT = 247 /* 0xf7 */, + HAL_SCH_COEX_STATUS = 248 /* 0xf8 */, + HAL_SCHEDULER_COMMAND_STATUS = 249 /* 0xf9 */, + HAL_SCHEDULER_RX_PPDU_NO_RESPONSE_STATUS = 250 /* 0xfa */, + HAL_TX_FES_STATUS_PROT = 251 /* 0xfb */, + HAL_TX_FES_STATUS_START_PPDU = 252 /* 0xfc */, + HAL_TX_FES_STATUS_START_PROT = 253 /* 0xfd */, + HAL_TXPCU_PHYTX_DEBUG32 = 254 /* 0xfe */, + HAL_TXPCU_PHYTX_OTHER_TRANSMIT_INFO32 = 255 /* 0xff */, + HAL_TX_MPDU_COUNT_TRANSFER_END = 256 /* 0x100 */, + HAL_WHO_ANCHOR_OFFSET = 257 /* 0x101 */, + HAL_WHO_ANCHOR_VALUE = 258 /* 0x102 */, + HAL_WHO_CCE_INFO = 259 /* 0x103 */, + HAL_WHO_COMMIT = 260 /* 0x104 */, + HAL_WHO_COMMIT_DONE = 261 /* 0x105 */, + HAL_WHO_FLUSH = 262 /* 0x106 */, + HAL_WHO_L2_LLC = 263 /* 0x107 */, + HAL_WHO_L2_PAYLOAD = 264 /* 0x108 */, + HAL_WHO_L3_CHECKSUM = 265 /* 0x109 */, + HAL_WHO_L3_INFO = 266 /* 0x10a */, + HAL_WHO_L4_CHECKSUM = 267 /* 0x10b */, + HAL_WHO_L4_INFO = 268 /* 0x10c */, + HAL_WHO_MSDU = 269 /* 0x10d */, + HAL_WHO_MSDU_MISC = 270 /* 0x10e */, + HAL_WHO_PACKET_DATA = 271 /* 0x10f */, + HAL_WHO_PACKET_HDR = 272 /* 0x110 */, + HAL_WHO_PPDU_END = 273 /* 0x111 */, + HAL_WHO_PPDU_START = 274 /* 0x112 */, + HAL_WHO_TSO = 275 /* 0x113 */, + HAL_WHO_WMAC_HEADER_PV0 = 276 /* 0x114 */, + HAL_WHO_WMAC_HEADER_PV1 = 277 /* 0x115 */, + HAL_WHO_WMAC_IV = 278 /* 0x116 */, + HAL_MPDU_INFO_END = 279 /* 0x117 */, + HAL_MPDU_INFO_BITMAP = 280 /* 0x118 */, + HAL_TX_QUEUE_EXTENSION = 281 /* 0x119 */, + HAL_RX_PEER_ENTRY_DETAILS = 282 /* 0x11a */, + HAL_RX_REO_QUEUE_REFERENCE = 283 /* 0x11b */, + HAL_RX_REO_QUEUE_EXT = 284 /* 0x11c */, + HAL_SCHEDULER_SELFGEN_RESPONSE_STATUS = 285 /* 0x11d */, + HAL_TQM_UPDATE_TX_MPDU_COUNT_STATUS = 286 /* 0x11e */, + HAL_TQM_ACKED_MPDU_STATUS = 287 /* 0x11f */, + HAL_TQM_ADD_MSDU_STATUS = 288 /* 0x120 */, + HAL_RX_MPDU_LINK_PTR = 289 /* 0x121 */, + HAL_REO_DESTINATION_RING = 290 /* 0x122 */, + HAL_TQM_LIST_GEN_DONE = 291 /* 0x123 */, + HAL_WHO_TERMINATE = 292 /* 0x124 */, + HAL_TX_LAST_MPDU_END = 293 /* 0x125 */, + HAL_TX_CV_DATA = 294 /* 0x126 */, + HAL_TCL_ENTRANCE_FROM_PPE_RING = 295 /* 0x127 */, + HAL_PPDU_TX_END = 296 /* 0x128 */, + HAL_PROT_TX_END = 297 /* 0x129 */, + HAL_PDG_RESPONSE_RATE_SETTING = 298 /* 0x12a */, + HAL_MPDU_INFO_GLOBAL_END = 299 /* 0x12b */, + HAL_TQM_SCH_INSTR_GLOBAL_END = 300 /* 0x12c */, + HAL_RX_PPDU_END_USER_STATS = 301 /* 0x12d */, + HAL_RX_PPDU_END_USER_STATS_EXT = 302 /* 0x12e */, + HAL_NO_ACK_REPORT = 303 /* 0x12f */, + HAL_ACK_REPORT = 304 /* 0x130 */, + HAL_UNIFORM_REO_CMD_HEADER = 305 /* 0x131 */, + HAL_REO_GET_QUEUE_STATS = 306 /* 0x132 */, + HAL_REO_FLUSH_QUEUE = 307 /* 0x133 */, + HAL_REO_FLUSH_CACHE = 308 /* 0x134 */, + HAL_REO_UNBLOCK_CACHE = 309 /* 0x135 */, + HAL_UNIFORM_REO_STATUS_HEADER = 310 /* 0x136 */, + HAL_REO_GET_QUEUE_STATS_STATUS = 311 /* 0x137 */, + HAL_REO_FLUSH_QUEUE_STATUS = 312 /* 0x138 */, + HAL_REO_FLUSH_CACHE_STATUS = 313 /* 0x139 */, + HAL_REO_UNBLOCK_CACHE_STATUS = 314 /* 0x13a */, + HAL_TQM_FLUSH_CACHE = 315 /* 0x13b */, + HAL_TQM_UNBLOCK_CACHE = 316 /* 0x13c */, + HAL_TQM_FLUSH_CACHE_STATUS = 317 /* 0x13d */, + HAL_TQM_UNBLOCK_CACHE_STATUS = 318 /* 0x13e */, + HAL_RX_PPDU_END_STATUS_DONE = 319 /* 0x13f */, + HAL_RX_STATUS_BUFFER_DONE = 320 /* 0x140 */, + HAL_BUFFER_ADDR_INFO = 321 /* 0x141 */, + HAL_RX_MSDU_DESC_INFO = 322 /* 0x142 */, + HAL_RX_MPDU_DESC_INFO = 323 /* 0x143 */, + HAL_TCL_DATA_CMD = 324 /* 0x144 */, + HAL_TCL_GSE_CMD = 325 /* 0x145 */, + HAL_TCL_EXIT_BASE = 326 /* 0x146 */, + HAL_TCL_COMPACT_EXIT_RING = 327 /* 0x147 */, + HAL_TCL_REGULAR_EXIT_RING = 328 /* 0x148 */, + HAL_TCL_EXTENDED_EXIT_RING = 329 /* 0x149 */, + HAL_UPLINK_COMMON_INFO = 330 /* 0x14a */, + HAL_UPLINK_USER_SETUP_INFO = 331 /* 0x14b */, + HAL_TX_DATA_SYNC = 332 /* 0x14c */, + HAL_PHYRX_CBF_READ_REQUEST_ACK = 333 /* 0x14d */, + HAL_TCL_STATUS_RING = 334 /* 0x14e */, + HAL_TQM_GET_MPDU_HEAD_INFO = 335 /* 0x14f */, + HAL_TQM_SYNC_CMD = 336 /* 0x150 */, + HAL_TQM_GET_MPDU_HEAD_INFO_STATUS = 337 /* 0x151 */, + HAL_TQM_SYNC_CMD_STATUS = 338 /* 0x152 */, + HAL_TQM_THRESHOLD_DROP_NOTIFICATION_STATUS = 339 /* 0x153 */, + HAL_TQM_DESCRIPTOR_THRESHOLD_REACHED_STATUS = 340 /* 0x154 */, + HAL_REO_FLUSH_TIMEOUT_LIST = 341 /* 0x155 */, + HAL_REO_FLUSH_TIMEOUT_LIST_STATUS = 342 /* 0x156 */, + HAL_REO_TO_PPE_RING = 343 /* 0x157 */, + HAL_RX_MPDU_INFO = 344 /* 0x158 */, + HAL_REO_DESCRIPTOR_THRESHOLD_REACHED_STATUS = 345 /* 0x159 */, + HAL_SCHEDULER_RX_SIFS_RESPONSE_TRIGGER_STATUS = 346 /* 0x15a */, + HAL_EXAMPLE_USER_TLV_32_NAME = 347 /* 0x15b */, + HAL_RX_PPDU_START_USER_INFO = 348 /* 0x15c */, + HAL_RX_RXPCU_CLASSIFICATION_OVERVIEW = 349 /* 0x15d */, + HAL_RX_RING_MASK = 350 /* 0x15e */, + HAL_WHO_CLASSIFY_INFO = 351 /* 0x15f */, + HAL_TXPT_CLASSIFY_INFO = 352 /* 0x160 */, + HAL_RXPT_CLASSIFY_INFO = 353 /* 0x161 */, + HAL_TX_FLOW_SEARCH_ENTRY = 354 /* 0x162 */, + HAL_RX_FLOW_SEARCH_ENTRY = 355 /* 0x163 */, + HAL_RECEIVED_TRIGGER_INFO_DETAILS = 356 /* 0x164 */, + HAL_COEX_MAC_NAP = 357 /* 0x165 */, + HAL_MACRX_ABORT_REQUEST_INFO = 358 /* 0x166 */, + HAL_MACTX_ABORT_REQUEST_INFO = 359 /* 0x167 */, + HAL_PHYRX_ABORT_REQUEST_INFO = 360 /* 0x168 */, + HAL_PHYTX_ABORT_REQUEST_INFO = 361 /* 0x169 */, + HAL_RXPCU_PPDU_END_INFO = 362 /* 0x16a */, + HAL_WHO_MESH_CONTROL = 363 /* 0x16b */, + HAL_L_SIG_A_INFO = 364 /* 0x16c */, + HAL_L_SIG_B_INFO = 365 /* 0x16d */, + HAL_HT_SIG_INFO = 366 /* 0x16e */, + HAL_VHT_SIG_A_INFO = 367 /* 0x16f */, + HAL_VHT_SIG_B_SU20_INFO = 368 /* 0x170 */, + HAL_VHT_SIG_B_SU40_INFO = 369 /* 0x171 */, + HAL_VHT_SIG_B_SU80_INFO = 370 /* 0x172 */, + HAL_VHT_SIG_B_SU160_INFO = 371 /* 0x173 */, + HAL_VHT_SIG_B_MU20_INFO = 372 /* 0x174 */, + HAL_VHT_SIG_B_MU40_INFO = 373 /* 0x175 */, + HAL_VHT_SIG_B_MU80_INFO = 374 /* 0x176 */, + HAL_VHT_SIG_B_MU160_INFO = 375 /* 0x177 */, + HAL_SERVICE_INFO = 376 /* 0x178 */, + HAL_HE_SIG_A_SU_INFO = 377 /* 0x179 */, + HAL_HE_SIG_A_MU_DL_INFO = 378 /* 0x17a */, + HAL_HE_SIG_A_MU_UL_INFO = 379 /* 0x17b */, + HAL_HE_SIG_B1_MU_INFO = 380 /* 0x17c */, + HAL_HE_SIG_B2_MU_INFO = 381 /* 0x17d */, + HAL_HE_SIG_B2_OFDMA_INFO = 382 /* 0x17e */, + HAL_PDG_SW_MODE_BW_START = 383 /* 0x17f */, + HAL_PDG_SW_MODE_BW_END = 384 /* 0x180 */, + HAL_PDG_WAIT_FOR_MAC_REQUEST = 385 /* 0x181 */, + HAL_PDG_WAIT_FOR_PHY_REQUEST = 386 /* 0x182 */, + HAL_SCHEDULER_END = 387 /* 0x183 */, + HAL_PEER_TABLE_ENTRY = 388 /* 0x184 */, + HAL_SW_PEER_INFO = 389 /* 0x185 */, + HAL_RXOLE_CCE_CLASSIFY_INFO = 390 /* 0x186 */, + HAL_TCL_CCE_CLASSIFY_INFO = 391 /* 0x187 */, + HAL_RXOLE_CCE_INFO = 392 /* 0x188 */, + HAL_TCL_CCE_INFO = 393 /* 0x189 */, + HAL_TCL_CCE_SUPERRULE = 394 /* 0x18a */, + HAL_CCE_RULE = 395 /* 0x18b */, + HAL_RX_PPDU_START_DROPPED = 396 /* 0x18c */, + HAL_RX_PPDU_END_DROPPED = 397 /* 0x18d */, + HAL_RX_PPDU_END_STATUS_DONE_DROPPED = 398 /* 0x18e */, + HAL_RX_MPDU_START_DROPPED = 399 /* 0x18f */, + HAL_RX_MSDU_START_DROPPED = 400 /* 0x190 */, + HAL_RX_MSDU_END_DROPPED = 401 /* 0x191 */, + HAL_RX_MPDU_END_DROPPED = 402 /* 0x192 */, + HAL_RX_ATTENTION_DROPPED = 403 /* 0x193 */, + HAL_TXPCU_USER_SETUP = 404 /* 0x194 */, + HAL_RXPCU_USER_SETUP_EXT = 405 /* 0x195 */, + HAL_CE_SRC_DESC = 406 /* 0x196 */, + HAL_CE_STAT_DESC = 407 /* 0x197 */, + HAL_RXOLE_CCE_SUPERRULE = 408 /* 0x198 */, + HAL_TX_RATE_STATS_INFO = 409 /* 0x199 */, + HAL_CMD_PART_0_END = 410 /* 0x19a */, + HAL_MACTX_SYNTH_ON = 411 /* 0x19b */, + HAL_SCH_CRITICAL_TLV_REFERENCE = 412 /* 0x19c */, + HAL_TQM_MPDU_GLOBAL_START = 413 /* 0x19d */, + HAL_EXAMPLE_TLV_32 = 414 /* 0x19e */, + HAL_TQM_UPDATE_TX_MSDU_FLOW = 415 /* 0x19f */, + HAL_TQM_UPDATE_TX_MPDU_QUEUE_HEAD = 416 /* 0x1a0 */, + HAL_TQM_UPDATE_TX_MSDU_FLOW_STATUS = 417 /* 0x1a1 */, + HAL_TQM_UPDATE_TX_MPDU_QUEUE_HEAD_STATUS = 418 /* 0x1a2 */, + HAL_REO_UPDATE_RX_REO_QUEUE = 419 /* 0x1a3 */, + HAL_CE_DST_DESC = 420 /* 0x1a4 */, + HAL_TLV_BASE = 511 /* 0x1ff */, +}; + +#define HAL_TLV_HDR_TAG GENMASK(9, 1) +#define HAL_TLV_HDR_LEN GENMASK(25, 10) + +#define HAL_TLV_ALIGN 4 + +struct hal_tlv_hdr { + u32 tl; + u8 value[0]; +} __packed; + +#define RX_MPDU_DESC_INFO0_MSDU_COUNT GENMASK(7, 0) +#define RX_MPDU_DESC_INFO0_SEQ_NUM GENMASK(19, 8) +#define RX_MPDU_DESC_INFO0_FRAG_FLAG BIT(20) +#define RX_MPDU_DESC_INFO0_MPDU_RETRY BIT(21) +#define RX_MPDU_DESC_INFO0_AMPDU_FLAG BIT(22) +#define RX_MPDU_DESC_INFO0_BAR_FRAME BIT(23) +#define RX_MPDU_DESC_INFO0_VALID_PN BIT(24) +#define RX_MPDU_DESC_INFO0_VALID_SA BIT(25) +#define RX_MPDU_DESC_INFO0_SA_IDX_TIMEOUT BIT(26) +#define RX_MPDU_DESC_INFO0_VALID_DA BIT(27) +#define RX_MPDU_DESC_INFO0_DA_MCBC BIT(28) +#define RX_MPDU_DESC_INFO0_DA_IDX_TIMEOUT BIT(29) +#define RX_MPDU_DESC_INFO0_RAW_MPDU BIT(30) + +struct rx_mpdu_desc { + u32 info0; /* %RX_MPDU_DESC_INFO */ + u32 meta_data; +} __packed; + +/* rx_mpdu_desc + * Producer: RXDMA + * Consumer: REO/SW/FW + * + * msdu_count + * The number of MSDUs within the MPDU + * + * mpdu_sequence_number + * The field can have two different meanings based on the setting + * of field 'bar_frame'. If 'bar_frame' is set, it means the MPDU + * start sequence number from the BAR frame otherwise it means + * the MPDU sequence number of the received frame. + * + * fragment_flag + * When set, this MPDU is a fragment and REO should forward this + * fragment MPDU to the REO destination ring without any reorder + * checks, pn checks or bitmap update. This implies that REO is + * forwarding the pointer to the MSDU link descriptor. + * + * mpdu_retry_bit + * The retry bit setting from the MPDU header of the received frame + * + * ampdu_flag + * Indicates the MPDU was received as part of an A-MPDU. + * + * bar_frame + * Indicates the received frame is a BAR frame. After processing, + * this frame shall be pushed to SW or deleted. + * + * valid_pn + * When not set, REO will not perform a PN sequence number check. + * + * valid_sa + * Indicates OLE found a valid SA entry for all MSDUs in this MPDU. + * + * sa_idx_timeout + * Indicates, at least 1 MSDU within the MPDU has an unsuccessful + * MAC source address search due to the expiration of search timer. + * + * valid_da + * When set, OLE found a valid DA entry for all MSDUs in this MPDU. + * + * da_mcbc + * Field Only valid if valid_da is set. Indicates at least one of + * the DA addresses is a Multicast or Broadcast address. + * + * da_idx_timeout + * Indicates, at least 1 MSDU within the MPDU has an unsuccessful + * MAC destination address search due to the expiration of search + * timer. + * + * raw_mpdu + * Field only valid when first_msdu_in_mpdu_flag is set. Indicates + * the contents in the MSDU buffer contains a 'RAW' MPDU. + */ + +enum hal_rx_msdu_desc_reo_dest_ind { + HAL_RX_MSDU_DESC_REO_DEST_IND_TCL, + HAL_RX_MSDU_DESC_REO_DEST_IND_SW1, + HAL_RX_MSDU_DESC_REO_DEST_IND_SW2, + HAL_RX_MSDU_DESC_REO_DEST_IND_SW3, + HAL_RX_MSDU_DESC_REO_DEST_IND_SW4, + HAL_RX_MSDU_DESC_REO_DEST_IND_RELEASE, + HAL_RX_MSDU_DESC_REO_DEST_IND_FW, +}; + +#define RX_MSDU_DESC_INFO0_FIRST_MSDU_IN_MPDU BIT(0) +#define RX_MSDU_DESC_INFO0_LAST_MSDU_IN_MPDU BIT(1) +#define RX_MSDU_DESC_INFO0_MSDU_CONTINUATION BIT(2) +#define RX_MSDU_DESC_INFO0_MSDU_LENGTH GENMASK(16, 3) +#define RX_MSDU_DESC_INFO0_REO_DEST_IND GENMASK(21, 17) +#define RX_MSDU_DESC_INFO0_MSDU_DROP BIT(22) +#define RX_MSDU_DESC_INFO0_VALID_SA BIT(23) +#define RX_MSDU_DESC_INFO0_SA_IDX_TIMEOUT BIT(24) +#define RX_MSDU_DESC_INFO0_VALID_DA BIT(25) +#define RX_MSDU_DESC_INFO0_DA_MCBC BIT(26) +#define RX_MSDU_DESC_INFO0_DA_IDX_TIMEOUT BIT(27) + +#define HAL_RX_MSDU_PKT_LENGTH_GET(val) \ + (FIELD_GET(RX_MSDU_DESC_INFO0_MSDU_LENGTH, (val))) + +struct rx_msdu_desc { + u32 info0; + u32 rsvd0; +} __packed; + +/* rx_msdu_desc + * + * first_msdu_in_mpdu + * Indicates first msdu in mpdu. + * + * last_msdu_in_mpdu + * Indicates last msdu in mpdu. This flag can be true only when + * 'Msdu_continuation' set to 0. This implies that when an msdu + * is spread out over multiple buffers and thus msdu_continuation + * is set, only for the very last buffer of the msdu, can the + * 'last_msdu_in_mpdu' be set. + * + * When both first_msdu_in_mpdu and last_msdu_in_mpdu are set, + * the MPDU that this MSDU belongs to only contains a single MSDU. + * + * msdu_continuation + * When set, this MSDU buffer was not able to hold the entire MSDU. + * The next buffer will therefor contain additional information + * related to this MSDU. + * + * msdu_length + * Field is only valid in combination with the 'first_msdu_in_mpdu' + * being set. Full MSDU length in bytes after decapsulation. This + * field is still valid for MPDU frames without A-MSDU. It still + * represents MSDU length after decapsulation Or in case of RAW + * MPDUs, it indicates the length of the entire MPDU (without FCS + * field). + * + * reo_destination_indication + * The id of the reo exit ring where the msdu frame shall push + * after (MPDU level) reordering has finished. Values are defined + * in enum %HAL_RX_MSDU_DESC_REO_DEST_IND_. + * + * msdu_drop + * Indicates that REO shall drop this MSDU and not forward it to + * any other ring. + * + * valid_sa + * Indicates OLE found a valid SA entry for this MSDU. + * + * sa_idx_timeout + * Indicates, an unsuccessful MAC source address search due to + * the expiration of search timer for this MSDU. + * + * valid_da + * When set, OLE found a valid DA entry for this MSDU. + * + * da_mcbc + * Field Only valid if valid_da is set. Indicates the DA address + * is a Multicast or Broadcast address for this MSDU. + * + * da_idx_timeout + * Indicates, an unsuccessful MAC destination address search due + * to the expiration of search timer fot this MSDU. + */ + +enum hal_reo_dest_ring_buffer_type { + HAL_REO_DEST_RING_BUFFER_TYPE_MSDU, + HAL_REO_DEST_RING_BUFFER_TYPE_LINK_DESC, +}; + +enum hal_reo_dest_ring_push_reason { + HAL_REO_DEST_RING_PUSH_REASON_ERR_DETECTED, + HAL_REO_DEST_RING_PUSH_REASON_ROUTING_INSTRUCTION, +}; + +enum hal_reo_dest_ring_error_code { + HAL_REO_DEST_RING_ERROR_CODE_DESC_ADDR_ZERO, + HAL_REO_DEST_RING_ERROR_CODE_DESC_INVALID, + HAL_REO_DEST_RING_ERROR_CODE_AMPDU_IN_NON_BA, + HAL_REO_DEST_RING_ERROR_CODE_NON_BA_DUPLICATE, + HAL_REO_DEST_RING_ERROR_CODE_BA_DUPLICATE, + HAL_REO_DEST_RING_ERROR_CODE_FRAME_2K_JUMP, + HAL_REO_DEST_RING_ERROR_CODE_BAR_2K_JUMP, + HAL_REO_DEST_RING_ERROR_CODE_FRAME_OOR, + HAL_REO_DEST_RING_ERROR_CODE_BAR_OOR, + HAL_REO_DEST_RING_ERROR_CODE_NO_BA_SESSION, + HAL_REO_DEST_RING_ERROR_CODE_FRAME_SN_EQUALS_SSN, + HAL_REO_DEST_RING_ERROR_CODE_PN_CHECK_FAILED, + HAL_REO_DEST_RING_ERROR_CODE_2K_ERR_FLAG_SET, + HAL_REO_DEST_RING_ERROR_CODE_PN_ERR_FLAG_SET, + HAL_REO_DEST_RING_ERROR_CODE_DESC_BLOCKED, + HAL_REO_DEST_RING_ERROR_CODE_MAX, +}; + +#define HAL_REO_DEST_RING_INFO0_QUEUE_ADDR_HI GENMASK(7, 0) +#define HAL_REO_DEST_RING_INFO0_BUFFER_TYPE BIT(8) +#define HAL_REO_DEST_RING_INFO0_PUSH_REASON GENMASK(10, 9) +#define HAL_REO_DEST_RING_INFO0_ERROR_CODE GENMASK(15, 11) +#define HAL_REO_DEST_RING_INFO0_RX_QUEUE_NUM GENMASK(31, 16) + +#define HAL_REO_DEST_RING_INFO1_REORDER_INFO_VALID BIT(0) +#define HAL_REO_DEST_RING_INFO1_REORDER_OPCODE GENMASK(4, 1) +#define HAL_REO_DEST_RING_INFO1_REORDER_SLOT_IDX GENMASK(12, 5) + +#define HAL_REO_DEST_RING_INFO2_RING_ID GENMASK(27, 20) +#define HAL_REO_DEST_RING_INFO2_LOOPING_COUNT GENMASK(31, 28) + +struct hal_reo_dest_ring { + struct ath11k_buffer_addr buf_addr_info; + struct rx_mpdu_desc rx_mpdu_info; + struct rx_msdu_desc rx_msdu_info; + u32 queue_addr_lo; + u32 info0; /* %HAL_REO_DEST_RING_INFO0_ */ + u32 info1; /* %HAL_REO_DEST_RING_INFO1_ */ + u32 rsvd0; + u32 rsvd1; + u32 rsvd2; + u32 rsvd3; + u32 rsvd4; + u32 rsvd5; + u32 info2; /* %HAL_REO_DEST_RING_INFO2_ */ +} __packed; + +/* hal_reo_dest_ring + * + * Producer: RXDMA + * Consumer: REO/SW/FW + * + * buf_addr_info + * Details of the physical address of a buffer or MSDU + * link descriptor. + * + * rx_mpdu_info + * General information related to the MPDU that is passed + * on from REO entrance ring to the REO destination ring. + * + * rx_msdu_info + * General information related to the MSDU that is passed + * on from RXDMA all the way to to the REO destination ring. + * + * queue_addr_lo + * Address (lower 32 bits) of the REO queue descriptor. + * + * queue_addr_hi + * Address (upper 8 bits) of the REO queue descriptor. + * + * buffer_type + * Indicates the type of address provided in the buf_addr_info. + * Values are defined in enum %HAL_REO_DEST_RING_BUFFER_TYPE_. + * + * push_reason + * Reason for pushing this frame to this exit ring. Values are + * defined in enum %HAL_REO_DEST_RING_PUSH_REASON_. + * + * error_code + * Valid only when 'push_reason' is set. All error codes are + * defined in enum %HAL_REO_DEST_RING_ERROR_CODE_. + * + * rx_queue_num + * Indicates the REO MPDU reorder queue id from which this frame + * originated. + * + * reorder_info_valid + * When set, REO has been instructed to not perform the actual + * re-ordering of frames for this queue, but just to insert + * the reorder opcodes. + * + * reorder_opcode + * Field is valid when 'reorder_info_valid' is set. This field is + * always valid for debug purpose as well. + * + * reorder_slot_idx + * Valid only when 'reorder_info_valid' is set. + * + * ring_id + * The buffer pointer ring id. + * 0 - Idle ring + * 1 - N refers to other rings. + * + * looping_count + * Indicates the number of times the producer of entries into + * this ring has looped around the ring. + */ + +enum hal_reo_entr_rxdma_ecode { + HAL_REO_ENTR_RING_RXDMA_ECODE_OVERFLOW_ERR, + HAL_REO_ENTR_RING_RXDMA_ECODE_MPDU_LEN_ERR, + HAL_REO_ENTR_RING_RXDMA_ECODE_FCS_ERR, + HAL_REO_ENTR_RING_RXDMA_ECODE_DECRYPT_ERR, + HAL_REO_ENTR_RING_RXDMA_ECODE_TKIP_MIC_ERR, + HAL_REO_ENTR_RING_RXDMA_ECODE_UNECRYPTED_ERR, + HAL_REO_ENTR_RING_RXDMA_ECODE_MSDU_LEN_ERR, + HAL_REO_ENTR_RING_RXDMA_ECODE_MSDU_LIMIT_ERR, + HAL_REO_ENTR_RING_RXDMA_ECODE_WIFI_PARSE_ERR, + HAL_REO_ENTR_RING_RXDMA_ECODE_AMSDU_PARSE_ERR, + HAL_REO_ENTR_RING_RXDMA_ECODE_SA_TIMEOUT_ERR, + HAL_REO_ENTR_RING_RXDMA_ECODE_DA_TIMEOUT_ERR, + HAL_REO_ENTR_RING_RXDMA_ECODE_FLOW_TIMEOUT_ERR, + HAL_REO_ENTR_RING_RXDMA_ECODE_FLUSH_REQUEST_ERR, + HAL_REO_ENTR_RING_RXDMA_ECODE_MAX, +}; + +#define HAL_REO_ENTR_RING_INFO0_QUEUE_ADDR_HI GENMASK(7, 0) +#define HAL_REO_ENTR_RING_INFO0_MPDU_BYTE_COUNT GENMASK(21, 8) +#define HAL_REO_ENTR_RING_INFO0_DEST_IND