Received-SPF: pass (google.com: best guess record for domain of linux-wireless-owner@vger.kernel.org designates 209.132.180.67 as permitted sender) client-ip=209.132.180.67;
Authenticated-By: 
From:   <yhchuang@realtek.com>
To:     <kvalo@codeaurora.org>
CC:     <linux-wireless@vger.kernel.org>, <briannorris@chromium.org>
Subject: [PATCH] rtw88: 8822c: config RF table path B before path A
Date:   Wed, 18 Mar 2020 17:52:24 +0800
Message-ID: <20200318095224.12940-1-yhchuang@realtek.com>
MIME-Version: 1.0
Content-Type: text/plain
Sender: linux-wireless-owner@vger.kernel.org
Precedence: bulk

From: Yan-Hsuan Chuang <yhchuang@realtek.com>

After MAC switched power, the hardware's RF registers will have
its default value, but the default value for path B is incorrect.
So, load RF path B first, to decrease the period between MAC on
and RF path B config.

By test, if we load path A first, then there's ~300ms that the
path B is incorrect, it could lead to BT coex's A2DP glitch.
But if we configure path B first, there will only have ~3ms,
significantly lower possibility to have A2DP sound glitch.

Signed-off-by: Yan-Hsuan Chuang <yhchuang@realtek.com>
---
 drivers/net/wireless/realtek/rtw88/rtw8822c.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/wireless/realtek/rtw88/rtw8822c.c b/drivers/net/wireless/realtek/rtw88/rtw8822c.c
index 146f693c7592..d2469f91976b 100644
--- a/drivers/net/wireless/realtek/rtw88/rtw8822c.c
+++ b/drivers/net/wireless/realtek/rtw88/rtw8822c.c
@@ -4128,7 +4128,7 @@ struct rtw_chip_info rtw8822c_hw_spec = {
 	.agc_tbl = &rtw8822c_agc_tbl,
 	.bb_tbl = &rtw8822c_bb_tbl,
 	.rfk_init_tbl = &rtw8822c_array_mp_cal_init_tbl,
-	.rf_tbl = {&rtw8822c_rf_a_tbl, &rtw8822c_rf_b_tbl},
+	.rf_tbl = {&rtw8822c_rf_b_tbl, &rtw8822c_rf_a_tbl},
 	.rfe_defs = rtw8822c_rfe_defs,
 	.rfe_defs_size = ARRAY_SIZE(rtw8822c_rfe_defs),
 	.en_dis_dpd = true,
-- 
2.17.1