Received-SPF: pass (google.com: domain of linux-wireless-owner@vger.kernel.org designates 2620:137:e000::1:20 as permitted sender) client-ip=2620:137:e000::1:20;
Date:   Sat, 17 Sep 2022 15:10:52 +0200
From:   Stanislaw Gruszka <stf_xl@wp.pl>
To:     Daniel Golle <daniel@makrotopia.org>
Cc:     linux-wireless@vger.kernel.org,
        Helmut Schaa <helmut.schaa@googlemail.com>,
        Kalle Valo <kvalo@kernel.org>,
        "David S. Miller" <davem@davemloft.net>,
        Eric Dumazet <edumazet@google.com>,
        Jakub Kicinski <kuba@kernel.org>,
        Paolo Abeni <pabeni@redhat.com>,
        Johannes Berg <johannes.berg@intel.com>
Subject: Re: [PATCH RESEND 01/15] rt2x00: define RF5592 in init_eeprom routine
Message-ID: <20220917131052.GL17901@wp.pl>
References: <YyUA9QVEM+D2VOL4@makrotopia.org>
MIME-Version: 1.0
Content-Type: text/plain; charset=utf-8
Content-Disposition: inline
Content-Transfer-Encoding: 8bit
In-Reply-To: <YyUA9QVEM+D2VOL4@makrotopia.org>
Precedence: bulk

On Sat, Sep 17, 2022 at 12:04:21AM +0100, Daniel Golle wrote:
> From: Tomislav Požega <pozega.tomislav@gmail.com>
> 
> This patch fixes following crash on Linksys EA2750 during 5GHz wifi
> init:
> 
> [    7.955153] rt2800pci 0000:01:00.0: card - bus=0x1, slot = 0x0 irq=4
> [    7.962259] rt2800pci 0000:01:00.0: loaded eeprom from mtd device "Factory"
> [    7.969435] ieee80211 phy0: rt2x00_set_rt: Info - RT chipset 5592, rev 0222 detected
> [    7.977348] ieee80211 phy0: rt2800_init_eeprom: Error - Invalid RF chipset 0x0000 detected
> [    7.985793] ieee80211 phy0: rt2x00lib_probe_dev: Error - Failed to allocate device
> [    7.993569] CPU 0 Unable to handle kernel paging request at virtual address 00000024, epc == 800c8f54, ra == 80249ff8
> [    8.004408] Oops[#1]:
> 
> Signed-off-by: Tomislav Požega <pozega.tomislav@gmail.com>

Please add your's signed-off-by and fix the changelog. Patch
fixes  incorrect rf value encoded in eeprom, not a crash. IIRC
crash itself was caused by incorrect rt2x00->eeprom_file pointer,
happend when rt2800_init_eeprom() returned error. And should
be alredy fixed in openwrt tree.