GENMASK(26, 22) +#define HAL_REO_ENTR_RING_INFO0_FRAMELESS_BAR BIT(27) + +#define HAL_REO_ENTR_RING_INFO1_RXDMA_PUSH_REASON GENMASK(1, 0) +#define HAL_REO_ENTR_RING_INFO1_RXDMA_ERROR_CODE GENMASK(6, 2) + +struct hal_reo_entrance_ring { + struct ath11k_buffer_addr buf_addr_info; + struct rx_mpdu_desc rx_mpdu_info; + u32 queue_addr_lo; + u32 info0; /* %HAL_REO_ENTR_RING_INFO0_ */ + u32 info1; /* %HAL_REO_ENTR_RING_INFO1_ */ + u32 info2; /* %HAL_REO_DEST_RING_INFO2_ */ + +} __packed; + +/* hal_reo_entrance_ring + * + * Producer: RXDMA + * Consumer: REO + * + * buf_addr_info + * Details of the physical address of a buffer or MSDU + * link descriptor. + * + * rx_mpdu_info + * General information related to the MPDU that is passed + * on from REO entrance ring to the REO destination ring. + * + * queue_addr_lo + * Address (lower 32 bits) of the REO queue descriptor. + * + * queue_addr_hi + * Address (upper 8 bits) of the REO queue descriptor. + * + * mpdu_byte_count + * An approximation of the number of bytes received in this MPDU. + * Used to keeps stats on the amount of data flowing + * through a queue. + * + * reo_destination_indication + * The id of the reo exit ring where the msdu frame shall push + * after (MPDU level) reordering has finished. Values are defined + * in enum %HAL_RX_MSDU_DESC_REO_DEST_IND_. + * + * frameless_bar + * Indicates that this REO entrance ring struct contains BAR info + * from a multi TID BAR frame. The original multi TID BAR frame + * itself contained all the REO info for the first TID, but all + * the subsequent TID info and their linkage to the REO descriptors + * is passed down as 'frameless' BAR info. + * + * The only fields valid in this descriptor when this bit is set + * are queue_addr_lo, queue_addr_hi, mpdu_sequence_number, + * bar_frame and peer_meta_data. + * + * rxdma_push_reason + * Reason for pushing this frame to this exit ring. Values are + * defined in enum %HAL_REO_DEST_RING_PUSH_REASON_. + * + * rxdma_error_code + * Valid only when 'push_reason' is set. All error codes are + * defined in enum %HAL_REO_ENTR_RING_RXDMA_ECODE_. + * + * ring_id + * The buffer pointer ring id. + * 0 - Idle ring + * 1 - N refers to other rings. + * + * looping_count + * Indicates the number of times the producer of entries into + * this ring has looped around the ring. + */ + +#define HAL_REO_CMD_HDR_INFO0_CMD_NUMBER GENMASK(15, 0) +#define HAL_REO_CMD_HDR_INFO0_STATUS_REQUIRED BIT(16) + +struct hal_reo_cmd_hdr { + u32 info0; +} __packed; + +#define HAL_REO_GET_QUEUE_STATS_INFO0_QUEUE_ADDR_HI GENMASK(7, 0) +#define HAL_REO_GET_QUEUE_STATS_INFO0_CLEAR_STATS BIT(8) + +struct hal_reo_get_queue_stats { + struct hal_reo_cmd_hdr cmd; + u32 queue_addr_lo; + u32 info0; + u32 rsvd0[6]; +} __packed; + +/* hal_reo_get_queue_stats + * Producer: SW + * Consumer: REO + * + * cmd + * Details for command execution tracking purposes. + * + * queue_addr_lo + * Address (lower 32 bits) of the REO queue descriptor. + * + * queue_addr_hi + * Address (upper 8 bits) of the REO queue descriptor. + * + * clear_stats + * Clear stats settings. When set, Clear the stats after + * generating the status. + * + * Following stats will be cleared. + * Timeout_count + * Forward_due_to_bar_count + * Duplicate_count + * Frames_in_order_count + * BAR_received_count + * MPDU_Frames_processed_count + * MSDU_Frames_processed_count + * Total_processed_byte_count + * Late_receive_MPDU_count + * window_jump_2k + * Hole_count + */ + +#define HAL_REO_FLUSH_QUEUE_INFO0_DESC_ADDR_HI GENMASK(7, 0) +#define HAL_REO_FLUSH_QUEUE_INFO0_BLOCK_DESC_ADDR BIT(8) +#define HAL_REO_FLUSH_QUEUE_INFO0_BLOCK_RESRC_IDX GENMASK(10, 9) + +struct hal_reo_flush_queue { + struct hal_reo_cmd_hdr cmd; + u32 desc_addr_lo; + u32 info0; + u32 rsvd0[6]; +} __packed; + +#define HAL_REO_FLUSH_CACHE_INFO0_CACHE_ADDR_HI GENMASK(7, 0) +#define HAL_REO_FLUSH_CACHE_INFO0_FWD_ALL_MPDUS BIT(8) +#define HAL_REO_FLUSH_CACHE_INFO0_RELEASE_BLOCK_IDX BIT(9) +#define HAL_REO_FLUSH_CACHE_INFO0_BLOCK_RESRC_IDX GENMASK(11, 10) +#define HAL_REO_FLUSH_CACHE_INFO0_FLUSH_WO_INVALIDATE BIT(12) +#define HAL_REO_FLUSH_CACHE_INFO0_BLOCK_CACHE_USAGE BIT(13) +#define HAL_REO_FLUSH_CACHE_INFO0_FLUSH_ALL BIT(14) + +struct hal_reo_flush_cache { + struct hal_reo_cmd_hdr cmd; + u32 cache_addr_lo; + u32 info0; + u32 rsvd0[6]; +} __packed; + +#define HAL_TCL_DATA_CMD_INFO0_DESC_TYPE BIT(0) +#define HAL_TCL_DATA_CMD_INFO0_EPD BIT(1) +#define HAL_TCL_DATA_CMD_INFO0_ENCAP_TYPE GENMASK(3, 2) +#define HAL_TCL_DATA_CMD_INFO0_ENCRYPT_TYPE GENMASK(7, 4) +#define HAL_TCL_DATA_CMD_INFO0_SRC_BUF_SWAP BIT(8) +#define HAL_TCL_DATA_CMD_INFO0_LNK_META_SWAP BIT(9) +#define HAL_TCL_DATA_CMD_INFO0_SEARCH_TYPE BIT(12) +#define HAL_TCL_DATA_CMD_INFO0_ADDRX_EN BIT(14) +#define HAL_TCL_DATA_CMD_INFO0_ADDRY_EN BIT(15) +#define HAL_TCL_DATA_CMD_INFO0_CMD_NUM GENMASK(31, 16) + +#define HAL_TCL_DATA_CMD_INFO1_DATA_LEN GENMASK(15, 0) +#define HAL_TCL_DATA_CMD_INFO1_IP4_CKSUM_EN BIT(16) +#define HAL_TCL_DATA_CMD_INFO1_UDP4_CKSUM_EN BIT(17) +#define HAL_TCL_DATA_CMD_INFO1_UDP6_CKSUM_EN BIT(18) +#define HAL_TCL_DATA_CMD_INFO1_TCP4_CKSUM_EN BIT(19) +#define HAL_TCL_DATA_CMD_INFO1_TCP6_CKSUM_EN BIT(20) +#define HAL_TCL_DATA_CMD_INFO1_TO_FW BIT(21) +#define HAL_TCL_DATA_CMD_INFO1_PKT_OFFSET GENMASK(31, 23) + +#define HAL_TCL_DATA_CMD_INFO2_BUF_TIMESTAMP GENMASK(18, 0) +#define HAL_TCL_DATA_CMD_INFO2_BUF_T_VALID BIT(19) +#define HAL_TCL_DATA_CMD_INFO2_MESH_ENABLE BIT(20) +#define HAL_TCL_DATA_CMD_INFO2_TID_OVERWRITE BIT(21) +#define HAL_TCL_DATA_CMD_INFO2_TID GENMASK(25, 22) +#define HAL_TCL_DATA_CMD_INFO2_LMAC_ID GENMASK(27, 26) + +#define HAL_TCL_DATA_CMD_INFO3_DSCP_TID_TABLE_IDX GENMASK(5, 0) +#define HAL_TCL_DATA_CMD_INFO3_SEARCH_INDEX GENMASK(25, 6) +#define HAL_TCL_DATA_CMD_INFO3_CACHE_SET_NUM GENMASK(29, 26) + +#define HAL_TCL_DATA_CMD_INFO4_RING_ID GENMASK(27, 20) +#define HAL_TCL_DATA_CMD_INFO4_LOOPING_COUNT GENMASK(31, 28) + +enum hal_encrypt_type { + HAL_ENCRYPT_TYPE_WEP_40, + HAL_ENCRYPT_TYPE_WEP_104, + HAL_ENCRYPT_TYPE_TKIP_NO_MIC, + HAL_ENCRYPT_TYPE_WEP_128, + HAL_ENCRYPT_TYPE_TKIP_MIC, + HAL_ENCRYPT_TYPE_WAPI, + HAL_ENCRYPT_TYPE_CCMP_128, + HAL_ENCRYPT_TYPE_OPEN, + HAL_ENCRYPT_TYPE_CCMP_256, + HAL_ENCRYPT_TYPE_GCMP_128, + HAL_ENCRYPT_TYPE_AES_GCMP_256, + HAL_ENCRYPT_TYPE_WAPI_GCM_SM4, +}; + +enum hal_tcl_encap_type { + HAL_TCL_ENCAP_TYPE_RAW, + HAL_TCL_ENCAP_TYPE_NATIVE_WIFI, + HAL_TCL_ENCAP_TYPE_ETHERNET, + HAL_TCL_ENCAP_TYPE_802_3 = 3, +}; + +enum hal_tcl_desc_type { + HAL_TCL_DESC_TYPE_BUFFER, + HAL_TCL_DESC_TYPE_EXT_DESC, +}; + +enum hal_wbm_htt_tx_comp_status { + HAL_WBM_REL_HTT_TX_COMP_STATUS_OK, + HAL_WBM_REL_HTT_TX_COMP_STATUS_DROP, + HAL_WBM_REL_HTT_TX_COMP_STATUS_TTL, + HAL_WBM_REL_HTT_TX_COMP_STATUS_REINJ, + HAL_WBM_REL_HTT_TX_COMP_STATUS_INSPECT, + HAL_WBM_REL_HTT_TX_COMP_STATUS_MEC_NOTIFY, +}; + +struct hal_tcl_data_cmd { + struct ath11k_buffer_addr buf_addr_info; + u32 info0; + u32 info1; + u32 info2; + u32 info3; + u32 info4; +} __packed; + +/* hal_tcl_data_cmd + * + * buf_addr_info + * Details of the physical address of a buffer or MSDU + * link descriptor. + * + * desc_type + * Indicates the type of address provided in the buf_addr_info. + * Values are defined in enum %HAL_REO_DEST_RING_BUFFER_TYPE_. + * + * epd + * When this bit is set then input packet is an EPD type. + * + * encap_type + * Indicates the encapsulation that HW will perform. Values are + * defined in enum %HAL_TCL_ENCAP_TYPE_. + * + * encrypt_type + * Field only valid for encap_type: RAW + * Values are defined in enum %HAL_ENCRYPT_TYPE_. + * + * src_buffer_swap + * Treats source memory (packet buffer) organization as big-endian. + * 1'b0: Source memory is little endian + * 1'b1: Source memory is big endian + * + * link_meta_swap + * Treats link descriptor and Metadata as big-endian. + * 1'b0: memory is little endian + * 1'b1: memory is big endian + * + * search_type + * Search type select + * 0 - Normal search, 1 - Index based address search, + * 2 - Index based flow search + * + * addrx_en + * addry_en + * Address X/Y search enable in ASE correspondingly. + * 1'b0: Search disable + * 1'b1: Search Enable + * + * cmd_num + * This number can be used to match against status. + * + * data_length + * MSDU length in case of direct descriptor. Length of link + * extension descriptor in case of Link extension descriptor. + * + * *_checksum_en + * Enable checksum replacement for ipv4, udp_over_ipv4, ipv6, + * udp_over_ipv6, tcp_over_ipv4 and tcp_over_ipv6. + * + * to_fw + * Forward packet to FW along with classification result. The + * packet will not be forward to TQM when this bit is set. + * 1'b0: Use classification result to forward the packet. + * 1'b1: Override classification result & forward packet only to fw + * + * packet_offset + * Packet offset from Metadata in case of direct buffer descriptor. + * + * buffer_timestamp + * buffer_timestamp_valid + * Frame system entrance timestamp. It shall be filled by first + * module (SW, TCL or TQM) that sees the frames first. + * + * mesh_enable + * For raw WiFi frames, this indicates transmission to a mesh STA, + * enabling the interpretation