Received-SPF: pass (google.com: domain of linux-wireless-owner@vger.kernel.org designates 2620:137:e000::1:20 as permitted sender) client-ip=2620:137:e000::1:20;
Sender: Larry Finger <larry.finger@gmail.com>
Message-ID: <bc2d4f83-0674-ccae-71c8-14427de59f96@lwfinger.net>
Date:   Sat, 26 Mar 2022 15:11:46 -0500
MIME-Version: 1.0
User-Agent: Mozilla/5.0 (X11; Linux x86_64; rv:91.0) Gecko/20100101
 Thunderbird/91.7.0
Subject: Re: [PATCH 16/22] dvb-usb: Replace comments with C99 initializers
Content-Language: en-US
To:     Joe Perches <joe@perches.com>,
        Mauro Carvalho Chehab <mchehab@kernel.org>,
        =?UTF-8?Q?Benjamin_St=c3=bcrz?= <benni@stuerz.xyz>
Cc:     andrew@lunn.ch, sebastian.hesselbarth@gmail.com,
        gregory.clement@bootlin.com, linux@armlinux.org.uk,
        linux@simtec.co.uk, krzk@kernel.org, alim.akhtar@samsung.com,
        tglx@linutronix.de, mingo@redhat.com, bp@alien8.de,
        dave.hansen@linux.intel.com, hpa@zytor.com, robert.moore@intel.com,
        rafael.j.wysocki@intel.com, lenb@kernel.org, 3chas3@gmail.com,
        laforge@gnumonks.org, arnd@arndb.de, gregkh@linuxfoundation.org,
        tony.luck@intel.com, james.morse@arm.com, rric@kernel.org,
        linus.walleij@linaro.org, brgl@bgdev.pl,
        mike.marciniszyn@cornelisnetworks.com,
        dennis.dalessandro@cornelisnetworks.com, jgg@ziepe.ca,
        pali@kernel.org, dmitry.torokhov@gmail.com, isdn@linux-pingi.de,
        benh@kernel.crashing.org, fbarrat@linux.ibm.com, ajd@linux.ibm.com,
        davem@davemloft.net, kuba@kernel.org, pabeni@redhat.com,
        nico@fluxnic.net, loic.poulain@linaro.org, kvalo@kernel.org,
        pkshih@realtek.com, bhelgaas@google.com,
        linux-arm-kernel@lists.infradead.org, linux-kernel@vger.kernel.org,
        linux-samsung-soc@vger.kernel.org, linux-ia64@vger.kernel.org,
        linux-acpi@vger.kernel.org, devel@acpica.org,
        linux-atm-general@lists.sourceforge.net, netdev@vger.kernel.org,
        linux-edac@vger.kernel.org, linux-gpio@vger.kernel.org,
        linux-rdma@vger.kernel.org, linux-input@vger.kernel.org,
        linuxppc-dev@lists.ozlabs.org, linux-media@vger.kernel.org,
        wcn36xx@lists.infradead.org, linux-wireless@vger.kernel.org,
        linux-pci@vger.kernel.org
References: <20220326165909.506926-1-benni@stuerz.xyz>
 <20220326165909.506926-16-benni@stuerz.xyz>
 <20220326192454.14115baa@coco.lan> <20220326192720.0fddd6dd@coco.lan>
 <63a5e3143e904d1391490f27cc106be894b52ca2.camel@perches.com>
From:   Larry Finger <Larry.Finger@lwfinger.net>
In-Reply-To: <63a5e3143e904d1391490f27cc106be894b52ca2.camel@perches.com>
Content-Type: text/plain; charset=UTF-8; format=flowed
Content-Transfer-Encoding: 8bit
Precedence: bulk

On 3/26/22 14:51, Joe Perches wrote:
> On Sat, 2022-03-26 at 19:27 +0100, Mauro Carvalho Chehab wrote:
>> Em Sat, 26 Mar 2022 19:24:54 +0100
>> Mauro Carvalho Chehab <mchehab@kernel.org> escreveu:
>>
>>> Em Sat, 26 Mar 2022 17:59:03 +0100
>>> Benjamin Stürz <benni@stuerz.xyz> escreveu:
>>>
>>>> This replaces comments with C99's designated
>>>> initializers because the kernel supports them now.
