Received-SPF: pass (google.com: domain of linux-wireless-owner@vger.kernel.org designates 2620:137:e000::1:20 as permitted sender) client-ip=2620:137:e000::1:20;
MIME-Version: 1.0
References: <20220516032519.29831-1-ryazanov.s.a@gmail.com> <CAByNJ6qDgqwxqGe0+uKSGCFKLULqEQ+NeBr-dAP=2Maov9ynqA@mail.gmail.com>
In-Reply-To: <CAByNJ6qDgqwxqGe0+uKSGCFKLULqEQ+NeBr-dAP=2Maov9ynqA@mail.gmail.com>
From:   Sergey Ryazanov <ryazanov.s.a@gmail.com>
Date:   Tue, 17 May 2022 11:37:36 +0300
Message-ID: <CAHNKnsRx0VWDVsP_KOKaPrU=eODOUCmpyBbYsN1rYEBXvRdaGA@mail.gmail.com>
Subject: Re: [PATCH 0/4] ath10k: add encapsulation offloading support
To:     Edward Matijevic <motolav@gmail.com>
Cc:     Kalle Valo <kvalo@kernel.org>, ath10k@lists.infradead.org,
        linux-wireless@vger.kernel.org
Content-Type: text/plain; charset="UTF-8"
Precedence: bulk

Hello Edward,

On Tue, May 17, 2022 at 5:37 AM Edward Matijevic <motolav@gmail.com> wrote:
> Hello,
> I confirm now my QCA9377 pci module has no regressions in either modes
> with these patches
> I was able to test it as an AP and it worked under ETHERNET mode
> without any obvious regressions but I'm unable to check maximum
> throughput
>
> My hardware info from dmesg and tested on kernel 5.17.7
> qca9377 hw1.0 target 0x05020000 chip_id 0x003820ff sub 11ad:0806
> firmware ver WLAN.TF.2.1-00021-QCARMSWP-1 api 6 features
> wowlan,ignore-otp crc32 42e41877
>
> My quoted statement of a possible regression seems to have been my old
> CPU acting up and is ok to remove

Thank you for the update.

-- 
Sergey