Received-SPF: pass (google.com: domain of linux-wireless-owner@vger.kernel.org designates 23.128.96.18 as permitted sender) client-ip=23.128.96.18;
Sender: mkenna=codeaurora.org@mg.codeaurora.org
DMARC-Filter: OpenDMARC Filter v1.3.2 smtp.codeaurora.org 4BAAAC43460
From:   Maharaja Kennadyrajan <mkenna@codeaurora.org>
To:     ath11k@lists.infradead.org, linux-wireless@vger.kernel.org
Cc:     Maharaja Kennadyrajan <mkenna@codeaurora.org>
Subject: [PATCH v4 1/3] nl80211: Add support for beacon tx mode
Date:   Tue,  8 Jun 2021 20:37:33 +0530
Message-Id: <1623164855-15910-2-git-send-email-mkenna@codeaurora.org>
In-Reply-To: <1623164855-15910-1-git-send-email-mkenna@codeaurora.org>
References: <1623164855-15910-1-git-send-email-mkenna@codeaurora.org>
Precedence: bulk

User can configure the below beacon tx mode
1. Staggered mode and 2. Burst mode while bring-up the AP
or MESH.

Beacons can be sent out in burst(continuously in a single shot
one after another) or staggered (equally spread out over beacon
interval) mode.

Set the beacon_tx_mode as 1 for Staggered mode and 2 for
burst mode.

Hence, added the support in the nl80211/cfg80211
layer to honour the beacon tx mode configuration and pass
this value to the driver.

Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.5.0.1-00630-QCAHKSWPL_SILICONZ-2

Signed-off-by: Maharaja Kennadyrajan <mkenna@codeaurora.org>
---

V3: Addressed Johnson's comment on v2 patch.

V2: Addressed Johannes's comment on v1 patch.

 include/net/cfg80211.h       |  4 ++++
 include/uapi/linux/nl80211.h | 16 ++++++++++++++++
 net/wireless/nl80211.c       |  9 +++++++++
 3 files changed, 29 insertions(+)

diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h
index 58c2cd4..65161fd 100644
--- a/include/net/cfg80211.h
+++ b/include/net/cfg80211.h
@@ -1182,6 +1182,7 @@ enum cfg80211_ap_settings_flags {
  * @he_oper: HE operation IE (or %NULL if HE isn't enabled)
  * @fils_discovery: FILS discovery transmission parameters
  * @unsol_bcast_probe_resp: Unsolicited broadcast probe response parameters
+ * @beacon_tx_mode: Beacon Tx Mode setting
  */
 struct cfg80211_ap_settings {
 	struct cfg80211_chan_def chandef;
@@ -1214,6 +1215,7 @@ struct cfg80211_ap_settings {
 	struct cfg80211_he_bss_color he_bss_color;
 	struct cfg80211_fils_discovery fils_discovery;
 	struct cfg80211_unsol_bcast_probe_resp unsol_bcast_probe_resp;
+	enum nl80211_beacon_tx_mode beacon_tx_mode;
 };
 
 /**
@@ -2061,6 +2063,7 @@ struct mesh_config {
  *	to operate on DFS channels.
  * @control_port_over_nl80211: TRUE if userspace expects to exchange control
  *	port frames over NL80211 instead of the network interface.
+ * @beacon_tx_mode: Beacon Tx Mode setting.
  *
  * These parameters are fixed when the mesh is created.
  */
@@ -2084,6 +2087,7 @@ struct mesh_setup {
 	struct cfg80211_bitrate_mask beacon_rate;
 	bool userspace_handles_dfs;
 	bool control_port_over_nl80211;
+	enum nl80211_beacon_tx_mode beacon_tx_mode;
 };
 
 /**
diff --git a/include/uapi/linux/nl80211.h b/include/uapi/linux/nl80211.h
index f962c06..a86b32e 100644
--- a/include/uapi/linux/nl80211.h
+++ b/include/uapi/linux/nl80211.h
@@ -2560,6 +2560,10 @@ enum nl80211_commands {
  *	disassoc events to indicate that an immediate reconnect to the AP
  *	is desired.
  *
+ * @NL80211_ATTR_BEACON_TX_MODE: used to configure the beacon tx mode as
+ *      staggered mode = 1 or burst mode = 2 in %NL80211_CMD_START_AP or
+ *      %NL80211_CMD_JOIN_MESH from user-space.
+ *
  * @NUM_NL80211_ATTR: total number of nl80211_attrs available
  * @NL80211_ATTR_MAX: highest attribute number currently defined
  * @__NL80211_ATTR_AFTER_LAST: internal use
@@ -3057,6 +3061,8 @@ enum nl80211_attrs {
 
 	NL80211_ATTR_DISABLE_HE,
 
+	NL80211_ATTR_BEACON_TX_MODE,
+
 	/* add attributes here, update the policy in nl80211.c */
 
 	__NL80211_ATTR_AFTER_LAST,
@@ -7299,4 +7305,14 @@ enum nl80211_sar_specs_attrs {
 	NL80211_SAR_ATTR_SPECS_MAX = __NL80211_SAR_ATTR_SPECS_LAST - 1,
 };
 
+/**
+ * enum nl80211_beacon_tx_mode - Beacon Tx Mode enum.
+ *      Used to configure beacon staggered mode or beacon burst mode.
+ */
+enum nl80211_beacon_tx_mode {
+	NL80211_BEACON_DEFAULT_MODE = 0,
+	NL80211_BEACON_STAGGERED_MODE = 1,
+	NL80211_BEACON_BURST_MODE = 2,
+};
+
 #endif /* __LINUX_NL80211_H */
diff --git a/net/wireless/nl80211.c b/net/wireless/nl80211.c
index fc9286a..6076d00 100644
--- a/net/wireless/nl80211.c
+++ b/net/wireless/nl80211.c
@@ -759,6 +759,7 @@ static const struct nla_policy nl80211_policy[NUM_NL80211_ATTR] = {
 	[NL80211_ATTR_RECONNECT_REQUESTED] = { .type = NLA_REJECT },
 	[NL80211_ATTR_SAR_SPEC] = NLA_POLICY_NESTED(sar_policy),
 	[NL80211_ATTR_DISABLE_HE] = { .type = NLA_FLAG },
+	[NL80211_ATTR_BEACON_TX_MODE] = NLA_POLICY_RANGE(NLA_U32, 1, 2),
 };
 
 /* policy for the key attributes */
@@ -5342,6 +5343,10 @@ static int nl80211_start_ap(struct sk_buff *skb, struct genl_info *info)
 	params.dtim_period =
 		nla_get_u32(info->attrs[NL80211_ATTR_DTIM_PERIOD]);
 
+	if (info->attrs[NL80211_ATTR_BEACON_TX_MODE])
+		params.beacon_tx_mode =
+			nla_get_u32(info->attrs[NL80211_ATTR_BEACON_TX_MODE]);
+
 	err = cfg80211_validate_beacon_int(rdev, dev->ieee80211_ptr->iftype,
 					   params.beacon_interval);
 	if (err)
@@ -11896,6 +11901,10 @@ static int nl80211_join_mesh(struct sk_buff *skb, struct genl_info *info)
 			return -EINVAL;
 	}
 
+	if (info->attrs[NL80211_ATTR_BEACON_TX_MODE])
+		setup.beacon_tx_mode =
+			nla_get_u32(info->attrs[NL80211_ATTR_BEACON_TX_MODE]);
+
 	if (info->attrs[NL80211_ATTR_MESH_SETUP]) {
 		/* parse additional setup parameters if given */
 		err = nl80211_parse_mesh_setup(info, &setup);
-- 
2.7.4