Received-SPF: pass (google.com: domain of linux-wireless-owner@vger.kernel.org designates 2620:137:e000::1:20 as permitted sender) client-ip=2620:137:e000::1:20;
From:   Manikanta Pubbisetty <quic_mpubbise@quicinc.com>
To:     <ath11k@lists.infradead.org>
CC:     <linux-wireless@vger.kernel.org>, <devicetree@vger.kernel.org>,
        <robh@kernel.org>, <mka@chromium.org>,
        Manikanta Pubbisetty <quic_mpubbise@quicinc.com>
Subject: [PATCH v7 6/9] ath11k: Add QMI changes for WCN6750
Date:   Fri, 29 Apr 2022 22:34:59 +0530
Message-ID: <20220429170502.20080-7-quic_mpubbise@quicinc.com>
In-Reply-To: <20220429170502.20080-1-quic_mpubbise@quicinc.com>
References: <20220429170502.20080-1-quic_mpubbise@quicinc.com>
MIME-Version: 1.0
Content-Transfer-Encoding: 8bit
Content-Type: text/plain
Precedence: bulk

In the case of WCN6750, FW doesn't request for DDR memory
via QMI, instead it uses a fixed 12MB reserved Memory region
in the DDR which is called as MSA region. As a result, QMI
message sequence is not same as other ath11k supported devices.

Also, M3 firmware will be bundled into the FW and will be
downloaded to the target as part of Q6 boot.

This is the QMI flow in the case of WCN6750,

1) QMI firmware indication REQ/RESP
2) QMI host capability REQ/RESP
3) QMI target capability REQ/RESP
4) QMI device info REQ/RESP
5) QMI BDF download
6) QMI FW ready

Tested-on: WCN6750 hw1.0 AHB WLAN.MSL.1.0.1-00887-QCAMSLSWPLZ-1
Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-01720.1-QCAHSPSWPL_V1_V2_SILICONZ_LITE-1
Tested-on: QCN9074 hw1.0 PCI WLAN.HK.2.5.0.1-01100-QCAHKSWPL_SILICONZ-1
Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.4.0.1-00192-QCAHKSWPL_SILICONZ-1

Signed-off-by: Manikanta Pubbisetty <quic_mpubbise@quicinc.com>
---
 drivers/net/wireless/ath/ath11k/core.c |  7 +++
 drivers/net/wireless/ath/ath11k/hw.h   |  1 +
 drivers/net/wireless/ath/ath11k/qmi.c  | 76 ++++++++++++++++----------
 3 files changed, 56 insertions(+), 28 deletions(-)

diff --git a/drivers/net/wireless/ath/ath11k/core.c b/drivers/net/wireless/ath/ath11k/core.c
index 3be4327b4d9c..64cf87fd6a7f 100644
--- a/drivers/net/wireless/ath/ath11k/core.c
+++ b/drivers/net/wireless/ath/ath11k/core.c
@@ -109,6 +109,7 @@ static const struct ath11k_hw_params ath11k_hw_params[] = {
 		.hybrid_bus_type = false,
 		.dp_window_idx = 0,
 		.ce_window_idx = 0,
+		.fixed_fw_mem = false,
 	},
 	{
 		.hw_rev = ATH11K_HW_IPQ6018_HW10,
@@ -183,6 +184,7 @@ static const struct ath11k_hw_params ath11k_hw_params[] = {
 		.hybrid_bus_type = false,
 		.dp_window_idx = 0,
 		.ce_window_idx = 0,
+		.fixed_fw_mem = false,
 	},
 	{
 		.name = "qca6390 hw2.0",
@@ -256,6 +258,7 @@ static const struct ath11k_hw_params ath11k_hw_params[] = {
 		.hybrid_bus_type = false,
 		.dp_window_idx = 0,
 		.ce_window_idx = 0,
+		.fixed_fw_mem = false,
 	},
 	{
 		.name = "qcn9074 hw1.0",
@@ -329,6 +332,7 @@ static const struct ath11k_hw_params ath11k_hw_params[] = {
 		.hybrid_bus_type = false,
 		.dp_window_idx = 3,
 		.ce_window_idx = 2,
+		.fixed_fw_mem = false,
 	},
 	{
 		.name = "wcn6855 hw2.0",
@@ -402,6 +406,7 @@ static const struct ath11k_hw_params ath11k_hw_params[] = {
 		.hybrid_bus_type = false,
 		.dp_window_idx = 0,
 		.ce_window_idx = 0,
+		.fixed_fw_mem = false,
 	},
 	{
 		.name = "wcn6855 hw2.1",
@@ -474,6 +479,7 @@ static const struct ath11k_hw_params ath11k_hw_params[] = {
 		.hybrid_bus_type = false,
 		.dp_window_idx = 0,
 		.ce_window_idx = 0,
+		.fixed_fw_mem = false,
 	},
 	{
 		.name = "wcn6750 hw1.0",
@@ -543,6 +549,7 @@ static const struct ath11k_hw_params ath11k_hw_params[] = {
 		.hybrid_bus_type = true,
 		.dp_window_idx = 1,
 		.ce_window_idx = 2,
+		.fixed_fw_mem = true,
 	},
 };
 