of the 'Mesh Control Present' bit + * (bit 8) of QoS Control. + * For native WiFi frames, this indicates that a 'Mesh Control' + * field is present between the header and the LLC. + * + * hlos_tid_overwrite + * + * When set, TCL shall ignore the IP DSCP and VLAN PCP + * fields and use HLOS_TID as the final TID. Otherwise TCL + * shall consider the DSCP and PCP fields as well as HLOS_TID + * and choose a final TID based on the configured priority + * + * hlos_tid + * HLOS MSDU priority + * Field is used when HLOS_TID_overwrite is set. + * + * lmac_id + * TCL uses this LMAC_ID in address search, i.e, while + * finding matching entry for the packet in AST corresponding + * to given LMAC_ID + * + * If LMAC ID is all 1s (=> value 3), it indicates wildcard + * match for any MAC + * + * dscp_tid_table_num + * DSCP to TID mapping table number that need to be used + * for the MSDU. + * + * search_index + * The index that will be used for index based address or + * flow search. The field is valid when 'search_type' is 1 or 2. + * + * cache_set_num + * + * Cache set number that should be used to cache the index + * based search results, for address and flow search. This + * value should be equal to LSB four bits of the hash value of + * match data, in case of search index points to an entry which + * may be used in content based search also. The value can be + * anything when the entry pointed by search index will not be + * used for content based search. + * + * ring_id + * The buffer pointer ring ID. + * 0 refers to the IDLE ring + * 1 - N refers to other rings + * + * looping_count + * + * A count value that indicates the number of times the + * producer of entries into the Ring has looped around the + * ring. + * + * At initialization time, this value is set to 0. On the + * first loop, this value is set to 1. After the max value is + * reached allowed by the number of bits for this field, the + * count value continues with 0 again. + * + * In case SW is the consumer of the ring entries, it can + * use this field to figure out up to where the producer of + * entries has created new entries. This eliminates the need to + * check where the head pointer' of the ring is located once + * the SW starts processing an interrupt indicating that new + * entries have been put into this ring... + * + * Also note that SW if it wants only needs to look at the + * LSB bit of this count value. + */ + +#define HAL_TCL_DESC_LEN sizeof(struct hal_tcl_data_cmd) + +enum hal_tcl_gse_ctrl { + HAL_TCL_GSE_CTRL_RD_STAT, + HAL_TCL_GSE_CTRL_SRCH_DIS, + HAL_TCL_GSE_CTRL_WR_BK_SINGLE, + HAL_TCL_GSE_CTRL_WR_BK_ALL, + HAL_TCL_GSE_CTRL_INVAL_SINGLE, + HAL_TCL_GSE_CTRL_INVAL_ALL, + HAL_TCL_GSE_CTRL_WR_BK_INVAL_SINGLE, + HAL_TCL_GSE_CTRL_WR_BK_INVAL_ALL, + HAL_TCL_GSE_CTRL_CLR_STAT_SINGLE, +}; + +/* hal_tcl_gse_ctrl + * + * rd_stat + * Report or Read statistics + * srch_dis + * Search disable. Report only Hash. + * wr_bk_single + * Write Back single entry + * wr_bk_all + * Write Back entire cache entry + * inval_single + * Invalidate single cache entry + * inval_all + * Invalidate entire cache + * wr_bk_inval_single + * Write back and invalidate single entry in cache + * wr_bk_inval_all + * Write back and invalidate entire cache + * clr_stat_single + * Clear statistics for single entry + */ + +#define HAL_TCL_GSE_CMD_INFO0_CTRL_BUF_ADDR_HI GENMASK(7, 0) +#define HAL_TCL_GSE_CMD_INFO0_GSE_CTRL GENMASK(11, 8) +#define HAL_TCL_GSE_CMD_INFO0_GSE_SEL BIT(12) +#define HAL_TCL_GSE_CMD_INFO0_STATUS_DEST_RING_ID BIT(13) +#define HAL_TCL_GSE_CMD_INFO0_SWAP BIT(14) + +#define HAL_TCL_GSE_CMD_INFO1_RING_ID GENMASK(27, 20) +#define HAL_TCL_GSE_CMD_INFO1_LOOPING_COUNT GENMASK(31, 28) + +struct hal_tcl_gse_cmd { + u32 ctrl_buf_addr_lo; + u32 info0; + u32 meta_data[2]; + u32 rsvd0[2]; + u32 info1; +} __packed; + +/* hal_tcl_gse_cmd + * + * ctrl_buf_addr_lo, ctrl_buf_addr_hi + * Address of a control buffer containing additional info needed + * for this command execution. + * + * gse_ctrl + * GSE control operations. This includes cache operations and table + * entry statistics read/clear operation. Values are defined in + * enum %HAL_TCL_GSE_CTRL. + * + * gse_sel + * To select the ASE/FSE to do the operation mention by GSE_ctrl. + * 0: FSE select 1: ASE select + * + * status_destination_ring_id + * TCL status ring to which the GSE status needs to be send. + * + * swap + * Bit to enable byte swapping of contents of buffer. + * + * meta_data + * Meta data to be returned in the status descriptor + */ + +enum hal_tcl_cache_op_res { + HAL_TCL_CACHE_OP_RES_DONE, + HAL_TCL_CACHE_OP_RES_NOT_FOUND, + HAL_TCL_CACHE_OP_RES_TIMEOUT, +}; + +#define HAL_TCL_STATUS_RING_INFO0_GSE_CTRL GENMASK(3, 0) +#define HAL_TCL_STATUS_RING_INFO0_GSE_SEL BIT(4) +#define HAL_TCL_STATUS_RING_INFO0_CACHE_OP_RES GENMASK(6, 5) +#define HAL_TCL_STATUS_RING_INFO0_MSDU_CNT GENMASK(31, 8) + +#define HAL_TCL_STATUS_RING_INFO1_HASH_IDX GENMASK(19, 0) + +#define HAL_TCL_STATUS_RING_INFO2_RING_ID GENMASK(27, 20) +#define HAL_TCL_STATUS_RING_INFO2_LOOPING_COUNT GENMASK(31, 28) + +struct hal_tcl_status_ring { + u32 info0; + u32 msdu_byte_count; + u32 msdu_timestamp; + u32 meta_data[2]; + u32 info1; + u32 rsvd0; + u32 info2; +} __packed; + +/* hal_tcl_status_ring + * + * gse_ctrl + * GSE control operations. This includes cache operations and table + * entry statistics read/clear operation. Values are defined in + * enum %HAL_TCL_GSE_CTRL. + * + * gse_sel + * To select the ASE/FSE to do the operation mention by GSE_ctrl. + * 0: FSE select 1: ASE select + * + * cache_op_res + * Cache operation result. Values are defined in enum + * %HAL_TCL_CACHE_OP_RES_. + * + * msdu_cnt + * msdu_byte_count + * MSDU count of Entry and MSDU byte count for entry 1. + * + * hash_indx + * Hash value of the entry in case of search failed or disabled. + */ + +#define HAL_CE_SRC_DESC_ADDR_INFO_ADDR_HI GENMASK(7, 0) +#define HAL_CE_SRC_DESC_ADDR_INFO_HASH_EN BIT(8) +#define HAL_CE_SRC_DESC_ADDR_INFO_BYTE_SWAP BIT(9) +#define HAL_CE_SRC_DESC_ADDR_INFO_DEST_SWAP BIT(10) +#define HAL_CE_SRC_DESC_ADDR_INFO_GATHER BIT(11) +#define HAL_CE_SRC_DESC_ADDR_INFO_LEN GENMASK(31, 16) + +#define HAL_CE_SRC_DESC_META_INFO_DATA GENMASK(15, 0) + +#define HAL_CE_SRC_DESC_FLAGS_RING_ID GENMASK(27, 20) +#define HAL_CE_SRC_DESC_FLAGS_LOOP_CNT HAL_SRNG_DESC_LOOP_CNT + +struct hal_ce_srng_src_desc { + u32 buffer_addr_low; + u32 buffer_addr_info; /* %HAL_CE_SRC_DESC_ADDR_INFO_ */ + u32 meta_info; /* %HAL_CE_SRC_DESC_META_INFO_ */ + u32 flags; /* %HAL_CE_SRC_DESC_FLAGS_ */ +} __packed; + +/* + * hal_ce_srng_src_desc + * + * buffer_addr_lo + * LSB 32 bits of the 40 Bit Pointer to the source buffer + * + * buffer_addr_hi + * MSB 8 bits of the 40 Bit Pointer to the source buffer + * + * toeplitz_en + * Enable generation of 32-bit Toeplitz-LFSR hash for + * data transfer. In case of gather field in first source + * ring entry of the gather copy cycle in taken into account. + * + * src_swap + * Treats source memory organization as big-endian. For + * each dword read (4 bytes), the byte 0 is swapped with byte 3 + * and byte 1 is swapped with byte 2. + * In case of gather field in first source ring entry of + * the gather copy cycle in taken into account. + * + * dest_swap + * Treats destination memory organization as big-endian. + * For each dword write (4 bytes), the byte 0 is swapped with + * byte 3 and byte 1 is swapped with byte 2. + * In case of gather field in first source ring entry of + * the gather copy cycle in taken into account. + * + * gather + * Enables gather of multiple copy engine source + * descriptors to one destination. + * + * ce_res_0 + * Reserved + * + * + * length + * Length of the buffer in units of octets of the current + * descriptor + * + * fw_metadata + * Meta data used by FW. + * In case of gather field in first source ring entry of + * the gather copy cycle in taken into account. + * + * ce_res_1 + * Reserved + * + * ce_res_2 + * Reserved + * + * ring_id + * The buffer pointer ring ID. + * 0 refers to the IDLE ring + * 1 - N refers to other rings + * Helps with debugging when dumping ring contents. + * + * looping_count + * A count value that indicates the number of times the + * producer of entries into the Ring has looped around the + * ring. + * + * At initialization time, this value is set to 0. On the + * first loop, this value is set to 1. After the max value is + * reached allowed by the number of bits for this field, the + * count value continues with 0 again. + * + * In case SW is the consumer of the ring entries, it can + * use this field to figure out up to where the producer of + * entries has created new entries. This eliminates the need to + * check where the head pointer' of the ring is located once + * the SW starts processing an interrupt indicating that new + * entries have been put into this ring... + * + * Also note that SW if it wants only needs to look at the + * LSB bit of this count value. + */ + +#define HAL_CE_DEST_DESC_ADDR_INFO_ADDR_HI GENMASK(7, 0) +#define HAL_CE_DEST_DESC_ADDR_INFO_RING_ID GENMASK(27, 20) +#define HAL_CE_DEST_DESC_ADDR_INFO_LOOP_CNT