>>>>
>>>> Signed-off-by: Benjamin Stürz <benni@stuerz.xyz>
>>>> ---
>>>>   drivers/media/usb/dvb-usb/dibusb-mb.c | 62 +++++++++++++--------------
>>>>   drivers/media/usb/dvb-usb/dibusb-mc.c | 34 +++++++--------
>>>>   2 files changed, 48 insertions(+), 48 deletions(-)
>>>>
>>>> diff --git a/drivers/media/usb/dvb-usb/dibusb-mb.c b/drivers/media/usb/dvb-usb/dibusb-mb.c
>>>> index e9dc27f73970..f188e07f518b 100644
>>>> --- a/drivers/media/usb/dvb-usb/dibusb-mb.c
>>>> +++ b/drivers/media/usb/dvb-usb/dibusb-mb.c
>>>> @@ -122,40 +122,40 @@ static int dibusb_probe(struct usb_interface *intf,
>>>>   
>>>>   /* do not change the order of the ID table */
>>>>   static struct usb_device_id dibusb_dib3000mb_table [] = {
>>>> -/* 00 */	{ USB_DEVICE(USB_VID_WIDEVIEW,		USB_PID_AVERMEDIA_DVBT_USB_COLD) },
>>>> -/* 01 */	{ USB_DEVICE(USB_VID_WIDEVIEW,		USB_PID_AVERMEDIA_DVBT_USB_WARM) },
>>>> -/* 02 */	{ USB_DEVICE(USB_VID_COMPRO,		USB_PID_COMPRO_DVBU2000_COLD) },
>>>> -/* 03 */	{ USB_DEVICE(USB_VID_COMPRO,		USB_PID_COMPRO_DVBU2000_WARM) },
>>>> -/* 04 */	{ USB_DEVICE(USB_VID_COMPRO_UNK,	USB_PID_COMPRO_DVBU2000_UNK_COLD) },
>>>> -/* 05 */	{ USB_DEVICE(USB_VID_DIBCOM,		USB_PID_DIBCOM_MOD3000_COLD) },
>>>> -/* 06 */	{ USB_DEVICE(USB_VID_DIBCOM,		USB_PID_DIBCOM_MOD3000_WARM) },
>>>> -/* 07 */	{ USB_DEVICE(USB_VID_EMPIA,		USB_PID_KWORLD_VSTREAM_COLD) },
>>>> -/* 08 */	{ USB_DEVICE(USB_VID_EMPIA,		USB_PID_KWORLD_VSTREAM_WARM) },
>>>> -/* 09 */	{ USB_DEVICE(USB_VID_GRANDTEC,		USB_PID_GRANDTEC_DVBT_USB_COLD) },
>>>> -/* 10 */	{ USB_DEVICE(USB_VID_GRANDTEC,		USB_PID_GRANDTEC_DVBT_USB_WARM) },
>>>> -/* 11 */	{ USB_DEVICE(USB_VID_GRANDTEC,		USB_PID_DIBCOM_MOD3000_COLD) },
>>>> -/* 12 */	{ USB_DEVICE(USB_VID_GRANDTEC,		USB_PID_DIBCOM_MOD3000_WARM) },
>>>> -/* 13 */	{ USB_DEVICE(USB_VID_HYPER_PALTEK,	USB_PID_UNK_HYPER_PALTEK_COLD) },
>>>> -/* 14 */	{ USB_DEVICE(USB_VID_HYPER_PALTEK,	USB_PID_UNK_HYPER_PALTEK_WARM) },
>>>> -/* 15 */	{ USB_DEVICE(USB_VID_VISIONPLUS,	USB_PID_TWINHAN_VP7041_COLD) },
>>>> -/* 16 */	{ USB_DEVICE(USB_VID_VISIONPLUS,	USB_PID_TWINHAN_VP7041_WARM) },
>>>> -/* 17 */	{ USB_DEVICE(USB_VID_TWINHAN,		USB_PID_TWINHAN_VP7041_COLD) },
