Received-SPF: pass (google.com: domain of linux-wireless-owner@vger.kernel.org designates 23.128.96.18 as permitted sender) client-ip=23.128.96.18;
From:   Wen Gong <quic_wgong@quicinc.com>
To:     <ath11k@lists.infradead.org>
CC:     <linux-wireless@vger.kernel.org>, <quic_wgong@quicinc.com>
Subject: [PATCH 15/15] ath11k: send TPC power to firmware for 6 GHz station
Date:   Tue, 26 Oct 2021 07:19:13 -0400
Message-ID: <20211026111913.7346-16-quic_wgong@quicinc.com>
In-Reply-To: <20211026111913.7346-1-quic_wgong@quicinc.com>
References: <20211026111913.7346-1-quic_wgong@quicinc.com>
MIME-Version: 1.0
Content-Transfer-Encoding: 8bit
Content-Type: text/plain
Precedence: bulk

When station is connected to a 6 GHz AP, it has 2 way to configure
the power limit to firmware. The first way is to send 2 wmi command
WMI_PDEV_PARAM_TXPOWER_LIMIT2G/WMI_PDEV_PARAM_TXPOWER_LIMIT5G to
firmware, the second way is to send WMI_VDEV_SET_TPC_POWER_CMDID to
firmware which include more parameters for power control.

The first way is disabled in previous patch
"ath11k: discard BSS_CHANGED_TXPOWER when EXT_TPC_REG_SUPPORT for 6 GHz".

Prepare the parameter for wmi command WMI_VDEV_SET_TPC_POWER_CMDID and
send the firmware after vdev start response success from firmware, it
is for the second way of power control.

Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-01720.1-QCAHSPSWPL_V1_V2_SILICONZ_LITE-1

Signed-off-by: Wen Gong <quic_wgong@quicinc.com>
---
 drivers/net/wireless/ath/ath11k/mac.c | 8 +++++++-
 1 file changed, 7 insertions(+), 1 deletion(-)

diff --git a/drivers/net/wireless/ath/ath11k/mac.c b/drivers/net/wireless/ath/ath11k/mac.c
index 301e08a85f47..88c18ffee7a3 100644
--- a/drivers/net/wireless/ath/ath11k/mac.c
+++ b/drivers/net/wireless/ath/ath11k/mac.c
@@ -5312,6 +5312,12 @@ ath11k_mac_vdev_start_restart(struct ath11k_vif *arvif,
 		return ret;
 	}
 
+	if (ath11k_mac_station_support_tpc(ar, arvif, chandef)) {
+		ath11k_mac_fill_reg_tpc_info(ar, arvif->vif, &arvif->chanctx);
+		ath11k_wmi_send_vdev_set_tpc_power(ar, arvif->vdev_id,
+						   &arvif->reg_tpc_info);
+	}
+
 	ar->num_started_vdevs++;
 	ath11k_dbg(ab, ATH11K_DBG_MAC,  "vdev %pM started, vdev_id %d\n",
 		   arvif->vif->addr, arvif->vdev_id);
@@ -6098,7 +6104,7 @@ ath11k_mac_op_assign_vif_chanctx(struct ieee80211_hw *hw,
 		if (power_type == IEEE80211_REG_UNSET_AP)
 			power_type = IEEE80211_REG_LPI_AP;
 		ath11k_reg_handle_chan_list(ab, reg_info, power_type);
-
+		arvif->chanctx = *ctx;
 		ath11k_mac_parse_tx_pwr_env(ar, vif, ctx);
 	}
 
-- 
2.31.1