Received-SPF: pass (google.com: domain of linux-wireless-owner@vger.kernel.org designates 2620:137:e000::1:20 as permitted sender) client-ip=2620:137:e000::1:20;
Message-ID: <f1775b71-97fc-8b23-6ae1-319aa26c414a@gmail.com>
Date:   Thu, 24 Nov 2022 23:53:41 +0200
MIME-Version: 1.0
User-Agent: Mozilla/5.0 (X11; Linux x86_64; rv:102.0) Gecko/20100101
 Thunderbird/102.3.3
Subject: Re: TL-WN823N Realtek WPA3 SSID connection problem #9
To:     Ioannis Barkas <jnyb.de@gmail.com>, linux-wireless@vger.kernel.org
References: <CADUzMVYz8zJ13cunSKbtKrArsiSCr2m5k7QuwsP0nvyuVLrK6Q@mail.gmail.com>
Content-Language: en-US
From:   Bitterblue Smith <rtl8821cerfe2@gmail.com>
In-Reply-To: <CADUzMVYz8zJ13cunSKbtKrArsiSCr2m5k7QuwsP0nvyuVLrK6Q@mail.gmail.com>
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 7bit
Precedence: bulk

On 25/11/2022 21:40, Ioannis Barkas wrote:
> Hello,
> 
> I have tested various USB devices and all worked except the TL-WN823N.
> This device has never worked and we have 2 of them.
> 
> On Ubuntu boot I get:
> [ 1208.638541] usb 1-1: RTL8192EU rev B (SMIC) 2T2R, TX queues 3,
> WiFi=1, BT=0, GPS=0, HI PA=0
> [ 1208.638553] usb 1-1: RTL8192EU MAC: d4:6e:0e:**:**:**
> [ 1208.638560] usb 1-1: rtl8xxxu: Loading firmware rtlwifi/rtl8192eu_nic.bin
> [ 1208.641483] usb 1-1: Firmware revision 19.0 (signature 0x92e1)
> [ 1209.735452] usbcore: registered new interface driver rtl8xxxu
> 
> When I attempt to connect at a 2,4GHz WPA3 SSID this is what I get:
> [ 1502.319954] wlxd46e0eeba0f4: authenticate with c6:27:28:**:**:**
> [ 1502.332105] wlxd46e0eeba0f4: send auth to c6:27:28:**:**:** (try 1/3)
> [ 1502.476159] wlxd46e0eeba0f4: authenticate with c6:27:28:**:**:**
> [ 1502.476181] wlxd46e0eeba0f4: send auth to c6:27:28:**:**:** (try 1/3)
> [ 1502.587356] wlxd46e0eeba0f4: authenticated
> [ 1502.589113] wlxd46e0eeba0f4: associate with c6:27:28:**:**:** (try 1/3)
> [ 1502.593773] wlxd46e0eeba0f4: RX AssocResp from c6:27:28:**:**:**
> (capab=0x1431 status=0 aid=16)
> [ 1502.595559] usb 1-1: rtl8xxxu_bss_info_changed: HT supported
> [ 1502.597222] wlxd46e0eeba0f4: associated
> [ 1502.743847] wlxd46e0eeba0f4: deauthenticating from
> c6:27:28:**:**:** by local choice (Reason: 1=UNSPECIFIED)
> 
> To make things worse, I accidentally inserted it in a USB 1.1 port on
> my AMD test PC and it could not even connect to a combo 2,4GHz WPA2,3
> SSID:
> [ 1001.681485] wlxd46e0eeba0f4: authenticate with c6:27:28:**:**:**
> [ 1001.703190] wlxd46e0eeba0f4: send auth to c6:27:28:**:**:** (try 1/3)
> [ 1001.904265] wlxd46e0eeba0f4: send auth to c6:27:28:**:**:** (try 2/3)
> [ 1002.108231] wlxd46e0eeba0f4: send auth to c6:27:28:**:**:** (try 3/3)
> [ 1002.312262] wlxd46e0eeba0f4: authentication with c6:27:28:**:**:** timed out
> [ 1013.501401] wlxd46e0eeba0f4: authenticate with c6:27:28:**:**:**
> [ 1013.523483] wlxd46e0eeba0f4: send auth to c6:27:28:**:**:** (try 1/3)
> [ 1013.724276] wlxd46e0eeba0f4: send auth to c6:27:28:**:**:** (try 2/3)
> [ 1013.928271] wlxd46e0eeba0f4: send auth to c6:27:28:**:**:** (try 3/3)
> [ 1014.132282] wlxd46e0eeba0f4: authentication with c6:27:28:**:**:** timed out
> [ 1027.230375] wlxd46e0eeba0f4: authenticate with c6:27:28:**:**:**
> [ 1027.242103] wlxd46e0eeba0f4: send auth to c6:27:28:**:**:** (try 1/3)
> [ 1027.444258] wlxd46e0eeba0f4: send auth to c6:27:28:**:**:** (try 2/3)
> [ 1027.648271] wlxd46e0eeba0f4: send auth to c6:27:28:**:**:** (try 3/3)
> [ 1027.852237] wlxd46e0eeba0f4: authentication with c6:27:28:**:**:** timed out
> 
> On USB 2.0 port the problem with WPA2,3 SSID was resolved. Is it
> possible to set a flag so that the driver will bail out if the device
> is on a USB 1.1 port? The truth is that the maximum speed it reached
> was way below the 12Mb of USB 1.1 so it should not have a problem but
> in practise it does...