diff --git a/drivers/net/wireless/ath/ath11k/hw.h b/drivers/net/wireless/ath/ath11k/hw.h
index b63538084215..b5a4758a6bc5 100644
--- a/drivers/net/wireless/ath/ath11k/hw.h
+++ b/drivers/net/wireless/ath/ath11k/hw.h
@@ -203,6 +203,7 @@ struct ath11k_hw_params {
 	bool hybrid_bus_type;
 	u8 dp_window_idx;
 	u8 ce_window_idx;
+	bool fixed_fw_mem;
 };
 
 struct ath11k_hw_ops {
diff --git a/drivers/net/wireless/ath/ath11k/qmi.c b/drivers/net/wireless/ath/ath11k/qmi.c
index 71e25cb094f8..3eef6a162cc2 100644
--- a/drivers/net/wireless/ath/ath11k/qmi.c
+++ b/drivers/net/wireless/ath/ath11k/qmi.c
@@ -1799,10 +1799,6 @@ static int ath11k_qmi_fw_ind_register_send(struct ath11k_base *ab)
 	req->client_id = QMI_WLANFW_CLIENT_ID;
 	req->fw_ready_enable_valid = 1;
 	req->fw_ready_enable = 1;
-	req->request_mem_enable_valid = 1;
-	req->request_mem_enable = 1;
-	req->fw_mem_ready_enable_valid = 1;
-	req->fw_mem_ready_enable = 1;
 	req->cal_done_enable_valid = 1;
 	req->cal_done_enable = 1;
 	req->fw_init_done_enable_valid = 1;
@@ -1811,6 +1807,17 @@ static int ath11k_qmi_fw_ind_register_send(struct ath11k_base *ab)
 	req->pin_connect_result_enable_valid = 0;
 	req->pin_connect_result_enable = 0;
 
+	/* WCN6750 doesn't request for DDR memory via QMI,
+	 * instead it uses a fixed 12MB reserved memory
+	 * region in DDR.
+	 */
+	if (!ab->hw_params.fixed_fw_mem) {
+		req->request_mem_enable_valid = 1;
+		req->request_mem_enable = 1;
+		req->fw_mem_ready_enable_valid = 1;
+		req->fw_mem_ready_enable = 1;
+	}
+
 	ret = qmi_txn_init(handle, &txn,
 			   qmi_wlanfw_ind_register_resp_msg_v01_ei, resp);
 	if (ret < 0)
@@ -2839,27 +2846,6 @@ ath11k_qmi_driver_event_post(struct ath11k_qmi *qmi,
 	return 0;
 }
 
-static int ath11k_qmi_event_server_arrive(struct ath11k_qmi *qmi)
-{
-	struct ath11k_base *ab = qmi->ab;
-	int ret;
-
-	ret = ath11k_qmi_fw_ind_register_send(ab);
-	if (ret < 0) {
-		ath11k_warn(ab, "failed to send qmi firmware indication: %d\n",
-			    ret);
-		return ret;
-	}
-
-	ret = ath11k_qmi_host_cap_send(ab);
-	if (ret < 0) {
-		ath11k_warn(ab, "failed to send qmi host cap: %d\n", ret);
-		return ret;
-	}
-
-	return ret;
-}
-
 static int ath11k_qmi_event_mem_request(struct ath11k_qmi *qmi)
 {
 	struct ath11k_base *ab = qmi->ab;
@@ -2901,9 +2887,33 @@ static int ath11k_qmi_event_load_bdf(struct ath11k_qmi *qmi)
 		return ret;
 	}
 
-	ret = ath11k_qmi_wlanfw_m3_info_send(ab);
+	return 0;
+}
+
+static int ath11k_qmi_event_server_arrive(struct ath11k_qmi *qmi)
+{
+	struct ath11k_base *ab = qmi->ab;
+	int ret;
+
+	ret = ath11k_qmi_fw_ind_register_send(ab);
+	if (ret < 0) {
+		ath11k_warn(ab, "failed to send qmi firmware indication: %d\n",
+			    ret);
+		return ret;
+	}
+
+	ret = ath11k_qmi_host_cap_send(ab);
 	if (ret < 0) {
-		ath11k_warn(ab, "failed to send qmi m3 info req: %d\n", ret);
+		ath11k_warn(ab, "failed to send qmi host cap: %d\n", ret);
+		return ret;
+	}
+
+	if (!ab->hw_params.fixed_fw_mem)
+		return ret;
+
+	ret = ath11k_qmi_event_load_bdf(qmi);
+	if (ret < 0) {
+		ath11k_warn(ab, "qmi failed to download BDF:%d\n", ret);
 		return ret;
 	}
 
@@ -3103,8 +3113,18 @@ static void ath11k_qmi_driver_event_work(struct work_struct *work)
 			break;
 		case ATH11K_QMI_EVENT_FW_MEM_READY:
 			ret = ath11k_qmi_event_load_bdf(qmi);
-			if (ret < 0)
+			if (ret < 0) {
 				set_bit(ATH11K_FLAG_QMI_FAIL, &ab->dev_flags);
+				break;
+			}
+
+			ret = ath11k_qmi_wlanfw_m3_info_send(ab);
+			if (ret < 0) {
+				ath11k_warn(ab,
+					    "failed to send qmi m3 info req: %d\n", ret);
+				set_bit(ATH11K_FLAG_QMI_FAIL, &ab->dev_flags);
+			}
+
 			break;
 		case ATH11K_QMI_EVENT_FW_READY:
 			clear_bit(ATH11K_FLAG_QMI_FAIL, &ab->dev_flags);
-- 
2.35.1