Received-SPF: pass (google.com: domain of linux-wireless-owner@vger.kernel.org designates 23.128.96.18 as permitted sender) client-ip=23.128.96.18;
From:   Johan Almbladh <johan.almbladh@anyfinetworks.com>
To:     johannes@sipsolutions.net
Cc:     linux-wireless@vger.kernel.org,
        Johan Almbladh <johan.almbladh@anyfinetworks.com>
Subject: [PATCH] mac80211: Fix monitor MTU limit so that A-MSDUs get through
Date:   Mon, 28 Jun 2021 14:32:46 +0200
Message-Id: <20210628123246.2070558-1-johan.almbladh@anyfinetworks.com>
MIME-Version: 1.0
Content-Transfer-Encoding: 8bit
Precedence: bulk

The maximum MTU was set to 2304, which is the maximum MSDU size. While
this is valid for normal WLAN interfaces, it is too low for monitor
interfaces. A monitor interface may receive and inject MPDU frames, and
the maximum MPDU frame size is larger than 2304. The MPDU may also
contain an A-MSDU frame, in which case the size may be much larger than
the MTU limit. Since the maximum size of an A-MSDU depends on the PHY
mode of the transmitting STA, it is not possible to set an exact MTU
limit for a monitor interface. Now the maximum MTU for a monitor
interface is unrestricted.

Signed-off-by: Johan Almbladh <johan.almbladh@anyfinetworks.com>
---
 net/mac80211/iface.c | 11 +++++++++--
 1 file changed, 9 insertions(+), 2 deletions(-)

diff --git a/net/mac80211/iface.c b/net/mac80211/iface.c
index 1e5e9fc45523..cd96cd337aa8 100644
--- a/net/mac80211/iface.c
+++ b/net/mac80211/iface.c
@@ -2001,9 +2001,16 @@ int ieee80211_if_add(struct ieee80211_local *local, const char *name,
 
 		netdev_set_default_ethtool_ops(ndev, &ieee80211_ethtool_ops);
 
-		/* MTU range: 256 - 2304 */
+		/* MTU range is normally 256 - 2304, where the upper limit is
+		 * the maximum MSDU size. Monitor interfaces send and receive
+		 * MPDU and A-MSDU frames which may be much larger so we do
+		 * not impose an upper limit in that case.
+		 */
 		ndev->min_mtu = 256;
-		ndev->max_mtu = local->hw.max_mtu;
+		if (type == NL80211_IFTYPE_MONITOR)
+			ndev->max_mtu = 0;
+		else
+			ndev->max_mtu = local->hw.max_mtu;
 
 		ret = cfg80211_register_netdevice(ndev);
 		if (ret) {
-- 
2.25.1