Content-Type: text/plain; charset="utf-8"
MIME-Version: 1.0
Content-Transfer-Encoding: 7bit
Subject: Re: [PATCH v2] ath11k: add support for hardware rfkill for QCA6390
From:   Kalle Valo <kvalo@kernel.org>
In-Reply-To: <20211217102334.14907-1-quic_wgong@quicinc.com>
References: <20211217102334.14907-1-quic_wgong@quicinc.com>
To:     Wen Gong <quic_wgong@quicinc.com>
Cc:     <ath11k@lists.infradead.org>, <linux-wireless@vger.kernel.org>,
        <quic_wgong@quicinc.com>
User-Agent: pwcli/0.1.0-git (https://github.com/kvalo/pwcli/) Python/3.7.3
Message-ID: <164002496714.8180.10579865678538990827.kvalo@kernel.org>
Date:   Mon, 20 Dec 2021 18:29:28 +0000 (UTC)
Precedence: bulk

Wen Gong <quic_wgong@quicinc.com> wrote:

> When hardware rfkill is enabled in the firmware it will report the
> capability via using WMI_SYS_CAP_INFO_RFKILL bit in the WMI_SERVICE_READY
> event to the host. ath11k will check the capability, and if it is enabled then
> ath11k will set the GPIO information to firmware using WMI_PDEV_SET_PARAM. When
> the firmware detects hardware rfkill is enabled by the user, it will report it
> via WMI_RFKILL_STATE_CHANGE_EVENTID. Once ath11k receives the event it will
> send wmi command WMI_PDEV_SET_PARAM to the firmware and also notifies cfg80211.
> 
> This only enable rfkill feature for QCA6390, rfkill_pin is all initialized to 0
> for other chips in ath11k_hw_params.
> 
> Tested-on: QCA6390 hw2.0 PCI WLAN.HST.1.0.1-01740-QCAHSTSWPLZ_V2_TO_X86-1
> 
> Signed-off-by: Wen Gong <quic_wgong@quicinc.com>
> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>

Patch applied to ath-next branch of ath.git, thanks.

ec038c6127fa ath11k: add support for hardware rfkill for QCA6390

-- 
https://patchwork.kernel.org/project/linux-wireless/patch/20211217102334.14907-1-quic_wgong@quicinc.com/

https://wireless.wiki.kernel.org/en/developers/documentation/submittingpatches