From:   Felix Fietkau <nbd@nbd.name>
To:     linux-wireless@vger.kernel.org
Cc:     kvalo@codeaurora.org
Subject: [PATCH 6.3] wifi: mt76: mt7915: add back 160MHz channel width support for MT7915
Date:   Wed,  1 Mar 2023 17:37:39 +0100
Message-Id: <20230301163739.52314-1-nbd@nbd.name>
MIME-Version: 1.0
Content-Transfer-Encoding: 8bit
Precedence: bulk

A number of users reported that this support was working fine before
it got removed. Add it back, but leave out the unsupported 80+80 mode.

Fixes: ac922bd60ace ("wifi: mt76: mt7915: remove BW160 and BW80+80 support")
Signed-off-by: Felix Fietkau <nbd@nbd.name>
---
 .../net/wireless/mediatek/mt76/mt7915/init.c  | 40 ++++++++++++++-----
 1 file changed, 30 insertions(+), 10 deletions(-)

diff --git a/drivers/net/wireless/mediatek/mt76/mt7915/init.c b/drivers/net/wireless/mediatek/mt76/mt7915/init.c
index a7ff78b8697c..71ccefd39cb2 100644
--- a/drivers/net/wireless/mediatek/mt76/mt7915/init.c
+++ b/drivers/net/wireless/mediatek/mt76/mt7915/init.c
@@ -384,7 +384,6 @@ mt7915_init_wiphy(struct mt7915_phy *phy)
 	ieee80211_hw_set(hw, SUPPORTS_RX_DECAP_OFFLOAD);
 	ieee80211_hw_set(hw, SUPPORTS_MULTI_BSSID);
 	ieee80211_hw_set(hw, WANT_MONITOR_VIF);
-	ieee80211_hw_set(hw, SUPPORTS_VHT_EXT_NSS_BW);
 
 	hw->max_tx_fragments = 4;
 
@@ -397,6 +396,9 @@ mt7915_init_wiphy(struct mt7915_phy *phy)
 	}
 
 	if (phy->mt76->cap.has_5ghz) {
+		struct ieee80211_sta_vht_cap *vht_cap;
+
+		vht_cap = &phy->mt76->sband_5g.sband.vht_cap;
 		phy->mt76->sband_5g.sband.ht_cap.cap |=
 			IEEE80211_HT_CAP_LDPC_CODING |
 			IEEE80211_HT_CAP_MAX_AMSDU;
@@ -404,19 +406,28 @@ mt7915_init_wiphy(struct mt7915_phy *phy)
 			IEEE80211_HT_MPDU_DENSITY_4;
 
 		if (is_mt7915(&dev->mt76)) {
-			phy->mt76->sband_5g.sband.vht_cap.cap |=
+			vht_cap->cap |=
 				IEEE80211_VHT_CAP_MAX_MPDU_LENGTH_7991 |
 				IEEE80211_VHT_CAP_MAX_A_MPDU_LENGTH_EXPONENT_MASK;
+
+			if (!dev->dbdc_support)
+				vht_cap->cap |=
+					IEEE80211_VHT_CAP_SHORT_GI_160 |
+					IEEE80211_VHT_CAP_SUPP_CHAN_WIDTH_160MHZ |
+					FIELD_PREP(IEEE80211_VHT_CAP_EXT_NSS_BW_MASK, 1);
 		} else {
-			phy->mt76->sband_5g.sband.vht_cap.cap |=
+			vht_cap->cap |=
 				IEEE80211_VHT_CAP_MAX_MPDU_LENGTH_11454 |
 				IEEE80211_VHT_CAP_MAX_A_MPDU_LENGTH_EXPONENT_MASK;
 
 			/* mt7916 dbdc with 2g 2x2 bw40 and 5g 2x2 bw160c */
-			phy->mt76->sband_5g.sband.vht_cap.cap |=
+			vht_cap->cap |=
 				IEEE80211_VHT_CAP_SHORT_GI_160 |
 				IEEE80211_VHT_CAP_SUPP_CHAN_WIDTH_160MHZ;
 		}
+
+		if (!is_mt7915(&dev->mt76) || !dev->dbdc_support)
+			ieee80211_hw_set(hw, SUPPORTS_VHT_EXT_NSS_BW);
 	}
 
 	mt76_set_stream_caps(phy->mt76, true);
@@ -842,9 +853,13 @@ mt7915_set_stream_he_txbf_caps(struct mt7915_phy *phy,
 	int sts = hweight8(phy->mt76->chainmask);
 	u8 c, sts_160 = sts;
 
-	/* mt7915 doesn't support bw160 */
-	if (is_mt7915(&dev->mt76))
-		sts_160 = 0;
+	/* Can do 1/2 of STS in 160Mhz mode for mt7915 */
+	if (is_mt7915(&dev->mt76)) {
+		if (!dev->dbdc_support)
+			sts_160 /= 2;
+		else
+			sts_160 = 0;
+	}
 
 #ifdef CONFIG_MAC80211_MESH
 	if (vif == NL80211_IFTYPE_MESH_POINT)
@@ -945,10 +960,15 @@ mt7915_init_he_caps(struct mt7915_phy *phy, enum nl80211_band band,
 	int i, idx = 0, nss = hweight8(phy->mt76->antenna_mask);
 	u16 mcs_map = 0;
 	u16 mcs_map_160 = 0;
-	u8 nss_160 = nss;
+	u8 nss_160;
 
-	/* Can't do 160MHz with mt7915 */
-	if (is_mt7915(&dev->mt76))
+	if (!is_mt7915(&dev->mt76))
+		nss_160 = nss;
+	else if (!dev->dbdc_support)
+		/* Can do 1/2 of NSS streams in 160Mhz mode for mt7915 */
+		nss_160 = nss / 2;
+	else
+		/* Can't do 160MHz with mt7915 dbdc */
 		nss_160 = 0;
 
 	for (i = 0; i < 8; i++) {
-- 
2.39.0