HAL_SRNG_DESC_LOOP_CNT + +struct hal_ce_srng_dest_desc { + u32 buffer_addr_low; + u32 buffer_addr_info; /* %HAL_CE_DEST_DESC_ADDR_INFO_ */ +} __packed; + +/* hal_ce_srng_dest_desc + * + * dst_buffer_low + * LSB 32 bits of the 40 Bit Pointer to the Destination + * buffer + * + * dst_buffer_high + * MSB 8 bits of the 40 Bit Pointer to the Destination + * buffer + * + * ce_res_4 + * Reserved + * + * ring_id + * The buffer pointer ring ID. + * 0 refers to the IDLE ring + * 1 - N refers to other rings + * Helps with debugging when dumping ring contents. + * + * looping_count + * A count value that indicates the number of times the + * producer of entries into the Ring has looped around the + * ring. + * + * At initialization time, this value is set to 0. On the + * first loop, this value is set to 1. After the max value is + * reached allowed by the number of bits for this field, the + * count value continues with 0 again. + * + * In case SW is the consumer of the ring entries, it can + * use this field to figure out up to where the producer of + * entries has created new entries. This eliminates the need to + * check where the head pointer' of the ring is located once + * the SW starts processing an interrupt indicating that new + * entries have been put into this ring... + * + * Also note that SW if it wants only needs to look at the + * LSB bit of this count value. + */ + +#define HAL_CE_DST_STATUS_DESC_FLAGS_HASH_EN BIT(8) +#define HAL_CE_DST_STATUS_DESC_FLAGS_BYTE_SWAP BIT(9) +#define HAL_CE_DST_STATUS_DESC_FLAGS_DEST_SWAP BIT(10) +#define HAL_CE_DST_STATUS_DESC_FLAGS_GATHER BIT(11) +#define HAL_CE_DST_STATUS_DESC_FLAGS_LEN GENMASK(31, 16) + +#define HAL_CE_DST_STATUS_DESC_META_INFO_DATA GENMASK(7, 0) +#define HAL_CE_DST_STATUS_DESC_META_INFO_RING_ID GENMASK(27, 20) +#define HAL_CE_DST_STATUS_DESC_META_INFO_LOOP_CNT HAL_SRNG_DESC_LOOP_CNT + +struct hal_ce_srng_dst_status_desc { + u32 flags; /* %HAL_CE_DST_STATUS_DESC_FLAGS_ */ + u32 toeplitz_hash0; + u32 toeplitz_hash1; + u32 meta_info; /* HAL_CE_DST_STATUS_DESC_META_INFO_ */ +} __packed; + +/* hal_ce_srng_dst_status_desc + * + * ce_res_5 + * Reserved + * + * toeplitz_en + * + * src_swap + * Source memory buffer swapped + * + * dest_swap + * Destination memory buffer swapped + * + * gather + * Gather of multiple copy engine source descriptors to one + * destination enabled + * + * ce_res_6 + * Reserved + * + * length + * Sum of all the Lengths of the source descriptor in the + * gather chain + * + * toeplitz_hash_0 + * 32 LS bits of 64 bit Toeplitz LFSR hash result + * + * toeplitz_hash_1 + * 32 MS bits of 64 bit Toeplitz LFSR hash result + * + * fw_metadata + * Meta data used by FW + * In case of gather field in first source ring entry of + * the gather copy cycle in taken into account. + * + * ce_res_7 + * Reserved + * + * ring_id + * The buffer pointer ring ID. + * 0 refers to the IDLE ring + * 1 - N refers to other rings + * Helps with debugging when dumping ring contents. + * + * looping_count + * A count value that indicates the number of times the + * producer of entries into the Ring has looped around the + * ring. + * + * At initialization time, this value is set to 0. On the + * first loop, this value is set to 1. After the max value is + * reached allowed by the number of bits for this field, the + * count value continues with 0 again. + * + * In case SW is the consumer of the ring entries, it can + * use this field to figure out up to where the producer of + * entries has created new entries. This eliminates the need to + * check where the head pointer' of the ring is located once + * the SW starts processing an interrupt indicating that new + * entries have been put into this ring... + * + * Also note that SW if it wants only needs to look at the + * LSB bit of this count value. + */ + +#define HAL_TX_RATE_STATS_INFO0_VALID BIT(0) +#define HAL_TX_RATE_STATS_INFO0_BW GENMASK(2, 1) +#define HAL_TX_RATE_STATS_INFO0_PKT_TYPE GENMASK(6, 3) +#define HAL_TX_RATE_STATS_INFO0_STBC BIT(7) +#define HAL_TX_RATE_STATS_INFO0_LDPC BIT(8) +#define HAL_TX_RATE_STATS_INFO0_SGI GENMASK(10, 9) +#define HAL_TX_RATE_STATS_INFO0_MCS GENMASK(14, 11) +#define HAL_TX_RATE_STATS_INFO0_OFDMA_TX BIT(15) +#define HAL_TX_RATE_STATS_INFO0_TONES_IN_RU GENMASK(27, 16) + +enum hal_tx_rate_stats_bw { + HAL_TX_RATE_STATS_BW_20, + HAL_TX_RATE_STATS_BW_40, + HAL_TX_RATE_STATS_BW_80, + HAL_TX_RATE_STATS_BW_160, +}; + +enum hal_tx_rate_stats_pkt_type { + HAL_TX_RATE_STATS_PKT_TYPE_11A, + HAL_TX_RATE_STATS_PKT_TYPE_11B, + HAL_TX_RATE_STATS_PKT_TYPE_11N, + HAL_TX_RATE_STATS_PKT_TYPE_11AC, + HAL_TX_RATE_STATS_PKT_TYPE_11AX, +}; + +enum hal_tx_rate_stats_sgi { + HAL_TX_RATE_STATS_SGI_08US, + HAL_TX_RATE_STATS_SGI_04US, + HAL_TX_RATE_STATS_SGI_16US, + HAL_TX_RATE_STATS_SGI_32US, +}; + +struct hal_tx_rate_stats { + u32 info0; + u32 tsf; +} __packed; + +struct hal_wbm_link_desc { + struct ath11k_buffer_addr buf_addr_info; +} __packed; + +/* hal_wbm_link_desc + * + * Producer: WBM + * Consumer: WBM + * + * buf_addr_info + * Details of the physical address of a buffer or MSDU + * link descriptor. + */ + +enum hal_wbm_rel_src_module { + HAL_WBM_REL_SRC_MODULE_TQM, + HAL_WBM_REL_SRC_MODULE_RXDMA, + HAL_WBM_REL_SRC_MODULE_REO, + HAL_WBM_REL_SRC_MODULE_FW, + HAL_WBM_REL_SRC_MODULE_SW, +}; + +enum hal_wbm_rel_desc_type { + HAL_WBM_REL_DESC_TYPE_REL_MSDU, + HAL_WBM_REL_DESC_TYPE_MSDU_LINK, + HAL_WBM_REL_DESC_TYPE_MPDU_LINK, + HAL_WBM_REL_DESC_TYPE_MSDU_EXT, + HAL_WBM_REL_DESC_TYPE_QUEUE_EXT, +}; + +/* hal_wbm_rel_desc_type + * + * msdu_buffer + * The address points to an MSDU buffer + * + * msdu_link_descriptor + * The address points to an Tx MSDU link descriptor + * + * mpdu_link_descriptor + * The address points to an MPDU link descriptor + * + * msdu_ext_descriptor + * The address points to an MSDU extension descriptor + * + * queue_ext_descriptor + * The address points to an TQM queue extension descriptor. WBM should + * treat this is the same way as a link descriptor. + */ + +enum hal_wbm_rel_bm_act { + HAL_WBM_REL_BM_ACT_PUT_IN_IDLE, + HAL_WBM_REL_BM_ACT_REL_MSDU, +}; + +/* hal_wbm_rel_bm_act + * + * put_in_idle_list + * Put the buffer or descriptor back in the idle list. In case of MSDU or + * MDPU link descriptor, BM does not need to check to release any + * individual MSDU buffers. + * + * release_msdu_list + * This BM action can only be used in combination with desc_type being + * msdu_link_descriptor. Field first_msdu_index points out which MSDU + * pointer in the MSDU link descriptor is the first of an MPDU that is + * released. BM shall release all the MSDU buffers linked to this first + * MSDU buffer pointer. All related MSDU buffer pointer entries shall be + * set to value 0, which represents the 'NULL' pointer. When all MSDU + * buffer pointers in the MSDU link descriptor are 'NULL', the MSDU link + * descriptor itself shall also be released. + */ + +#define HAL_WBM_RELEASE_INFO0_REL_SRC_MODULE GENMASK(2, 0) +#define HAL_WBM_RELEASE_INFO0_BM_ACTION GENMASK(5, 3) +#define HAL_WBM_RELEASE_INFO0_DESC_TYPE GENMASK(8, 6) +#define HAL_WBM_RELEASE_INFO0_FIRST_MSDU_IDX GENMASK(12, 9) +#define HAL_WBM_RELEASE_INFO0_TQM_RELEASE_REASON GENMASK(16, 13) +#define HAL_WBM_RELEASE_INFO0_RXDMA_PUSH_REASON GENMASK(18, 17) +#define HAL_WBM_RELEASE_INFO0_RXDMA_ERROR_CODE GENMASK(23, 19) +#define HAL_WBM_RELEASE_INFO0_REO_PUSH_REASON GENMASK(25, 24) +#define HAL_WBM_RELEASE_INFO0_REO_ERROR_CODE GENMASK(30, 26) +#define HAL_WBM_RELEASE_INFO0_WBM_INTERNAL_ERROR BIT(31) + +#define HAL_WBM_RELEASE_INFO1_TQM_STATUS_NUMBER GENMASK(23, 0) +#define HAL_WBM_RELEASE_INFO1_TRANSMIT_COUNT GENMASK(30, 24) + +#define HAL_WBM_RELEASE_INFO2_ACK_FRAME_RSSI GENMASK(7, 0) +#define HAL_WBM_RELEASE_INFO2_SW_REL_DETAILS_VALID BIT(8) +#define HAL_WBM_RELEASE_INFO2_FIRST_MSDU BIT(9) +#define HAL_WBM_RELEASE_INFO2_LAST_MSDU BIT(10) +#define HAL_WBM_RELEASE_INFO2_MSDU_IN_AMSDU BIT(11) +#define HAL_WBM_RELEASE_INFO2_FW_TX_NOTIF_FRAME BIT(12) +#define HAL_WBM_RELEASE_INFO2_BUFFER_TIMESTAMP GENMASK(31, 13) + +#define HAL_WBM_RELEASE_INFO3_PEER_ID GENMASK(15, 0) +#define HAL_WBM_RELEASE_INFO3_TID GENMASK(19, 16) +#define HAL_WBM_RELEASE_INFO3_RING_ID GENMASK(27, 20) +#define HAL_WBM_RELEASE_INFO3_LOOPING_COUNT GENMASK(31, 28) + +#define HAL_WBM_REL_HTT_TX_COMP_INFO0_STATUS GENMASK(12, 9) +#define HAL_WBM_REL_HTT_TX_COMP_INFO0_REINJ_REASON GENMASK(16, 13) +#define HAL_WBM_REL_HTT_TX_COMP_INFO0_EXP_FRAME BIT(17) + +struct hal_wbm_release_ring { + struct ath11k_buffer_addr buf_addr_info; + u32 info0; + u32 info1; + u32 info2; + struct hal_tx_rate_stats rate_stats; + u32 info3; +} __packed; + +/* hal_wbm_release_ring + * + * Producer: SW/TQM/RXDMA/REO/SWITCH + * Consumer: WBM/SW/FW + * + * HTT tx status is overlayed on wbm_release ring on 4-byte words 2, 3, 4 and 5 + * for software based completions. + * + * buf_addr_info + * Details of the physical address of the buffer or link descriptor. + * + * release_source_module + * Indicates which module initiated the release of this buffer/descriptor. + * Values are defined in enum %HAL_WBM_REL_SRC_MODULE_. + * + * bm_action + * Field only valid