Received-SPF: pass (google.com: domain of linux-wireless-owner@vger.kernel.org designates 23.128.96.18 as permitted sender) client-ip=23.128.96.18;
Sender: mkenna=codeaurora.org@mg.codeaurora.org
MIME-Version: 1.0
Content-Type: text/plain; charset=US-ASCII;
 format=flowed
Content-Transfer-Encoding: 7bit
Date:   Tue, 08 Jun 2021 20:36:06 +0530
From:   Maharaja Kennadyrajan <mkenna@codeaurora.org>
To:     000ath11k@lists.infradead.org, linux-wireless@vger.kernel.org
Subject: Re: [PATCH v3 0/3] Add support to configure beacon tx mode
In-Reply-To: <1623164643-7803-1-git-send-email-mkenna@codeaurora.org>
References: <1623164643-7803-1-git-send-email-mkenna@codeaurora.org>
Message-ID: <245a4739a2521ecca8a789cea6b662ee@codeaurora.org>
User-Agent: Roundcube Webmail/1.3.9
Precedence: bulk

On 2021-06-08 20:34, Maharaja Kennadyrajan wrote:
> Add support to configure the beacon tx mode as STAGGERED
> or BURST mode via hostapd configuration during the AP
> bring-up or via wpa_suppplicant configuration during MESH
> bring-up.
> 
> Beacons can be sent out in burst(continuously in a single shot
> one after another) or staggered (equally spread out over beacon
> interval) mode.
> 
> V3: Addressed Johnson's comment on v2 patch.
> 
> V2: Addressed Johannes's comment on v1 patch.
> 
> Maharaja Kennadyrajan (3):
>   nl80211: Add support for beacon tx mode
>   mac80211: Add support for beacon tx mode
>   ath11k: Add support for beacon tx mode
> 
>  drivers/net/wireless/ath/ath11k/mac.c | 10 +++++++---
>  include/net/cfg80211.h                |  4 ++++
>  include/net/mac80211.h                |  2 ++
>  include/uapi/linux/nl80211.h          | 16 ++++++++++++++++
>  net/mac80211/cfg.c                    |  2 ++
>  net/wireless/nl80211.c                |  9 +++++++++
>  6 files changed, 40 insertions(+), 3 deletions(-)


[Maha]: Please drop this revision patchset.
I will send the next revision. Sorry for the inconvenience.