Received-SPF: pass (google.com: domain of linux-wireless-owner@vger.kernel.org designates 2620:137:e000::1:20 as permitted sender) client-ip=2620:137:e000::1:20;
Date:   Thu, 24 Nov 2022 09:21:58 +0100
From:   Sascha Hauer <s.hauer@pengutronix.de>
To:     Ping-Ke Shih <pkshih@realtek.com>
Cc:     Bernie Huang <phhuang@realtek.com>,
        "linux-wireless@vger.kernel.org" <linux-wireless@vger.kernel.org>,
        Hans Ulli Kroll <linux@ulli-kroll.de>,
        Martin Blumenstingl <martin.blumenstingl@googlemail.com>,
        "netdev@vger.kernel.org" <netdev@vger.kernel.org>,
        Kalle Valo <kvalo@kernel.org>,
        Yan-Hsuan Chuang <tony0620emma@gmail.com>,
        "linux-kernel@vger.kernel.org" <linux-kernel@vger.kernel.org>,
        Viktor Petrenko <g0000ga@gmail.com>,
        Neo Jou <neojou@gmail.com>,
        "kernel@pengutronix.de" <kernel@pengutronix.de>,
        Johannes Berg <johannes@sipsolutions.net>,
        Alexander Hochbaum <alex@appudo.com>,
        Da Xue <da@libre.computer>
Subject: Re: [PATCH v3 00/11] RTW88: Add support for USB variants
Message-ID: <20221124082158.GE29978@pengutronix.de>
References: <20221122145226.4065843-1-s.hauer@pengutronix.de>
 <20221122145527.GA29978@pengutronix.de>
 <015051d9a5b94bbca5135c58d2cfebf3@realtek.com>
MIME-Version: 1.0
Content-Type: text/plain; charset=us-ascii
Content-Disposition: inline
In-Reply-To: <015051d9a5b94bbca5135c58d2cfebf3@realtek.com>
User-Agent: Mutt/1.10.1 (2018-07-13)
Precedence: bulk

On Thu, Nov 24, 2022 at 06:48:23AM +0000, Ping-Ke Shih wrote:
> 
> > -----Original Message-----
> > From: Sascha Hauer <s.hauer@pengutronix.de>
> > Sent: Tuesday, November 22, 2022 10:55 PM
> > To: Bernie Huang <phhuang@realtek.com>
> > Cc: linux-wireless@vger.kernel.org; Ping-Ke Shih <pkshih@realtek.com>; Hans Ulli Kroll
> > <linux@ulli-kroll.de>; Martin Blumenstingl <martin.blumenstingl@googlemail.com>; netdev@vger.kernel.org;
> > Kalle Valo <kvalo@kernel.org>; Yan-Hsuan Chuang <tony0620emma@gmail.com>; linux-kernel@vger.kernel.org;
> > Viktor Petrenko <g0000ga@gmail.com>; Neo Jou <neojou@gmail.com>; Bernie Huang <phhuang@realtek.com>;
> > kernel@pengutronix.de; Johannes Berg <johannes@sipsolutions.net>; Alexander Hochbaum <alex@appudo.com>;
> > Da Xue <da@libre.computer>
> > Subject: Re: [PATCH v3 00/11] RTW88: Add support for USB variants
> > 
> > On Tue, Nov 22, 2022 at 03:52:15PM +0100, Sascha Hauer wrote:
> > > This is the third round of adding support for the USB variants to the
> > > RTW88 driver. There are a few changes to the last version which make it
> > > worth looking at this version.
> > >
> > > First of all RTL8723du and RTL8821cu are tested working now. The issue
> > > here was that the txdesc checksum calculation was wrong. I found the
> > > correct calculation in various downstream drivers found on github.
> > >
> > > The second big issue was that TX packet aggregation was wrong. When
> > > aggregating packets each packet start has to be aligned to eight bytes.
> > > The necessary alignment was added to the total URB length before
> > > checking if there is another packet to aggregate, so the URB length
> > > included that padding after the last packet, which is wrong.  Fixing
> > > this makes the driver work much more reliably.
> > >
> > > I added all people to Cc: who showed interest in this driver and I want
> > > to welcome you for testing and reviewing.
> > 
> > There still is a problem with the RTL8822cu chipset I have here.  When
> > using NetworkManager I immediately lose the connection to the AP after
> > it has been connected:
> > 
> > [  376.213846] wlan0: authenticate with 76:83:c2:ce:81:b1
> > [  380.085463] wlan0: send auth to 76:83:c2:ce:81:b1 (try 1/3)
> > [  380.091446] wlan0: authenticated
> > [  380.108864] wlan0: associate with 76:83:c2:ce:81:b1 (try 1/3)
> > [  380.136448] wlan0: RX AssocResp from 76:83:c2:ce:81:b1 (capab=0x1411 status=0 aid=2)
> > [  380.202955] wlan0: associated
> > [  380.268140] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
> > [  380.275328] wlan0: Connection to AP 76:83:c2:ce:81:b1 lost
> > 
> > That doesn't happen when using plain wpa_supplicant. This seems to go
> > down to cd96e22bc1da ("rtw88: add beacon filter support"). After being
> > connected I get a BCN_FILTER_CONNECTION_LOSS beacon. Plain
> > wpa_supplicant seems to go another code patch and doesn't activate
> > connection quality monitoring.
> > 
> > The connection to the AP works fluently also with NetworkManager though
> > when I just ignore the BCN_FILTER_CONNECTION_LOSS beacon.
> > 
> > Any idea what may be wrong here?
> > 
> 
> Please reference to below patch to see if it can work to you.
> 
> https://lore.kernel.org/linux-wireless/20221124064442.28042-1-pkshih@realtek.com/T/#u

Great! That solves this issue \o/

Sascha

-- 
Pengutronix e.K.                           |                             |
Steuerwalder Str. 21                       | http://www.pengutronix.de/  |
31137 Hildesheim, Germany                  | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |