Received-SPF: pass (google.com: domain of linux-wireless-owner@vger.kernel.org designates 23.128.96.18 as permitted sender) client-ip=23.128.96.18;
From:   Christian Lamparter <chunkeey@gmail.com>
To:     linux-wireless@vger.kernel.org, ath9k-devel@qca.qualcomm.com
Cc:     Kalle Valo <kvalo@codeaurora.org>
Subject: [PATCH v1] ath9k: support DT ieee80211-freq-limit property to limit channels
Date:   Sat,  9 Oct 2021 23:28:47 +0200
Message-Id: <20211009212847.1781986-1-chunkeey@gmail.com>
MIME-Version: 1.0
Content-Transfer-Encoding: 8bit
Precedence: bulk

The common DT property can be used to limit the available channels
but ath9k has to manually call wiphy_read_of_freq_limits().

Signed-off-by: Christian Lamparter <chunkeey@gmail.com>

---

I would have put this into ath9k_of_init(). But it didn't work there.
The reason is that in ath9k_of_init() the channels and bands are not yet
registered in the wiphy struct. So there isn't any channel to flag as
disabled.

---
 drivers/net/wireless/ath/ath9k/init.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/net/wireless/ath/ath9k/init.c b/drivers/net/wireless/ath/ath9k/init.c
index 1568730fc01e..0344d6f27275 100644
--- a/drivers/net/wireless/ath/ath9k/init.c
+++ b/drivers/net/wireless/ath/ath9k/init.c
@@ -1094,6 +1094,8 @@ int ath9k_init_device(u16 devid, struct ath_softc *sc,
 		ARRAY_SIZE(ath9k_tpt_blink));
 #endif
 
+	wiphy_read_of_freq_limits(hw->wiphy);
+
 	/* Register with mac80211 */
 	error = ieee80211_register_hw(hw);
 	if (error)
-- 
2.33.0