Received-SPF: pass (google.com: domain of linux-wireless-owner@vger.kernel.org designates 23.128.96.18 as permitted sender) client-ip=23.128.96.18;
Date:   Thu, 16 Sep 2021 22:49:27 +0530
From:   Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
To:     Kalle Valo <kvalo@codeaurora.org>
Cc:     Loic Poulain <loic.poulain@linaro.org>, ath11k@lists.infradead.org,
        linux-arm-msm <linux-arm-msm@vger.kernel.org>,
        linux-wireless@vger.kernel.org, regressions@lists.linux.dev
Subject: Re: [regression] mhi: ath11k resume fails on some devices
Message-ID: <20210916171927.GB9027@thinkpad>
References: <871r5p0x2u.fsf@codeaurora.org>
 <CAMZdPi8UJLvBFQd8-nf-iHAQh8cEuihq97PUFfZ7Q=rxRQoPsg@mail.gmail.com>
 <20210916111218.GA12918@thinkpad>
 <CAMZdPi94607mZorp+Zmkw3seWXak6p9Jr05CQ5hhfgKQoG8n7Q@mail.gmail.com>
 <20210916163529.GA9027@thinkpad>
 <87k0jgxyjp.fsf@codeaurora.org>
MIME-Version: 1.0
Content-Type: text/plain; charset=utf-8
Content-Disposition: inline
Content-Transfer-Encoding: 8bit
In-Reply-To: <87k0jgxyjp.fsf@codeaurora.org>
Precedence: bulk

On Thu, Sep 16, 2021 at 07:42:02PM +0300, Kalle Valo wrote:
> Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> writes:
> 
> > On Thu, Sep 16, 2021 at 01:18:22PM +0200, Loic Poulain wrote:
> >> Le jeu. 16 sept. 2021 à 13:12, Manivannan Sadhasivam <
> >> manivannan.sadhasivam@linaro.org> a écrit :
> >> 
> >
> > [...]
> >
> >> > If things seems to work fine without that patch, then it implies that
> >> > setting M0
> >> > state works during resume. I think we should just revert that patch.
> >> >
> >> > Loic, did that patch fix any issue for you or it was a cosmetic fix only?
> >> 
> >> 
> >> It fixes sdx modem resuming issue, without that we don’t know modem needs
> >> to be reinitialized.
> >> 
> >
> > Okay. Then in that case, the recovery mechanism has to be added to the ath11k
> > MHI controller.
> 
> What does that mean in practise, do you have any pointers or examples? I
> have no clue what you are proposing :)
> 

Take a look at the mhi_pci_recovery_work() function below:
https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/drivers/bus/mhi/pci_generic.c#n610

You need to implement something similar that basically powers up the MHI
endpoint (QCA6390) in case pm_resume() fails. At minimum, you need to call
below functions:

# Check if the device is powered on. If yes, then power it down to bring it back
mhi_power_down()
mhi_unprepare_after_power_down()

# Power up the device
mhi_prepare_for_power_up()
mhi_sync_power_up()

This implies that the WLAN device has been powered off during suspend, so the
resume fails and we are bringing the device back to working state.

> > If that's too much of work for Kalle, then I'll look into it. But I might get
> > time only after Plumbers.
> 
> I'm busy, as always, so not sure when I'm able to do it either. I think
> we should seriously consider reverting 020d3b26c07a and adding it back
> after ath11k is able to handle this new situation.
> 

Since Loic said that reverting would cause his modem (SDX device) to fail during
resume, this is not possible.

Thanks,
Mani

> -- 
> https://patchwork.kernel.org/project/linux-wireless/list/
> 
> https://wireless.wiki.kernel.org/en/developers/documentation/submittingpatches