Received-SPF: pass (google.com: domain of linux-wireless-owner@vger.kernel.org designates 23.128.96.18 as permitted sender) client-ip=23.128.96.18;
From:   Yufeng Mo <moyufeng@huawei.com>
To:     <davem@davemloft.net>, <kuba@kernel.org>
CC:     <netdev@vger.kernel.org>, <shenjian15@huawei.com>,
        <lipeng321@huawei.com>, <yisen.zhuang@huawei.com>,
        <linyunsheng@huawei.com>, <huangguangbin2@huawei.com>,
        <chenhao288@hisilicon.com>, <salil.mehta@huawei.com>,
        <moyufeng@huawei.com>, <linuxarm@huawei.com>,
        <linuxarm@openeuler.org>, <dledford@redhat.com>, <jgg@ziepe.ca>,
        <netanel@amazon.com>, <akiyano@amazon.com>,
        <thomas.lendacky@amd.com>, <irusskikh@marvell.com>,
        <michael.chan@broadcom.com>, <edwin.peer@broadcom.com>,
        <rohitm@chelsio.com>, <jacob.e.keller@intel.com>,
        <ioana.ciornei@nxp.com>, <vladimir.oltean@nxp.com>,
        <sgoutham@marvell.com>, <sbhatta@marvell.com>, <saeedm@nvidia.com>,
        <ecree.xilinx@gmail.com>, <grygorii.strashko@ti.com>,
        <merez@codeaurora.org>, <kvalo@codeaurora.org>,
        <linux-wireless@vger.kernel.org>
Subject: [RFC V3 net-next 1/4] ethtool: add two coalesce attributes for CQE mode
Date:   Fri, 13 Aug 2021 09:45:26 +0800
Message-ID: <1628819129-23332-2-git-send-email-moyufeng@huawei.com>
In-Reply-To: <1628819129-23332-1-git-send-email-moyufeng@huawei.com>
References: <1628819129-23332-1-git-send-email-moyufeng@huawei.com>
MIME-Version: 1.0
Content-Type: text/plain
Precedence: bulk

Currently, there many drivers who support CQE mode configuration,
some configure it as a fixed when initialized, some provide an
interface to change it by ethtool private flags. In order make it
more generic, add two new 'ETHTOOL_A_COALESCE_USE_CQE_TX' and
'ETHTOOL_A_COALESCE_USE_CQE_RX' coalesce attributes, then these
parameters can be accessed by ethtool netlink coalesce uAPI.

Signed-off-by: Yufeng Mo <moyufeng@huawei.com>
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
---
 Documentation/networking/ethtool-netlink.rst | 8 ++++++++
 include/linux/ethtool.h                      | 6 +++++-
 include/uapi/linux/ethtool_netlink.h         | 2 ++
 3 files changed, 15 insertions(+), 1 deletion(-)

diff --git a/Documentation/networking/ethtool-netlink.rst b/Documentation/networking/ethtool-netlink.rst
index c86628e..af963cf 100644
--- a/Documentation/networking/ethtool-netlink.rst
+++ b/Documentation/networking/ethtool-netlink.rst
@@ -939,6 +939,10 @@ Kernel response contents:
   ``ETHTOOL_A_COALESCE_TX_USECS_HIGH``         u32     delay (us), high Tx
   ``ETHTOOL_A_COALESCE_TX_MAX_FRAMES_HIGH``    u32     max packets, high Tx
   ``ETHTOOL_A_COALESCE_RATE_SAMPLE_INTERVAL``  u32     rate sampling interval
+  ``ETHTOOL_A_COALESCE_USE_CQE_TX``            bool    with timer reset on
+                                                       packet arrival, Tx
+  ``ETHTOOL_A_COALESCE_USE_CQE_RX``            bool    with timer reset on
+                                                       packet arrival, Rx
   ===========================================  ======  =======================
 
 Attributes are only included in reply if their value is not zero or the
@@ -977,6 +981,10 @@ Request contents:
   ``ETHTOOL_A_COALESCE_TX_USECS_HIGH``         u32     delay (us), high Tx
   ``ETHTOOL_A_COALESCE_TX_MAX_FRAMES_HIGH``    u32     max packets, high Tx
   ``ETHTOOL_A_COALESCE_RATE_SAMPLE_INTERVAL``  u32     rate sampling interval
+  ``ETHTOOL_A_COALESCE_USE_CQE_TX``            bool    with timer reset on
+                                                       packet arrival, Tx
+  ``ETHTOOL_A_COALESCE_USE_CQE_RX``            bool    with timer reset on
+                                                       packet arrival, Rx
   ===========================================  ======  =======================
 
 Request is rejected if it attributes declared as unsupported by driver (i.e.
diff --git a/include/linux/ethtool.h b/include/linux/ethtool.h
index 4711b96..bad4c7a 100644
--- a/include/linux/ethtool.h
+++ b/include/linux/ethtool.h
@@ -211,7 +211,9 @@ bool ethtool_convert_link_mode_to_legacy_u32(u32 *legacy_u32,
 #define ETHTOOL_COALESCE_TX_USECS_HIGH		BIT(19)
 #define ETHTOOL_COALESCE_TX_MAX_FRAMES_HIGH	BIT(20)
 #define ETHTOOL_COALESCE_RATE_SAMPLE_INTERVAL	BIT(21)
-#define ETHTOOL_COALESCE_ALL_PARAMS		GENMASK(21, 0)
+#define ETHTOOL_COALESCE_USE_CQE_RX		BIT(22)
+#define ETHTOOL_COALESCE_USE_CQE_TX		BIT(23)
+#define ETHTOOL_COALESCE_ALL_PARAMS		GENMASK(23, 0)
 
 #define ETHTOOL_COALESCE_USECS						\
 	(ETHTOOL_COALESCE_RX_USECS | ETHTOOL_COALESCE_TX_USECS)
@@ -237,6 +239,8 @@ bool ethtool_convert_link_mode_to_legacy_u32(u32 *legacy_u32,
 	 ETHTOOL_COALESCE_RX_USECS_LOW | ETHTOOL_COALESCE_RX_USECS_HIGH | \
 	 ETHTOOL_COALESCE_PKT_RATE_LOW | ETHTOOL_COALESCE_PKT_RATE_HIGH | \
 	 ETHTOOL_COALESCE_RATE_SAMPLE_INTERVAL)
+#define ETHTOOL_COALESCE_USE_CQE					\
+	(ETHTOOL_COALESCE_USE_CQE_RX | ETHTOOL_COALESCE_USE_CQE_TX)
 
 #define ETHTOOL_STAT_NOT_SET	(~0ULL)
 
diff --git a/include/uapi/linux/ethtool_netlink.h b/include/uapi/linux/ethtool_netlink.h
index b3b9371..5545f1c 100644
--- a/include/uapi/linux/ethtool_netlink.h
+++ b/include/uapi/linux/ethtool_netlink.h
@@ -377,6 +377,8 @@ enum {
 	ETHTOOL_A_COALESCE_TX_USECS_HIGH,		/* u32 */
 	ETHTOOL_A_COALESCE_TX_MAX_FRAMES_HIGH,		/* u32 */
 	ETHTOOL_A_COALESCE_RATE_SAMPLE_INTERVAL,	/* u32 */
+	ETHTOOL_A_COALESCE_USE_CQE_MODE_TX,		/* u8 */
+	ETHTOOL_A_COALESCE_USE_CQE_MODE_RX,		/* u8 */
 
 	/* add new constants above here */
 	__ETHTOOL_A_COALESCE_CNT,
-- 
2.8.1