Received-SPF: pass (google.com: domain of linux-wireless-owner@vger.kernel.org designates 23.128.96.18 as permitted sender) client-ip=23.128.96.18;
From:   Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
To:     Raz Bouganim <r-bouganim@ti.com>
Cc:     linuxarm@huawei.com, mauro.chehab@huawei.com,
        Mauro Carvalho Chehab <mchehab+huawei@kernel.org>,
        John Stultz <john.stultz@linaro.org>,
        Manivannan Sadhasivam <mani@kernel.org>,
        Kalle Valo <kvalo@codeaurora.org>,
        "David S. Miller" <davem@davemloft.net>,
        Jakub Kicinski <kuba@kernel.org>,
        Tony Lindgren <tony@atomide.com>,
        Dinghao Liu <dinghao.liu@zju.edu.cn>, Guy Mishol <guym@ti.com>,
        Maital Hahn <maitalm@ti.com>,
        Johannes Berg <johannes.berg@intel.com>,
        Fuqian Huang <huangfq.daxian@gmail.com>,
        linux-wireless@vger.kernel.org, netdev@vger.kernel.org,
        linux-kernel@vger.kernel.org
Subject: [PATCH v2] net: wireless: wlcore: fix support for IGTK key
Date:   Mon,  7 Sep 2020 08:37:52 +0200
Message-Id: <bbffd27164e3c06636c57cba1550f34664ab5d4c.1599460469.git.mchehab+huawei@kernel.org>
In-Reply-To: <49d4cdaf6aad40f591e8b2f17e09007c@ti.com>
References: <49d4cdaf6aad40f591e8b2f17e09007c@ti.com>
MIME-Version: 1.0
Content-Transfer-Encoding: 8bit
Sender: linux-wireless-owner@vger.kernel.org
Precedence: bulk

Changeset 2b7aadd3b9e1 ("wlcore: Adding suppoprt for IGTK key in wlcore driver")
added support for AEC CMAC cipher suite.

However, this only works with the very newest firmware version
(8.9.0.0.83). Such firmware weren't even pushed to linux-firmware
git tree yet:

	https://git.ti.com/cgit/wilink8-wlan/wl18xx_fw/log/

Due to that, it causes a regression betwen Kernel 5.7 and 5.8:
with such patch applied, WiFi stops working, and the Kernel starts
printing this message every second:

   wlcore: PHY firmware version: Rev 8.2.0.0.242
   wlcore: firmware booted (Rev 8.9.0.0.79)
   wlcore: ERROR command execute failure 14
   ------------[ cut here ]------------
   WARNING: CPU: 0 PID: 133 at drivers/net/wireless/ti/wlcore/main.c:795 wl12xx_queue_recovery_work.part.0+0x6c/0x74 [wlcore]
   Modules linked in: wl18xx wlcore mac80211 libarc4 cfg80211 rfkill snd_soc_hdmi_codec crct10dif_ce wlcore_sdio adv7511 cec kirin9xx_drm(C) kirin9xx_dw_drm_dsi(C) drm_kms_helper drm ip_tables x_tables ipv6 nf_defrag_ipv6
   CPU: 0 PID: 133 Comm: kworker/0:1 Tainted: G        WC        5.8.0+ #186
   Hardware name: HiKey970 (DT)
   Workqueue: events_freezable ieee80211_restart_work [mac80211]
   pstate: 60000005 (nZCv daif -PAN -UAO BTYPE=--)
   pc : wl12xx_queue_recovery_work.part.0+0x6c/0x74 [wlcore]
   lr : wl12xx_queue_recovery_work+0x24/0x30 [wlcore]
   sp : ffff8000126c3a60
   x29: ffff8000126c3a60 x28: 00000000000025de
   x27: 0000000000000010 x26: 0000000000000005
   x25: ffff0001a5d49e80 x24: ffff8000092cf580
   x23: ffff0001b7c12623 x22: ffff0001b6fcf2e8
   x21: ffff0001b7e46200 x20: 00000000fffffffb
   x19: ffff0001a78e6400 x18: 0000000000000030
   x17: 0000000000000001 x16: 0000000000000001
   x15: ffff0001b7e46670 x14: ffffffffffffffff
   x13: ffff8000926c37d7 x12: ffff8000126c37e0
   x11: ffff800011e01000 x10: ffff8000120526d0
   x9 : 0000000000000000 x8 : 3431206572756c69
   x7 : 6166206574756365 x6 : 0000000000000c2c
   x5 : 0000000000000000 x4 : ffff0001bf1361e8
   x3 : ffff0001bf1790b0 x2 : 0000000000000000
   x1 : ffff0001a5d49e80 x0 : 0000000000000001
   Call trace:
    wl12xx_queue_recovery_work.part.0+0x6c/0x74 [wlcore]
    wl12xx_queue_recovery_work+0x24/0x30 [wlcore]
    wl1271_cmd_set_sta_key+0x258/0x25c [wlcore]
    wl1271_set_key+0x7c/0x2dc [wlcore]
    wlcore_set_key+0xe4/0x360 [wlcore]
    wl18xx_set_key+0x48/0x1d0 [wl18xx]
    wlcore_op_set_key+0xa4/0x180 [wlcore]
    ieee80211_key_enable_hw_accel+0xb0/0x2d0 [mac80211]
    ieee80211_reenable_keys+0x70/0x110 [mac80211]
    ieee80211_reconfig+0xa00/0xca0 [mac80211]
    ieee80211_restart_work+0xc4/0xfc [mac80211]
    process_one_work+0x1cc/0x350
    worker_thread+0x13c/0x470
    kthread+0x154/0x160
    ret_from_fork+0x10/0x30
   ---[ end trace b1f722abf9af5919 ]---
   wlcore: WARNING could not set keys
   wlcore: ERROR Could not add or replace key
   wlan0: failed to set key (4, ff:ff:ff:ff:ff:ff) to hardware (-5)
   wlcore: Hardware recovery in progress. FW ver: Rev 8.9.0.0.79
   wlcore: pc: 0x0, hint_sts: 0x00000040 count: 39
   wlcore: down
   wlcore: down
   ieee80211 phy0: Hardware restart was requested
   mmc_host mmc0: Bus speed (slot 0) = 400000Hz (slot req 400000Hz, actual 400000HZ div = 0)
   mmc_host mmc0: Bus speed (slot 0) = 25000000Hz (slot req 25000000Hz, actual 25000000HZ div = 0)
   wlcore: PHY firmware version: Rev 8.2.0.0.242
   wlcore: firmware booted (Rev 8.9.0.0.79)
   wlcore: ERROR command execute failure 14
   ------------[ cut here ]------------

