Received-SPF: pass (google.com: domain of linux-wireless-owner@vger.kernel.org designates 23.128.96.18 as permitted sender) client-ip=23.128.96.18;
From:   Tsuchiya Yuto <kitakar@gmail.com>
To:     Amitkumar Karwar <amitkarwar@gmail.com>,
        Ganapathi Bhat <ganapathi.bhat@nxp.com>,
        Xinming Hu <huxinming820@gmail.com>,
        Kalle Valo <kvalo@codeaurora.org>,
        "David S. Miller" <davem@davemloft.net>,
        Jakub Kicinski <kuba@kernel.org>
Cc:     linux-wireless@vger.kernel.org, netdev@vger.kernel.org,
        linux-kernel@vger.kernel.org,
        Maximilian Luz <luzmaximilian@gmail.com>,
        Andy Shevchenko <andriy.shevchenko@intel.com>, verdre@v0yd.nl,
        Tsuchiya Yuto <kitakar@gmail.com>
Subject: [PATCH 0/3] mwifiex: disable ps_mode by default for stability
Date:   Wed, 28 Oct 2020 23:24:30 +0900
Message-Id: <20201028142433.18501-1-kitakar@gmail.com>
MIME-Version: 1.0
Content-Transfer-Encoding: 8bit
Precedence: bulk

Hello all,

On Microsoft Surface devices (PCIe-88W8897), we are observing stability
issues when ps_mode (IEEE power_save) is enabled, then eventually causes
firmware crash. Especially on 5GHz APs, the connection is completely
unstable and almost unusable.

I think the most desirable change is to fix the ps_mode itself. But is
seems to be hard work [1], I'm afraid we have to go this way.

Therefore, the first patch of this series disables the ps_mode by default
instead of enabling it on driver init. I'm not sure if explicitly
disabling it is really required or not. I don't have access to the details
of this chip. Let me know if it's enough to just remove the code that
enables ps_mode.

The Second patch adds a new module parameter named "allow_ps_mode". Since
other wifi drivers just disable power_save by default by module parameter
like this, I also added this.

The third patch adds a message when ps_mode will be changed. Useful when
diagnosing connection issues.

Thanks,
Tsuchiya Yuto

[1] https://bugzilla.kernel.org/show_bug.cgi?id=109681

Tsuchiya Yuto (3):
  mwifiex: disable ps_mode explicitly by default instead
  mwifiex: add allow_ps_mode module parameter
  mwifiex: print message when changing ps_mode

 .../net/wireless/marvell/mwifiex/cfg80211.c   | 23 +++++++++++++++++++
 .../net/wireless/marvell/mwifiex/sta_cmd.c    | 11 ++++++---
 2 files changed, 31 insertions(+), 3 deletions(-)

-- 
2.29.1