when the field return_buffer_manager in + * Released_buff_or_desc_addr_info indicates: + * WBM_IDLE_BUF_LIST / WBM_IDLE_DESC_LIST + * Values are defined in enum %HAL_WBM_REL_BM_ACT_. + * + * buffer_or_desc_type + * Field only valid when WBM is marked as the return_buffer_manager in + * the Released_Buffer_address_info. Indicates that type of buffer or + * descriptor is being released. Values are in enum %HAL_WBM_REL_DESC_TYPE. + * + * first_msdu_index + * Field only valid for the bm_action release_msdu_list. The index of the + * first MSDU in an MSDU link descriptor all belonging to the same MPDU. + * + * tqm_release_reason + * Field only valid when Release_source_module is set to release_source_TQM + * Release reasons are defined in enum %HAL_WBM_TQM_REL_REASON_. + * + * rxdma_push_reason + * reo_push_reason + * Indicates why rxdma/reo pushed the frame to this ring and values are + * defined in enum %HAL_REO_DEST_RING_PUSH_REASON_. + * + * rxdma_error_code + * Field only valid when 'rxdma_push_reason' set to 'error_detected'. + * Values are defined in enum %HAL_REO_ENTR_RING_RXDMA_ECODE_. + * + * reo_error_code + * Field only valid when 'reo_push_reason' set to 'error_detected'. Values + * are defined in enum %HAL_REO_DEST_RING_ERROR_CODE_. + * + * wbm_internal_error + * Is set when WBM got a buffer pointer but the action was to push it to + * the idle link descriptor ring or do link related activity OR + * Is set when WBM got a link buffer pointer but the action was to push it + * to the buffer descriptor ring. + * + * tqm_status_number + * The value in this field is equal to tqm_cmd_number in TQM command. It is + * used to correlate the statu with TQM commands. Only valid when + * release_source_module is TQM. + * + * transmit_count + * The number of times the frame has been transmitted, valid only when + * release source in TQM. + * + * ack_frame_rssi + * This field is only valid when the source is TQM. If this frame is + * removed as the result of the reception of an ACK or BA, this field + * indicates the RSSI of the received ACK or BA frame. + * + * sw_release_details_valid + * This is set when WMB got a 'release_msdu_list' command from TQM and + * return buffer manager is not WMB. WBM will then de-aggregate all MSDUs + * and pass them one at a time on to the 'buffer owner'. + * + * first_msdu + * Field only valid when SW_release_details_valid is set. + * When set, this MSDU is the first MSDU pointed to in the + * 'release_msdu_list' command. + * + * last_msdu + * Field only valid when SW_release_details_valid is set. + * When set, this MSDU is the last MSDU pointed to in the + * 'release_msdu_list' command. + * + * msdu_part_of_amsdu + * Field only valid when SW_release_details_valid is set. + * When set, this MSDU was part of an A-MSDU in MPDU + * + * fw_tx_notify_frame + * Field only valid when SW_release_details_valid is set. + * + * buffer_timestamp + * Field only valid when SW_release_details_valid is set. + * This is the Buffer_timestamp field from the + * Timestamp in units of 1024 us + * + * struct hal_tx_rate_stats rate_stats + * Details for command execution tracking purposes. + * + * sw_peer_id + * tid + * Field only valid when Release_source_module is set to + * release_source_TQM + * + * 1) Release of msdu buffer due to drop_frame = 1. Flow is + * not fetched and hence sw_peer_id and tid = 0 + * + * buffer_or_desc_type = e_num 0 + * MSDU_rel_buffertqm_release_reason = e_num 1 + * tqm_rr_rem_cmd_rem + * + * 2) Release of msdu buffer due to Flow is not fetched and + * hence sw_peer_id and tid = 0 + * + * buffer_or_desc_type = e_num 0 + * MSDU_rel_buffertqm_release_reason = e_num 1 + * tqm_rr_rem_cmd_rem + * + * 3) Release of msdu link due to remove_mpdu or acked_mpdu + * command. + * + * buffer_or_desc_type = e_num1 + * msdu_link_descriptortqm_release_reason can be:e_num 1 + * tqm_rr_rem_cmd_reme_num 2 tqm_rr_rem_cmd_tx + * e_num 3 tqm_rr_rem_cmd_notxe_num 4 tqm_rr_rem_cmd_aged + * + * This field represents the TID from the TX_MSDU_FLOW + * descriptor or TX_MPDU_QUEUE descriptor + * + * rind_id + * For debugging. + * This field is filled in by the SRNG module. + * It help to identify the ring that is being looked + * + * looping_count + * A count value that indicates the number of times the + * producer of entries into the Buffer Manager Ring has looped + * around the ring. + * + * At initialization time, this value is set to 0. On the + * first loop, this value is set to 1. After the max value is + * reached allowed by the number of bits for this field, the + * count value continues with 0 again. + * + * In case SW is the consumer of the ring entries, it can + * use this field to figure out up to where the producer of + * entries has created new entries. This eliminates the need to + * check where the head pointer' of the ring is located once + * the SW starts processing an interrupt indicating that new + * entries have been put into this ring... + * + * Also note that SW if it wants only needs to look at the + * LSB bit of this count value. + */ + +/** + * enum hal_wbm_tqm_rel_reason - TQM release reason code + * @HAL_WBM_TQM_REL_REASON_FRAME_ACKED: ACK or BACK received for the frame + * @HAL_WBM_TQM_REL_REASON_CMD_REMOVE_MPDU: Command remove_mpdus initiated by SW + * @HAL_WBM_TQM_REL_REASON_CMD_REMOVE_TX: Command remove transmitted_mpdus + * initiated by sw. + * @HAL_WBM_TQM_REL_REASON_CMD_REMOVE_NOTX: Command remove untransmitted_mpdus + * initiated by sw. + * @HAL_WBM_TQM_REL_REASON_CMD_REMOVE_AGED_FRAMES: Command remove aged msdus or + * mpdus. + * @HAL_WBM_TQM_REL_REASON_CMD_REMOVE_RESEAON1: Remove command initiated by + * fw with fw_reason1. + * @HAL_WBM_TQM_REL_REASON_CMD_REMOVE_RESEAON2: Remove command initiated by + * fw with fw_reason2. + * @HAL_WBM_TQM_REL_REASON_CMD_REMOVE_RESEAON3: Remove command initiated by + * fw with fw_reason3. + */ +enum hal_wbm_tqm_rel_reason { + HAL_WBM_TQM_REL_REASON_FRAME_ACKED, + HAL_WBM_TQM_REL_REASON_CMD_REMOVE_MPDU, + HAL_WBM_TQM_REL_REASON_CMD_REMOVE_TX, + HAL_WBM_TQM_REL_REASON_CMD_REMOVE_NOTX, + HAL_WBM_TQM_REL_REASON_CMD_REMOVE_AGED_FRAMES, + HAL_WBM_TQM_REL_REASON_CMD_REMOVE_RESEAON1, + HAL_WBM_TQM_REL_REASON_CMD_REMOVE_RESEAON2, + HAL_WBM_TQM_REL_REASON_CMD_REMOVE_RESEAON3, +}; + +struct hal_wbm_buffer_ring { + struct ath11k_buffer_addr buf_addr_info; +}; + +enum hal_desc_owner { + HAL_DESC_OWNER_WBM, + HAL_DESC_OWNER_SW, + HAL_DESC_OWNER_TQM, + HAL_DESC_OWNER_RXDMA, + HAL_DESC_OWNER_REO, + HAL_DESC_OWNER_SWITCH, +}; + +enum hal_desc_buf_type { + HAL_DESC_BUF_TYPE_TX_MSDU_LINK, + HAL_DESC_BUF_TYPE_TX_MPDU_LINK, + HAL_DESC_BUF_TYPE_TX_MPDU_QUEUE_HEAD, + HAL_DESC_BUF_TYPE_TX_MPDU_QUEUE_EXT, + HAL_DESC_BUF_TYPE_TX_FLOW, + HAL_DESC_BUF_TYPE_TX_BUFFER, + HAL_DESC_BUF_TYPE_RX_MSDU_LINK, + HAL_DESC_BUF_TYPE_RX_MPDU_LINK, + HAL_DESC_BUF_TYPE_RX_REO_QUEUE, + HAL_DESC_BUF_TYPE_RX_REO_QUEUE_EXT, + HAL_DESC_BUF_TYPE_RX_BUFFER, + HAL_DESC_BUF_TYPE_IDLE_LINK, +}; + +#define HAL_DESC_REO_OWNED 4 +#define HAL_DESC_REO_QUEUE_DESC 8 +#define HAL_DESC_REO_QUEUE_EXT_DESC 9 +#define HAL_DESC_REO_NON_QOS_TID 16 + +#define HAL_DESC_HDR_INFO0_OWNER GENMASK(3, 0) +#define HAL_DESC_HDR_INFO0_BUF_TYPE GENMASK(7, 4) +#define HAL_DESC_HDR_INFO0_DBG_RESERVED GENMASK(31, 8) + +struct hal_desc_header { + u32 info0; +} __packed; + +struct hal_rx_mpdu_link_ptr { + struct ath11k_buffer_addr addr_info; +} __packed; + +struct hal_rx_msdu_details { + struct ath11k_buffer_addr buf_addr_info; + struct rx_msdu_desc rx_msdu_info; +} __packed; + +#define HAL_RX_MSDU_LNK_INFO0_RX_QUEUE_NUMBER GENMASK(15, 0) +#define HAL_RX_MSDU_LNK_INFO0_FIRST_MSDU_LNK BIT(16) + +struct hal_rx_msdu_link { + struct hal_desc_header desc_hdr; + struct ath11k_buffer_addr buf_addr_info; + u32 info0; + u32 pn[4]; + struct hal_rx_msdu_details msdu_link[6]; +} __packed; + +struct hal_rx_reo_queue_ext { + struct hal_desc_header desc_hdr; + u32 rsvd; + struct hal_rx_mpdu_link_ptr mpdu_link[15]; +} __packed; + +/* hal_rx_reo_queue_ext + * Consumer: REO + * Producer: REO + * + * descriptor_header + * Details about which module owns this struct. + * + * mpdu_link + * Pointer to the next MPDU_link descriptor in the MPDU queue. + */ + +enum hal_rx_reo_queue_pn_size { + HAL_RX_REO_QUEUE_PN_SIZE_24, + HAL_RX_REO_QUEUE_PN_SIZE_48, + HAL_RX_REO_QUEUE_PN_SIZE_128, +}; + +#define HAL_RX_REO_QUEUE_RX_QUEUE_NUMBER GENMASK(15, 0) + +#define HAL_RX_REO_QUEUE_INFO0_VLD BIT(0) +#define HAL_RX_REO_QUEUE_INFO0_ASSOC_LNK_DESC_COUNTER GENMASK(2, 1) +#define HAL_RX_REO_QUEUE_INFO0_DIS_DUP_DETECTION BIT(3) +#define HAL_RX_REO_QUEUE_INFO0_SOFT_REORDER_EN BIT(4) +#define HAL_RX_REO_QUEUE_INFO0_AC GENMASK(6, 5) +#define HAL_RX_REO_QUEUE_INFO0_BAR BIT(7) +#define HAL_RX_REO_QUEUE_INFO0_RETRY BIT(8) +#define HAL_RX_REO_QUEUE_INFO0_CHECK_2K_MODE BIT(9) +#define HAL_RX_REO_QUEUE_INFO0_OOR_MODE BIT(10) +#define HAL_RX_REO_QUEUE_INFO0_BA_WINDOW_SIZE GENMASK(18, 11) +#define HAL_RX_REO_QUEUE_INFO0_PN_CHECK BIT(19) +#define HAL_RX_REO_QUEUE_INFO0_EVEN_PN BIT(20) +#define HAL_RX_REO_QUEUE_INFO0_UNEVEN_PN BIT(21) +#define HAL_RX_REO_QUEUE_INFO0_PN_HANDLE_ENABLE BIT(22) +#define