Received-SPF: pass (google.com: domain of linux-wireless-owner@vger.kernel.org designates 23.128.96.18 as permitted sender) client-ip=23.128.96.18;
Date:   Mon, 19 Oct 2020 16:18:50 -0500
From:   Rob Herring <robh@kernel.org>
To:     Sven Eckelmann <sven@narfation.org>
Cc:     Kalle Valo <kvalo@codeaurora.org>, linux-wireless@vger.kernel.org,
        ath11k@lists.infradead.org, Rob Herring <robh+dt@kernel.org>,
        devicetree@vger.kernel.org
Subject: Re: [PATCH 1/2] dt: bindings: add new dt entry for ath11k
 calibration variant
Message-ID: <20201019211850.GA3619287@bogus>
References: <20201015131501.1939685-1-sven@narfation.org>
MIME-Version: 1.0
Content-Type: text/plain; charset=us-ascii
Content-Disposition: inline
In-Reply-To: <20201015131501.1939685-1-sven@narfation.org>
Precedence: bulk

On Thu, 15 Oct 2020 15:15:00 +0200, Sven Eckelmann wrote:
> The bus + qmi-chip-id + qmi-board-id is not enough to identify the correct
> board data file on IPQ6018 based devices. Multiple different boards share
> the same values. Only the original reference designs can currently be
> identified and loaded from the board-2.bin. But these will not result in
> the correct calibration data when combined with the pre-calibration data
> from the device.
> 
> An additional "variant" information has to be provided to select the
> correct board data for a design which was modified by an ODM. This follows
> the same approach as ath10k.
> 
> Signed-off-by: Sven Eckelmann <sven@narfation.org>
> ---
>  .../devicetree/bindings/net/wireless/qcom,ath11k.yaml       | 6 ++++++
>  1 file changed, 6 insertions(+)
> 

Reviewed-by: Rob Herring <robh@kernel.org>