I believe the authentication failure is not related to USB 1.1. I get
that even with USB 2.0. It's probably intermittent, the best kind of
failure. Because of this and other problems, the standard advice on
various internet forums is "blacklist rtl8xxxu, install
Mange/rtl8192eu-linux-driver". I will look into it someday soon (ish).

> 
>  This is the device:
> Device Descriptor:
>   bLength                18
>   bDescriptorType         1
>   bcdUSB               2.10
>   bDeviceClass            0
>   bDeviceSubClass         0
>   bDeviceProtocol         0
>   bMaxPacketSize0        64
>   idVendor           0x2357 TP-Link
>   idProduct          0x0109 TL-WN823N v2/v3 [Realtek RTL8192EU]
>   bcdDevice            2.00
>   iManufacturer           1 Realtek
>   iProduct                2 802.11n NIC
>   iSerial                 3 00**********
>   bNumConfigurations      1
>   Configuration Descriptor:
>     bLength                 9
>     bDescriptorType         2
>     wTotalLength       0x0035
>     bNumInterfaces          1
>     bConfigurationValue     1
>     iConfiguration          0
>     bmAttributes         0xe0
>       Self Powered
>       Remote Wakeup
>     MaxPower              500mA
>     Interface Descriptor:
>       bLength                 9
>       bDescriptorType         4
>       bInterfaceNumber        0
>       bAlternateSetting       0
>       bNumEndpoints           5
>       bInterfaceClass       255 Vendor Specific Class
>       bInterfaceSubClass    255 Vendor Specific Subclass
>       bInterfaceProtocol    255 Vendor Specific Protocol
>       iInterface              2 802.11n NIC
>       Endpoint Descriptor:
>         bLength                 7
>         bDescriptorType         5
>         bEndpointAddress     0x84  EP 4 IN
>         bmAttributes            2
>           Transfer Type            Bulk
>           Synch Type               None
>           Usage Type               Data
>         wMaxPacketSize     0x0200  1x 512 bytes
>         bInterval               0
>       Endpoint Descriptor:
>         bLength                 7
>         bDescriptorType         5
>         bEndpointAddress     0x05  EP 5 OUT
>         bmAttributes            2
>           Transfer Type            Bulk
>           Synch Type               None
>           Usage Type               Data
>         wMaxPacketSize     0x0200  1x 512 bytes
>         bInterval               0
>       Endpoint Descriptor:
>         bLength                 7
>         bDescriptorType         5
>         bEndpointAddress     0x06  EP 6 OUT
>         bmAttributes            2
>           Transfer Type            Bulk
>           Synch Type               None
>           Usage Type               Data
>         wMaxPacketSize     0x0200  1x 512 bytes
>         bInterval               0
>       Endpoint Descriptor:
>         bLength                 7
>         bDescriptorType         5
>         bEndpointAddress     0x87  EP 7 IN
>         bmAttributes            3
>           Transfer Type            Interrupt
>           Synch Type               None
>           Usage Type               Data
>         wMaxPacketSize     0x0040  1x 64 bytes
>         bInterval               3
>       Endpoint Descriptor:
>         bLength                 7
>         bDescriptorType         5
>         bEndpointAddress     0x08  EP 8 OUT
>         bmAttributes            2
>           Transfer Type            Bulk
>           Synch Type               None
>           Usage Type               Data
>         wMaxPacketSize     0x0200  1x 512 bytes
>         bInterval               0
> Binary Object Store Descriptor:
>   bLength                 5
>   bDescriptorType        15
>   wTotalLength       0x000c
>   bNumDeviceCaps          1
>   USB 2.0 Extension Device Capability:
>     bLength                 7
>     bDescriptorType        16
>     bDevCapabilityType      2
>     bmAttributes   0x00000002
>       HIRD Link Power Management (LPM) Supported
> Device Status:     0x0001
>   Self Powered