Received-SPF: pass (google.com: domain of linux-wireless-owner@vger.kernel.org designates 23.128.96.18 as permitted sender) client-ip=23.128.96.18;
From:   =?UTF-8?q?Jonas=20Dre=C3=9Fler?= <verdre@v0yd.nl>
To:     Amitkumar Karwar <amitkarwar@gmail.com>,
        Ganapathi Bhat <ganapathi017@gmail.com>,
        Sharvari Harisangam <sharvari.harisangam@nxp.com>,
        Xinming Hu <huxinming820@gmail.com>,
        Kalle Valo <kvalo@codeaurora.org>,
        "David S. Miller" <davem@davemloft.net>,
        Jakub Kicinski <kuba@kernel.org>
Cc:     =?UTF-8?q?Jonas=20Dre=C3=9Fler?= <verdre@v0yd.nl>,
        Tsuchiya Yuto <kitakar@gmail.com>,
        linux-wireless@vger.kernel.org, netdev@vger.kernel.org,
        linux-kernel@vger.kernel.org, linux-pci@vger.kernel.org,
        Maximilian Luz <luzmaximilian@gmail.com>,
        Andy Shevchenko <andriy.shevchenko@linux.intel.com>,
        Bjorn Helgaas <bhelgaas@google.com>,
        =?UTF-8?q?Pali=20Roh=C3=A1r?= <pali@kernel.org>
Subject: [RFC PATCH 2/3] mwifiex: pcie: add reset_d3cold quirk for Surface gen4+ devices
Date:   Sat, 22 May 2021 15:18:26 +0200
Message-Id: <20210522131827.67551-3-verdre@v0yd.nl>
In-Reply-To: <20210522131827.67551-1-verdre@v0yd.nl>
References: <20210522131827.67551-1-verdre@v0yd.nl>
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit
Precedence: bulk

From: Tsuchiya Yuto <kitakar@gmail.com>

To reset mwifiex on Surface gen4+ (Pro 4 or later gen) devices, it
seems that putting the wifi device into D3cold is required according
to errata.inf file on Windows installation (Windows/INF/errata.inf).

This patch adds a function that performs power-cycle (put into D3cold
then D0) and call the function at the end of reset_prepare().

Note: Need to also reset the parent device (bridge) of wifi on SB1;
it might be because the bridge of wifi always reports it's in D3hot.
When I tried to reset only the wifi device (not touching parent), it gave
the following error and the reset failed:

    acpi device:4b: Cannot transition to power state D0 for parent in D3hot
    mwifiex_pcie 0000:03:00.0: can't change power state from D3cold to D0 (config space inaccessible)

Signed-off-by: Tsuchiya Yuto <kitakar@gmail.com>
Signed-off-by: Jonas Dreßler <verdre@v0yd.nl>
---
 drivers/net/wireless/marvell/mwifiex/pcie.c   |   7 +
 .../wireless/marvell/mwifiex/pcie_quirks.c    | 123 ++++++++++++++++++
 .../wireless/marvell/mwifiex/pcie_quirks.h    |   3 +
 3 files changed, 133 insertions(+)

diff --git a/drivers/net/wireless/marvell/mwifiex/pcie.c b/drivers/net/wireless/marvell/mwifiex/pcie.c
index 02fdce926de5..d9acfea395ad 100644
--- a/drivers/net/wireless/marvell/mwifiex/pcie.c
+++ b/drivers/net/wireless/marvell/mwifiex/pcie.c
@@ -528,6 +528,13 @@ static void mwifiex_pcie_reset_prepare(struct pci_dev *pdev)
 	mwifiex_shutdown_sw(adapter);
 	clear_bit(MWIFIEX_IFACE_WORK_DEVICE_DUMP, &card->work_flags);
 	clear_bit(MWIFIEX_IFACE_WORK_CARD_RESET, &card->work_flags);
+
+	/* For Surface gen4+ devices, we need to put wifi into D3cold right
+	 * before performing FLR
+	 */
+	if (card->quirks & QUIRK_FW_RST_D3COLD)
+		mwifiex_pcie_reset_d3cold_quirk(pdev);
+
 	mwifiex_dbg(adapter, INFO, "%s, successful\n", __func__);
 
 	card->pci_reset_ongoing = true;
diff --git a/drivers/net/wireless/marvell/mwifiex/pcie_quirks.c b/drivers/net/wireless/marvell/mwifiex/pcie_quirks.c
index 4064f99b36ba..b5f214fc1212 100644
--- a/drivers/net/wireless/marvell/mwifiex/pcie_quirks.c
+++ b/drivers/net/wireless/marvell/mwifiex/pcie_quirks.c
@@ -15,6 +15,72 @@
 