>>>> -/* 18 */	{ USB_DEVICE(USB_VID_TWINHAN,		USB_PID_TWINHAN_VP7041_WARM) },
>>>> -/* 19 */	{ USB_DEVICE(USB_VID_ULTIMA_ELECTRONIC,	USB_PID_ULTIMA_TVBOX_COLD) },
>>>> -/* 20 */	{ USB_DEVICE(USB_VID_ULTIMA_ELECTRONIC,	USB_PID_ULTIMA_TVBOX_WARM) },
>>>> -/* 21 */	{ USB_DEVICE(USB_VID_ULTIMA_ELECTRONIC,	USB_PID_ULTIMA_TVBOX_AN2235_COLD) },
>>>> -/* 22 */	{ USB_DEVICE(USB_VID_ULTIMA_ELECTRONIC,	USB_PID_ULTIMA_TVBOX_AN2235_WARM) },
>>>> -/* 23 */	{ USB_DEVICE(USB_VID_ADSTECH,		USB_PID_ADSTECH_USB2_COLD) },
>>>> +[0]  =	{ USB_DEVICE(USB_VID_WIDEVIEW,		USB_PID_AVERMEDIA_DVBT_USB_COLD) },
>>>> +[1]  =	{ USB_DEVICE(USB_VID_WIDEVIEW,		USB_PID_AVERMEDIA_DVBT_USB_WARM) },
>>>
>>> While here, please properly indent this table, and respect the 80-columns limit,
>>> e. g.:
>>>
>>> static struct usb_device_id dibusb_dib3000mb_table [] = {
>>> 	[0] = { USB_DEVICE(USB_VID_WIDEVIEW
>>> 			   USB_PID_AVERMEDIA_DVBT_USB_COLD)
>>> 	},
>>> 	[1]  =	{ USB_DEVICE(USB_VID_WIDEVIEW,
>>> 			     USB_PID_AVERMEDIA_DVBT_USB_WARM)
>>> 	},
>>> 	...
>>
>> Err.... something went wrong with my space bar and I ended hitting send to
>> soon... I meant:
>>
>> static struct usb_device_id dibusb_dib3000mb_table [] = {
>>   	[0] = { USB_DEVICE(USB_VID_WIDEVIEW
>>   			   USB_PID_AVERMEDIA_DVBT_USB_COLD)
>>   	},
>>   	[1] = { USB_DEVICE(USB_VID_WIDEVIEW,
>>   			   USB_PID_AVERMEDIA_DVBT_USB_WARM)
>>   	},
>> 	...
>> };
> 
> maybe static const too
> 
> and
> 
> maybe
> 
> #define DIB_DEVICE(vid, pid)	\
> 	{ USB_DEVICE(USB_VID_ ## vid, USB_PID_ ## pid) }
> 
> so maybe
> 
> static const struct usb_device_id dibusb_dib3000mb_table[] = {
> 	[0] = DIB_DEVICE(WIDEVIEW, AVERMEDIA_DVBT_USB_COLD),
> 	[1] = DIB_DEVICE(WIDEVIEW, AVERMEDIA_DVBT_USB_WARM),
> 	...
> };
> 
> though I _really_ doubt the value of the specific indexing.
> 
> I think this isn't really worth changing at all.

I agree. For the drivers that I maintain, I try to keep the vendor and device 
ids in numerical order. As this table does not require a special order, adding a 
new one in the middle would require redoing all of then after that point. That 
would be pointless work!

Larry