HAL_RX_REO_QUEUE_INFO0_PN_SIZE GENMASK(24, 23) +#define HAL_RX_REO_QUEUE_INFO0_IGNORE_AMPDU_FLG BIT(25) + +#define HAL_RX_REO_QUEUE_INFO1_SVLD BIT(0) +#define HAL_RX_REO_QUEUE_INFO1_SSN GENMASK(12, 1) +#define HAL_RX_REO_QUEUE_INFO1_CURRENT_IDX GENMASK(20, 13) +#define HAL_RX_REO_QUEUE_INFO1_SEQ_2K_ERR BIT(21) +#define HAL_RX_REO_QUEUE_INFO1_PN_ERR BIT(22) +#define HAL_RX_REO_QUEUE_INFO1_PN_VALID BIT(31) + +#define HAL_RX_REO_QUEUE_INFO2_MPDU_COUNT GENMASK(6, 0) +#define HAL_RX_REO_QUEUE_INFO2_MSDU_COUNT (31, 7) + +#define HAL_RX_REO_QUEUE_INFO3_TIMEOUT_COUNT GENMASK(9, 4) +#define HAL_RX_REO_QUEUE_INFO3_FWD_DUE_TO_BAR_CNT GENMASK(15, 10) +#define HAL_RX_REO_QUEUE_INFO3_DUPLICATE_COUNT GENMASK(31, 10) + +#define HAL_RX_REO_QUEUE_INFO4_FRAME_IN_ORD_COUNT GENMASK(23, 0) +#define HAL_RX_REO_QUEUE_INFO4_BAR_RECVD_COUNT GENMASK(31, 24) + +#define HAL_RX_REO_QUEUE_INFO5_LATE_RX_MPDU_COUNT GENMASK(11, 0) +#define HAL_RX_REO_QUEUE_INFO5_WINDOW_JUMP_2K GENMASK(15, 12) +#define HAL_RX_REO_QUEUE_INFO5_HOLE_COUNT GENMASK(31, 16) + +struct hal_rx_reo_queue { + struct hal_desc_header desc_hdr; + u32 rx_queue_num; + u32 info0; + u32 info1; + u32 pn[4]; + u32 last_rx_enqueue_timestamp; + u32 last_rx_dequeue_timestamp; + u32 next_aging_queue[2]; + u32 prev_aging_queue[2]; + u32 rx_bitmap[8]; + u32 info2; + u32 info3; + u32 info4; + u32 processed_mpdus; + u32 processed_msdus; + u32 processed_total_bytes; + u32 info5; + u32 rsvd[3]; + struct hal_rx_reo_queue_ext ext_desc[0]; +} __packed; + +/* hal_rx_reo_queue + * + * descriptor_header + * Details about which module owns this struct. Note that sub field + * Buffer_type shall be set to receive_reo_queue_descriptor. + * + * receive_queue_number + * Indicates the MPDU queue ID to which this MPDU link descriptor belongs. + * + * vld + * Valid bit indicating a session is established and the queue descriptor + * is valid. + * associated_link_descriptor_counter + * Indicates which of the 3 link descriptor counters shall be incremented + * or decremented when link descriptors are added or removed from this + * flow queue. + * disable_duplicate_detection + * When set, do not perform any duplicate detection. + * soft_reorder_enable + * When set, REO has been instructed to not perform the actual re-ordering + * of frames for this queue, but just to insert the reorder opcodes. + * ac + * Indicates the access category of the queue descriptor. + * bar + * Indicates if BAR has been received. + * retry + * Retry bit is checked if this bit is set. + * chk_2k_mode + * Indicates what type of operation is expected from Reo when the received + * frame SN falls within the 2K window. + * oor_mode + * Indicates what type of operation is expected when the received frame + * falls within the OOR window. + * ba_window_size + * Indicates the negotiated (window size + 1). Max of 256 bits. + * + * A value 255 means 256 bitmap, 63 means 64 bitmap, 0 (means non-BA + * session, with window size of 0). The 3 values here are the main values + * validated, but other values should work as well. + * + * A BA window size of 0 (=> one frame entry bitmat), means that there is + * no additional rx_reo_queue_ext desc. following rx_reo_queue in memory. + * A BA window size of 1 - 105, means that there is 1 rx_reo_queue_ext. + * A BA window size of 106 - 210, means that there are 2 rx_reo_queue_ext. + * A BA window size of 211 - 256, means that there are 3 rx_reo_queue_ext. + * pn_check_needed, pn_shall_be_even, pn_shall_be_uneven, pn_handling_enable, + * pn_size + * REO shall perform the PN increment check, even number check, uneven + * number check, PN error check and size of the PN field check. + * ignore_ampdu_flag + * REO shall ignore the ampdu_flag on entrance descriptor for this queue. + * + * svld + * Sequence number in next field is valid one. + * ssn + * Starting Sequence number of the session. + * current_index + * Points to last forwarded packet + * seq_2k_error_detected_flag + * REO has detected a 2k error jump in the sequence number and from that + * moment forward, all new frames are forwarded directly to FW, without + * duplicate detect, reordering, etc. + * pn_error_detected_flag + * REO has detected a PN error. + */ + +#define HAL_REO_UPD_RX_QUEUE_INFO0_QUEUE_ADDR_HI GENMASK(7, 0) +#define HAL_REO_UPD_RX_QUEUE_INFO0_UPD_RX_QUEUE_NUM BIT(8) +#define HAL_REO_UPD_RX_QUEUE_INFO0_UPD_VLD BIT(9) +#define HAL_REO_UPD_RX_QUEUE_INFO0_UPD_ASSOC_LNK_DESC_CNT BIT(10) +#define HAL_REO_UPD_RX_QUEUE_INFO0_UPD_DIS_DUP_DETECTION BIT(11) +#define HAL_REO_UPD_RX_QUEUE_INFO0_UPD_SOFT_REORDER_EN BIT(12) +#define HAL_REO_UPD_RX_QUEUE_INFO0_UPD_AC BIT(13) +#define HAL_REO_UPD_RX_QUEUE_INFO0_UPD_BAR BIT(14) +#define HAL_REO_UPD_RX_QUEUE_INFO0_UPD_RETRY BIT(15) +#define HAL_REO_UPD_RX_QUEUE_INFO0_UPD_CHECK_2K_MODE BIT(16) +#define HAL_REO_UPD_RX_QUEUE_INFO0_UPD_OOR_MODE BIT(17) +#define HAL_REO_UPD_RX_QUEUE_INFO0_UPD_BA_WINDOW_SIZE BIT(18) +#define HAL_REO_UPD_RX_QUEUE_INFO0_UPD_PN_CHECK BIT(19) +#define HAL_REO_UPD_RX_QUEUE_INFO0_UPD_EVEN_PN BIT(20) +#define HAL_REO_UPD_RX_QUEUE_INFO0_UPD_UNEVEN_PN BIT(21) +#define HAL_REO_UPD_RX_QUEUE_INFO0_UPD_PN_HANDLE_ENABLE BIT(22) +#define HAL_REO_UPD_RX_QUEUE_INFO0_UPD_PN_SIZE BIT(23) +#define HAL_REO_UPD_RX_QUEUE_INFO0_UPD_IGNORE_AMPDU_FLG BIT(24) +#define HAL_REO_UPD_RX_QUEUE_INFO0_UPD_SVLD BIT(25) +#define HAL_REO_UPD_RX_QUEUE_INFO0_UPD_SSN BIT(26) +#define HAL_REO_UPD_RX_QUEUE_INFO0_UPD_SEQ_2K_ERR BIT(27) +#define HAL_REO_UPD_RX_QUEUE_INFO0_UPD_PN_ERR BIT(28) +#define HAL_REO_UPD_RX_QUEUE_INFO0_UPD_PN_VALID BIT(29) +#define HAL_REO_UPD_RX_QUEUE_INFO0_UPD_PN BIT(30) + +#define HAL_REO_UPD_RX_QUEUE_INFO1_RX_QUEUE_NUMBER GENMASK(15, 0) +#define HAL_REO_UPD_RX_QUEUE_INFO1_VLD BIT(16) +#define HAL_REO_UPD_RX_QUEUE_INFO1_ASSOC_LNK_DESC_COUNTER GENMASK(18, 17) +#define HAL_REO_UPD_RX_QUEUE_INFO1_DIS_DUP_DETECTION BIT(19) +#define HAL_REO_UPD_RX_QUEUE_INFO1_SOFT_REORDER_EN BIT(20) +#define HAL_REO_UPD_RX_QUEUE_INFO1_AC GENMASK(22, 21) +#define HAL_REO_UPD_RX_QUEUE_INFO1_BAR BIT(23) +#define HAL_REO_UPD_RX_QUEUE_INFO1_RETRY BIT(24) +#define HAL_REO_UPD_RX_QUEUE_INFO1_CHECK_2K_MODE BIT(25) +#define HAL_REO_UPD_RX_QUEUE_INFO1_OOR_MODE BIT(26) +#define HAL_REO_UPD_RX_QUEUE_INFO1_PN_CHECK BIT(27) +#define HAL_REO_UPD_RX_QUEUE_INFO1_EVEN_PN BIT(28) +#define HAL_REO_UPD_RX_QUEUE_INFO1_UNEVEN_PN BIT(29) +#define HAL_REO_UPD_RX_QUEUE_INFO1_PN_HANDLE_ENABLE BIT(30) +#define HAL_REO_UPD_RX_QUEUE_INFO1_IGNORE_AMPDU_FLG BIT(31) + +#define HAL_REO_UPD_RX_QUEUE_INFO2_BA_WINDOW_SIZE GENMASK(7, 0) +#define HAL_REO_UPD_RX_QUEUE_INFO2_PN_SIZE GENMASK(9, 8) +#define HAL_REO_UPD_RX_QUEUE_INFO2_SVLD BIT(10) +#define HAL_REO_UPD_RX_QUEUE_INFO2_SSN GENMASK(22, 11) +#define HAL_REO_UPD_RX_QUEUE_INFO2_SEQ_2K_ERR BIT(23) +#define HAL_REO_UPD_RX_QUEUE_INFO2_PN_ERR BIT(24) +#define HAL_REO_UPD_RX_QUEUE_INFO2_PN_VALID BIT(25) + +struct hal_reo_update_rx_queue { + struct hal_reo_cmd_hdr cmd; + u32 queue_addr_lo; + u32 info0; + u32 info1; + u32 info2; + u32 pn[4]; +} __packed; + +#define HAL_REO_UNBLOCK_CACHE_INFO0_UNBLK_CACHE BIT(0) +#define HAL_REO_UNBLOCK_CACHE_INFO0_RESOURCE_IDX GENMASK(2, 1) + +struct hal_reo_unblock_cache { + struct hal_reo_cmd_hdr cmd; + u32 info0; + u32 rsvd[7]; +} __packed; + +enum hal_reo_exec_status { + HAL_REO_EXEC_STATUS_SUCCESS, + HAL_REO_EXEC_STATUS_BLOCKED, + HAL_REO_EXEC_STATUS_FAILED, + HAL_REO_EXEC_STATUS_RESOURCE_BLOCKED, +}; + +#define HAL_REO_STATUS_HDR_INFO0_STATUS_NUM GENMASK(15, 0) +#define HAL_REO_STATUS_HDR_INFO0_EXEC_TIME GENMASK(25, 16) +#define HAL_REO_STATUS_HDR_INFO0_EXEC_STATUS GENMASK(27, 26) + +struct hal_reo_status_hdr { + u32 info0; + u32 timestamp; +} __packed; + +/* hal_reo_status_hdr + * Producer: REO + * Consumer: SW + * + * status_num + * The value in this field is equal to value of the reo command + * number. This field helps to correlate the statuses with the REO + * commands. + * + * execution_time (in us) + * The amount of time REO took to excecute the command. Note that + * this time does not include the duration of the command waiting + * in the command ring, before the execution started. + * + * execution_status + * Execution status of the command. Values are defined in + * enum %HAL_REO_EXEC_STATUS_. + */ +#define HAL_REO_GET_QUEUE_STATS_STATUS_INFO0_SSN GENMASK(11, 0) +#define HAL_REO_GET_QUEUE_STATS_STATUS_INFO0_CUR_IDX GENMASK(19, 12) + +#define HAL_REO_GET_QUEUE_STATS_STATUS_INFO1_MPDU_COUNT GENMASK(6, 0) +#define HAL_REO_GET_QUEUE_STATS_STATUS_INFO1_MSDU_COUNT GENMASK(31, 7) + +#define HAL_REO_GET_QUEUE_STATS_STATUS_INFO2_TIMEOUT_COUNT GENMASK(9, 4) +#define HAL_REO_GET_QUEUE_STATS_STATUS_INFO2_FDTB_COUNT GENMASK(15, 10) +#define HAL_REO_GET_QUEUE_STATS_STATUS_INFO2_DUPLICATE_COUNT GENMASK(31, 16) + +#define HAL_REO_GET_QUEUE_STATS_STATUS_INFO3_FIO_COUNT GENMASK(23, 0) +#define HAL_REO_GET_QUEUE_STATS_STATUS_INFO3_BAR_RCVD_CNT GENMASK(31, 24) + +#define HAL_REO_GET_QUEUE_STATS_STATUS_INFO4_LATE_RX_MPDU GENMASK(11, 0) +#define HAL_REO_GET_QUEUE_STATS_STATUS_INFO4_WINDOW_JMP2K GENMASK(15, 12) +#define HAL_REO_GET_QUEUE_STATS_STATUS_INFO4_HOLE_COUNT GENMASK(31, 16) + +#define HAL_REO_GET_QUEUE_STATS_STATUS_INFO5_LOOPING_CNT