Received-SPF: pass (google.com: domain of linux-wireless-owner@vger.kernel.org designates 2620:137:e000::1:20 as permitted sender) client-ip=2620:137:e000::1:20;
Content-Type: text/plain; charset="utf-8"
MIME-Version: 1.0
Content-Transfer-Encoding: 7bit
Subject: Re: [PATCH v2] wifi: ath12k: trigger station disconnect on hardware
 restart
From:   Kalle Valo <kvalo@kernel.org>
In-Reply-To: <20230714092555.2018-1-quic_wgong@quicinc.com>
References: <20230714092555.2018-1-quic_wgong@quicinc.com>
To:     Wen Gong <quic_wgong@quicinc.com>
Cc:     <ath12k@lists.infradead.org>, <linux-wireless@vger.kernel.org>,
        <quic_wgong@quicinc.com>
User-Agent: pwcli/0.1.1-git (https://github.com/kvalo/pwcli/) Python/3.11.2
Message-ID: <169099563293.463701.1018312535527006346.kvalo@kernel.org>
Date:   Wed,  2 Aug 2023 17:00:34 +0000 (UTC)
Precedence: bulk

Wen Gong <quic_wgong@quicinc.com> wrote:

> Currently after the hardware restart triggered from the driver, the
> station interface connection remains intact, since a disconnect
> trigger is not sent to userspace. This can lead to a problem in
> targets where the wifi mac sequence is added by the firmware.
> 
> After the target restart, its wifi mac sequence number gets reset to
> zero. Hence AP to which our device is connected will receive frames
> with a wifi mac sequence number jump to the past, thereby resulting
> in the AP dropping all these frames, until the frame arrives with a
> wifi mac sequence number which AP was expecting.
> 
> To avoid such frame drops, its better to trigger a station disconnect
> upon target hardware restart which can be done with API
> ieee80211_reconfig_disconnect exposed to mac80211.
> 
> Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0-03427-QCAHMTSWPL_V1.0_V2.0_SILICONZ-1.15378.4
> 
> Signed-off-by: Wen Gong <quic_wgong@quicinc.com>
> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>

Patch applied to ath-next branch of ath.git, thanks.

68c35cc39b41 wifi: ath12k: trigger station disconnect on hardware restart

-- 
https://patchwork.kernel.org/project/linux-wireless/patch/20230714092555.2018-1-quic_wgong@quicinc.com/

https://wireless.wiki.kernel.org/en/developers/documentation/submittingpatches