Received-SPF: pass (google.com: domain of linux-wireless-owner@vger.kernel.org designates 2620:137:e000::3:2 as permitted sender) client-ip=2620:137:e000::3:2;
From:   Ping-Ke Shih <pkshih@realtek.com>
To:     <kvalo@kernel.org>, <johannes@sipsolutions.net>
CC:     <linux-wireless@vger.kernel.org>
Subject: [PATCH v2 0/6] wifi: rtw89: handle EHT rate
Date:   Tue, 10 Oct 2023 10:10:00 +0800
Message-ID: <20231010021006.6061-1-pkshih@realtek.com>
MIME-Version: 1.0
Content-Transfer-Encoding: 7BIT
Content-Type:   text/plain; charset=US-ASCII
Precedence: bulk

We have parsed new formats used by WiFi 7 chips before, and this patchset
is to handle EHT rate. The handlers contain
 - RX rate
   * from RX descriptor, which is also used to find corresponding PPDU
     status packet
 - TX rate
   * RA (Rate adaptive) mask to tell firmware selectable rates
   * RA report tells driver the rate selected by firmware
 - debugfs
   * show TX/RX rate above
 - monitor mode
   * add enumerators of radiotap bandwidth of EHT U-SIG
   * add EHT radiotap if working on monitor mode

v2:
  - correct commit message of patch 5/6 about the source of bandwidth
    definition of EHT U-SIG suggested by Johannes

Ping-Ke Shih (6):
  wifi: rtw89: parse EHT information from RX descriptor and PPDU status
    packet
  wifi: rtw89: Add EHT rate mask as parameters of RA H2C command
  wifi: rtw89: parse TX EHT rate selected by firmware from RA C2H report
  wifi: rtw89: show EHT rate in debugfs
  wifi: radiotap: add bandwidth definition of EHT U-SIG
  wifi: rtw89: add EHT radiotap in monitor mode

 drivers/net/wireless/realtek/rtw89/core.c  | 125 ++++++++++++++++++---
 drivers/net/wireless/realtek/rtw89/core.h  |  11 +-
 drivers/net/wireless/realtek/rtw89/debug.c |  14 +++
 drivers/net/wireless/realtek/rtw89/phy.c   |  70 +++++++++++-
 drivers/net/wireless/realtek/rtw89/phy.h   |   5 +
 include/net/ieee80211_radiotap.h           |   6 +
 6 files changed, 214 insertions(+), 17 deletions(-)

-- 
2.25.1