Received-SPF: pass (google.com: domain of linux-wireless-owner@vger.kernel.org designates 23.128.96.18 as permitted sender) client-ip=23.128.96.18;
Sender: jouni=codeaurora.org@mg.codeaurora.org
DMARC-Filter: OpenDMARC Filter v1.3.2 smtp.codeaurora.org 97971C43460
From:   Jouni Malinen <jouni@codeaurora.org>
To:     Kalle Valo <kvalo@codeaurora.org>
Cc:     ath11k@lists.infradead.org, linux-wireless@vger.kernel.org,
        Wen Gong <wgong@codeaurora.org>,
        Jouni Malinen <jouni@codeaurora.org>
Subject: [PATCH 1/3] ath11k: re-enable ht_cap/vht_cap for 5G band for WCN6855
Date:   Wed,  4 Aug 2021 21:12:15 +0300
Message-Id: <20210804181217.88751-2-jouni@codeaurora.org>
In-Reply-To: <20210804181217.88751-1-jouni@codeaurora.org>
References: <20210804181217.88751-1-jouni@codeaurora.org>
MIME-Version: 1.0
Content-Transfer-Encoding: 8bit
Precedence: bulk

From: Wen Gong <wgong@codeaurora.org>

WCN6855 uses single_pdev_only, so it supports both the 5G and 6G bands
in the same ath11k/pdev and it needs to enable ht_cap/vht_cap for the 5G
band, otherwise it will downgrade to non-HT mode for the 5G band. Some
chips like QCN9074 only support the 6G band, not the 5G band, and use
the flag ar->supports_6ghz which is true to discard ht_cap/vht_cap.

Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-01720.1-QCAHSPSWPL_V1_V2_SILICONZ_LITE-1

Signed-off-by: Wen Gong <wgong@codeaurora.org>
Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
---
 drivers/net/wireless/ath/ath11k/mac.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/drivers/net/wireless/ath/ath11k/mac.c b/drivers/net/wireless/ath/ath11k/mac.c
index 133ecb351365..c83a968fc7ba 100644
--- a/drivers/net/wireless/ath/ath11k/mac.c
+++ b/drivers/net/wireless/ath/ath11k/mac.c
@@ -4491,7 +4491,9 @@ static void ath11k_mac_setup_ht_vht_cap(struct ath11k *ar,
 						    rate_cap_rx_chainmask);
 	}
 
-	if (cap->supported_bands & WMI_HOST_WLAN_5G_CAP && !ar->supports_6ghz) {
+	if (cap->supported_bands & WMI_HOST_WLAN_5G_CAP &&
+	    (ar->ab->hw_params.single_pdev_only ||
+	     !ar->supports_6ghz)) {
 		band = &ar->mac.sbands[NL80211_BAND_5GHZ];
 		ht_cap = cap->band[NL80211_BAND_5GHZ].ht_cap_info;
 		if (ht_cap_info)
-- 
2.25.1