Fix it by adding some code that will check if the firmware version
is at least version 8.9.0.0.83.

Tested on Hikey 970.

Fixes: 2b7aadd3b9e1 ("wlcore: Adding suppoprt for IGTK key in wlcore driver")
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
---

Hi Raz,

Maybe this patch could be useful once firmware 8.9.0.0.83 is released.

v2: change it to require minimal verson 8.9.0.0.83 for IGTK key

 drivers/net/wireless/ti/wlcore/main.c   | 48 +++++++++++++++++++++++++
 drivers/net/wireless/ti/wlcore/wlcore.h |  2 ++
 2 files changed, 50 insertions(+)

diff --git a/drivers/net/wireless/ti/wlcore/main.c b/drivers/net/wireless/ti/wlcore/main.c
index de6c8a7589ca..4332eaa1a733 100644
--- a/drivers/net/wireless/ti/wlcore/main.c
+++ b/drivers/net/wireless/ti/wlcore/main.c
@@ -14,6 +14,7 @@
 #include <linux/irq.h>
 #include <linux/pm_runtime.h>
 #include <linux/pm_wakeirq.h>
+#include <linux/ctype.h>
 
 #include "wlcore.h"
 #include "debug.h"
@@ -1082,6 +1083,45 @@ static int wl12xx_chip_wakeup(struct wl1271 *wl, bool plt)
 	return ret;
 }
 
+static bool wl1271_check_aes_cmac_cypher(struct wl1271 *wl)
+{
+	int ver[5] = { };
+	int ret;
+	const char *p = wl->chip.fw_ver_str;
+
+
+	/* The string starts with "Rev ". Ignore it */
+	while (*p && !isdigit(*p))
+		p++;
+
+	ret = sscanf(p, "%d.%d.%d.%d.%d",
+		     &ver[0], &ver[1], &ver[2], &ver[3], &ver[4]);
+
+	if (ret != ARRAY_SIZE(ver)) {
+		wl1271_info("Parsed version: %d.%d.%d.%d.%d\n",
+			    ver[0], ver[1], ver[2], ver[3], ver[4]);
+		wl1271_error("Couldn't parse firmware version string: %d\n", ret);
+		return false;
+	}
+
+	/*
+	 * Only versions equal (and probably above) 8.9.0.0.83
+	 * supports such feature.
+	 */
+	if (ver[0] < 8)
+		return false;
+	if (ver[1] < 9)
+		return false;
+	if (ver[2] > 0)
+		return true;
+	if (ver[3] > 0)
+		return true;
+	if (ver[4] >= 83)
+		return true;
+
+	return false;
+}
+
 int wl1271_plt_start(struct wl1271 *wl, const enum plt_mode plt_mode)
 {
 	int retries = WL1271_BOOT_RETRIES;
@@ -1133,6 +1173,8 @@ int wl1271_plt_start(struct wl1271 *wl, const enum plt_mode plt_mode)
 		strncpy(wiphy->fw_version, wl->chip.fw_ver_str,
 			sizeof(wiphy->fw_version));
 
+		wl->has_aes_cmac_cipher = wl1271_check_aes_cmac_cypher(wl);
+
 		goto out;
 
 power_off:
@@ -2358,6 +2400,8 @@ static int wl12xx_init_fw(struct wl1271 *wl)
 	strncpy(wiphy->fw_version, wl->chip.fw_ver_str,
 		sizeof(wiphy->fw_version));
 
+	wl->has_aes_cmac_cipher = wl1271_check_aes_cmac_cypher(wl);
+
 	/*
 	 * Now we know if 11a is supported (info from the NVS), so disable
 	 * 11a channels if not supported
@@ -3551,6 +3595,10 @@ int wlcore_set_key(struct wl1271 *wl, enum set_key_cmd cmd,
 		key_type = KEY_GEM;
 		break;
 	case WLAN_CIPHER_SUITE_AES_CMAC:
+		if (!wl->has_aes_cmac_cipher) {
+			wl1271_error("AEC CMAC cipher not available on this firmware version\n");
+			return -EOPNOTSUPP;
+		}
 		key_type = KEY_IGTK;
 		break;
 	default:
diff --git a/drivers/net/wireless/ti/wlcore/wlcore.h b/drivers/net/wireless/ti/wlcore/wlcore.h
index b7821311ac75..26a2bd9b2df1 100644
--- a/drivers/net/wireless/ti/wlcore/wlcore.h
+++ b/drivers/net/wireless/ti/wlcore/wlcore.h
@@ -213,6 +213,8 @@ struct wl1271 {
 	void *nvs;
 	size_t nvs_len;
 
+	u32 has_aes_cmac_cipher:1;
+
 	s8 hw_pg_ver;
 
 	/* address read from the fuse ROM */
-- 
2.26.2