GENMASK(31, 28) + +struct hal_reo_get_queue_stats_status { + struct hal_reo_status_hdr hdr; + u32 info0; + u32 pn[4]; + u32 last_rx_enqueue_timestamp; + u32 last_rx_dequeue_timestamp; + u32 rx_bitmap[8]; + u32 info1; + u32 info2; + u32 info3; + u32 num_mpdu_frames; + u32 num_msdu_frames; + u32 total_bytes; + u32 info4; + u32 info5; +} __packed; + +/* hal_reo_get_queue_stats_status + * Producer: REO + * Consumer: SW + * + * status_hdr + * Details that can link this status with the original command. It + * also contains info on how long REO took to execute this command. + * + * ssn + * Starting Sequence number of the session, this changes whenever + * window moves (can be filled by SW then maintained by REO). + * + * current_index + * Points to last forwarded packet. + * + * pn + * Bits of the PN number. + * + * last_rx_enqueue_timestamp + * last_rx_dequeue_timestamp + * Timestamp of arrival of the last MPDU for this queue and + * Timestamp of forwarding an MPDU accordingly. + * + * rx_bitmap + * When a bit is set, the corresponding frame is currently held + * in the re-order queue. The bitmap is Fully managed by HW. + * + * current_mpdu_count + * current_msdu_count + * The number of MPDUs and MSDUs in the queue. + * + * timeout_count + * The number of times REO started forwarding frames even though + * there is a hole in the bitmap. Forwarding reason is timeout. + * + * forward_due_to_bar_count + * The number of times REO started forwarding frames even though + * there is a hole in the bitmap. Fwd reason is reception of BAR. + * + * duplicate_count + * The number of duplicate frames that have been detected. + * + * frames_in_order_count + * The number of frames that have been received in order (without + * a hole that prevented them from being forwarded immediately). + * + * bar_received_count + * The number of times a BAR frame is received. + * + * mpdu_frames_processed_count + * msdu_frames_processed_count + * The total number of MPDU/MSDU frames that have been processed. + * + * total_bytes + * An approximation of the number of bytes received for this queue. + * + * late_receive_mpdu_count + * The number of MPDUs received after the window had already moved + * on. The 'late' sequence window is defined as + * (Window SSN - 256) - (Window SSN - 1). + * + * window_jump_2k + * The number of times the window moved more than 2K + * + * hole_count + * The number of times a hole was created in the receive bitmap. + * + * looping_count + * A count value that indicates the number of times the producer of + * entries into this Ring has looped around the ring. + */ + +#define HAL_REO_STATUS_LOOP_CNT GENMASK(31, 28) + +#define HAL_REO_FLUSH_QUEUE_INFO0_ERR_DETECTED BIT(0) +#define HAL_REO_FLUSH_QUEUE_INFO0_RSVD GENMASK(31, 1) +#define HAL_REO_FLUSH_QUEUE_INFO1_RSVD GENMASK(27, 0) + +struct hal_reo_flush_queue_status { + struct hal_reo_status_hdr hdr; + u32 info0; + u32 rsvd0[21]; + u32 info1; +} __packed; + +/* hal_reo_flush_queue_status + * Producer: REO + * Consumer: SW + * + * status_hdr + * Details that can link this status with the original command. It + * also contains info on how long REO took to execute this command. + * + * error_detected + * Status of blocking resource + * + * 0 - No error has been detected while executing this command + * 1 - Error detected. The resource to be used for blocking was + * already in use. + * + * looping_count + * A count value that indicates the number of times the producer of + * entries into this Ring has looped around the ring. + */ + +#define HAL_REO_FLUSH_CACHE_STATUS_INFO0_IS_ERR BIT(0) +#define HAL_REO_FLUSH_CACHE_STATUS_INFO0_BLOCK_ERR_CODE GENMASK(2, 1) +#define HAL_REO_FLUSH_CACHE_STATUS_INFO0_FLUSH_STATUS_HIT BIT(8) +#define HAL_REO_FLUSH_CACHE_STATUS_INFO0_FLUSH_DESC_TYPE GENMASK(11, 9) +#define HAL_REO_FLUSH_CACHE_STATUS_INFO0_FLUSH_CLIENT_ID GENMASK(15, 12) +#define HAL_REO_FLUSH_CACHE_STATUS_INFO0_FLUSH_ERR GENMASK(17, 16) +#define HAL_REO_FLUSH_CACHE_STATUS_INFO0_FLUSH_COUNT GENMASK(25, 18) + +struct hal_reo_flush_cache_status { + struct hal_reo_status_hdr hdr; + u32 info0; + u32 rsvd0[21]; + u32 info1; +} __packed; + +/* hal_reo_flush_cache_status + * Producer: REO + * Consumer: SW + * + * status_hdr + * Details that can link this status with the original command. It + * also contains info on how long REO took to execute this command. + * + * error_detected + * Status for blocking resource handling + * + * 0 - No error has been detected while executing this command + * 1 - An error in the blocking resource management was detected + * + * block_error_details + * only valid when error_detected is set + * + * 0 - No blocking related errors found + * 1 - Blocking resource is already in use + * 2 - Resource requested to be unblocked, was not blocked + * + * cache_controller_flush_status_hit + * The status that the cache controller returned on executing the + * flush command. + * + * 0 - miss; 1 - hit + * + * cache_controller_flush_status_desc_type + * Flush descriptor type + * + * cache_controller_flush_status_client_id + * Module who made the flush request + * + * In REO, this is always 0 + * + * cache_controller_flush_status_error + * Error condition + * + * 0 - No error found + * 1 - HW interface is still busy + * 2 - Line currently locked. Used for one line flush command + * 3 - At least one line is still locked. + * Used for cache flush command. + * + * cache_controller_flush_count + * The number of lines that were actually flushed out + * + * looping_count + * A count value that indicates the number of times the producer of + * entries into this Ring has looped around the ring. + */ + +#define HAL_REO_UNBLOCK_CACHE_STATUS_INFO0_IS_ERR BIT(0) +#define HAL_REO_UNBLOCK_CACHE_STATUS_INFO0_TYPE BIT(1) + +struct hal_reo_unblock_cache_status { + struct hal_reo_status_hdr hdr; + u32 info0; + u32 rsvd0[21]; + u32 info1; +} __packed; + +/* hal_reo_unblock_cache_status + * Producer: REO + * Consumer: SW + * + * status_hdr + * Details that can link this status with the original command. It + * also contains info on how long REO took to execute this command. + * + * error_detected + * 0 - No error has been detected while executing this command + * 1 - The blocking resource was not in use, and therefore it could + * not be unblocked. + * + * unblock_type + * Reference to the type of unblock command + * 0 - Unblock a blocking resource + * 1 - The entire cache usage is unblock + * + * looping_count + * A count value that indicates the number of times the producer of + * entries into this Ring has looped around the ring. + */ + +#define HAL_REO_FLUSH_TIMEOUT_STATUS_INFO0_IS_ERR BIT(0) +#define HAL_REO_FLUSH_TIMEOUT_STATUS_INFO0_LIST_EMPTY BIT(1) + +#define HAL_REO_FLUSH_TIMEOUT_STATUS_INFO1_REL_DESC_COUNT GENMASK(15, 0) +#define HAL_REO_FLUSH_TIMEOUT_STATUS_INFO1_FWD_BUF_COUNT GENMASK(31, 16) + +struct hal_reo_flush_timeout_list_status { + struct hal_reo_status_hdr hdr; + u32 info0; + u32 info1; + u32 rsvd0[20]; + u32 info2; +} __packed; + +/* hal_reo_flush_timeout_list_status + * Producer: REO + * Consumer: SW + * + * status_hdr + * Details that can link this status with the original command. It + * also contains info on how long REO took to execute this command. + * + * error_detected + * 0 - No error has been detected while executing this command + * 1 - Command not properly executed and returned with error + * + * timeout_list_empty + * When set, REO has depleted the timeout list and all entries are + * gone. + * + * release_desc_count + * Producer: SW; Consumer: REO + * The number of link descriptor released + * + * forward_buf_count + * Producer: SW; Consumer: REO + * The number of buffers forwarded to the REO destination rings + * + * looping_count + * A count value that indicates the number of times the producer of + * entries into this Ring has looped around the ring. + */ + +#define HAL_REO_DESC_THRESH_STATUS_INFO0_THRESH_INDEX GENMASK(1, 0) +#define HAL_REO_DESC_THRESH_STATUS_INFO1_LINK_DESC_COUNTER0 GENMASK(23, 0) +#define HAL_REO_DESC_THRESH_STATUS_INFO2_LINK_DESC_COUNTER1 GENMASK(23, 0) +#define HAL_REO_DESC_THRESH_STATUS_INFO3_LINK_DESC_COUNTER2 GENMASK(23, 0) +#define HAL_REO_DESC_THRESH_STATUS_INFO4_LINK_DESC_COUNTER_SUM GENMASK(23, 0) + +struct hal_reo_desc_thresh_reached_status { + struct hal_reo_status_hdr hdr; + u32 info0; + u32 info1; + u32 info2; + u32 info3; + u32 info4; + u32 rsvd0[17]; + u32 info5; +} __packed; + +/* hal_reo_desc_thresh_reached_status + * Producer: REO + * Consumer: SW + * + * status_hdr + * Details that can link this status with the original command. It + * also contains info on how long REO took to execute this command. + * + * threshold_index + * The index of the threshold register whose value got reached + * + * link_descriptor_counter0 + * link_descriptor_counter1 + * link_descriptor_counter2 + * link_descriptor_counter_sum + * Value of the respective counters at generation of this message + * + * looping_count + * A count value that indicates the number of times the producer of + * entries into this Ring has looped around the ring. + */ + +#endif /* ATH11K_HAL_DESC_H */