 /* quirk table based on DMI matching */
 static const struct dmi_system_id mwifiex_quirk_table[] = {
+	{
+		.ident = "Surface Pro 4",
+		.matches = {
+			DMI_EXACT_MATCH(DMI_SYS_VENDOR, "Microsoft Corporation"),
+			DMI_EXACT_MATCH(DMI_PRODUCT_NAME, "Surface Pro 4"),
+		},
+		.driver_data = (void *)QUIRK_FW_RST_D3COLD,
+	},
+	{
+		.ident = "Surface Pro 5",
+		.matches = {
+			/* match for SKU here due to generic product name "Surface Pro" */
+			DMI_EXACT_MATCH(DMI_SYS_VENDOR, "Microsoft Corporation"),
+			DMI_EXACT_MATCH(DMI_PRODUCT_SKU, "Surface_Pro_1796"),
+		},
+		.driver_data = (void *)QUIRK_FW_RST_D3COLD,
+	},
+	{
+		.ident = "Surface Pro 5 (LTE)",
+		.matches = {
+			/* match for SKU here due to generic product name "Surface Pro" */
+			DMI_EXACT_MATCH(DMI_SYS_VENDOR, "Microsoft Corporation"),
+			DMI_EXACT_MATCH(DMI_PRODUCT_SKU, "Surface_Pro_1807"),
+		},
+		.driver_data = (void *)QUIRK_FW_RST_D3COLD,
+	},
+	{
+		.ident = "Surface Pro 6",
+		.matches = {
+			DMI_EXACT_MATCH(DMI_SYS_VENDOR, "Microsoft Corporation"),
+			DMI_EXACT_MATCH(DMI_PRODUCT_NAME, "Surface Pro 6"),
+		},
+		.driver_data = (void *)QUIRK_FW_RST_D3COLD,
+	},
+	{
+		.ident = "Surface Book 1",
+		.matches = {
+			DMI_EXACT_MATCH(DMI_SYS_VENDOR, "Microsoft Corporation"),
+			DMI_EXACT_MATCH(DMI_PRODUCT_NAME, "Surface Book"),
+		},
+		.driver_data = (void *)QUIRK_FW_RST_D3COLD,
+	},
+	{
+		.ident = "Surface Book 2",
+		.matches = {
+			DMI_EXACT_MATCH(DMI_SYS_VENDOR, "Microsoft Corporation"),
+			DMI_EXACT_MATCH(DMI_PRODUCT_NAME, "Surface Book 2"),
+		},
+		.driver_data = (void *)QUIRK_FW_RST_D3COLD,
+	},
+	{
+		.ident = "Surface Laptop 1",
+		.matches = {
+			DMI_EXACT_MATCH(DMI_SYS_VENDOR, "Microsoft Corporation"),
+			DMI_EXACT_MATCH(DMI_PRODUCT_NAME, "Surface Laptop"),
+		},
+		.driver_data = (void *)QUIRK_FW_RST_D3COLD,
+	},
+	{
+		.ident = "Surface Laptop 2",
+		.matches = {
+			DMI_EXACT_MATCH(DMI_SYS_VENDOR, "Microsoft Corporation"),
+			DMI_EXACT_MATCH(DMI_PRODUCT_NAME, "Surface Laptop 2"),
+		},
+		.driver_data = (void *)QUIRK_FW_RST_D3COLD,
+	},
 	{}
 };
 
@@ -29,4 +95,61 @@ void mwifiex_initialize_quirks(struct pcie_service_card *card)
 
 	if (!card->quirks)
 		dev_info(&pdev->dev, "no quirks enabled\n");
+	if (card->quirks & QUIRK_FW_RST_D3COLD)
+		dev_info(&pdev->dev, "quirk reset_d3cold enabled\n");
+}
+
+static void mwifiex_pcie_set_power_d3cold(struct pci_dev *pdev)
+{
+	dev_info(&pdev->dev, "putting into D3cold...\n");
+
+	pci_save_state(pdev);
+	if (pci_is_enabled(pdev))
+		pci_disable_device(pdev);
+	pci_set_power_state(pdev, PCI_D3cold);
+}
+
+static int mwifiex_pcie_set_power_d0(struct pci_dev *pdev)
+{
+	int ret;
+
+	dev_info(&pdev->dev, "putting into D0...\n");
+
+	pci_set_power_state(pdev, PCI_D0);
+	ret = pci_enable_device(pdev);
+	if (ret) {
+		dev_err(&pdev->dev, "pci_enable_device failed\n");
+		return ret;
+	}
+	pci_restore_state(pdev);
+
+	return 0;
+}
+
+int mwifiex_pcie_reset_d3cold_quirk(struct pci_dev *pdev)
+{
+	struct pci_dev *parent_pdev = pci_upstream_bridge(pdev);
+	int ret;
+
+	/* Power-cycle (put into D3cold then D0) */
+	dev_info(&pdev->dev, "Using reset_d3cold quirk to perform FW reset\n");
+
+	/* We need to perform power-cycle also for bridge of wifi because
+	 * on some devices (e.g. Surface Book 1), the OS for some reasons
+	 * can't know the real power state of the bridge.
+	 * When tried to power-cycle only wifi, the reset failed with the
+	 * following dmesg log:
+	 * "Cannot transition to power state D0 for parent in D3hot".
+	 */
+	mwifiex_pcie_set_power_d3cold(pdev);
+	mwifiex_pcie_set_power_d3cold(parent_pdev);
+
+	ret = mwifiex_pcie_set_power_d0(parent_pdev);
+	if (ret)
+		return ret;
+	ret = mwifiex_pcie_set_power_d0(pdev);
+	if (ret)
+		return ret;
+
+	return 0;
 }
diff --git a/drivers/net/wireless/marvell/mwifiex/pcie_quirks.h b/drivers/net/wireless/marvell/mwifiex/pcie_quirks.h
index 7a1fe3b3a61a..549093067813 100644
--- a/drivers/net/wireless/marvell/mwifiex/pcie_quirks.h
+++ b/drivers/net/wireless/marvell/mwifiex/pcie_quirks.h
@@ -5,4 +5,7 @@
 
 #include "pcie.h"
 
+#define QUIRK_FW_RST_D3COLD	BIT(0)
+
 void mwifiex_initialize_quirks(struct pcie_service_card *card);
+int mwifiex_pcie_reset_d3cold_quirk(struct pci_dev *pdev);
-- 
2.31.1