Received-SPF: pass (google.com: domain of linux-wireless-owner@vger.kernel.org designates 2620:137:e000::1:20 as permitted sender) client-ip=2620:137:e000::1:20;
Message-ID: <3a2c1732-e690-231e-d3aa-decbb72588de@quicinc.com>
Date:   Wed, 10 May 2023 15:35:57 +0530
MIME-Version: 1.0
User-Agent: Mozilla/5.0 (Windows NT 10.0; Win64; x64; rv:102.0) Gecko/20100101
 Thunderbird/102.10.1
Subject: Re: [PATCH 0/2] ath11k: Send HT fixed rate in WMI peer fixed param
Content-Language: en-US
To:     <ath11k@lists.infradead.org>
CC:     <linux-wireless@vger.kernel.org>
References: <20230504092349.3542530-1-quic_mkenna@quicinc.com>
From:   Maharaja Kennadyrajan <quic_mkenna@quicinc.com>
In-Reply-To: <20230504092349.3542530-1-quic_mkenna@quicinc.com>
Content-Type: text/plain; charset="UTF-8"; format=flowed
Content-Transfer-Encoding: 7bit
Precedence: bulk

Hi,

Ignore this patchset, I have sent the v2 version of this patchset by 
rebasing it on latest TOT.

> Due to the firmware behavior with HT fixed rate setting,
> HT fixed rate MCS with NSS > 1 are treated as NSS = 1
> HT rates in the firmware and enables the HT fixed rate of
> NSS = 1.
>
> This leads to HT fixed rate is always configured for NSS = 1
> even though the user sets NSS = 2 or > 1 HT fixed MCS in the
> set bitrate command.
>
> Currently HT fixed MCS is sent via WMI peer assoc command.
> Fix this issue, by sending the HT fixed rate MCS in WMI peer
> fixed param instead of sending in peer assoc command.
>
> Maharaja Kennadyrajan (2):
>    ath11k: Relocate the func ath11k_mac_bitrate_mask_num_ht_rates() and
>      change hweight16 to hweight8
>    ath11k: Send HT fixed rate in WMI peer fixed param
>
>   drivers/net/wireless/ath/ath11k/mac.c | 93 ++++++++++++++++++++++-----
>   1 file changed, 76 insertions(+), 17 deletions(-)
>