Received-SPF: pass (google.com: domain of linux-wireless-owner@vger.kernel.org designates 23.128.96.32 as permitted sender) client-ip=23.128.96.32;
From:   Kang Yang <quic_kangyang@quicinc.com>
To:     <ath12k@lists.infradead.org>
CC:     <linux-wireless@vger.kernel.org>, <quic_kangyang@quicinc.com>
Subject: [PATCH v2] wifi: ath12k: fix and enable AP mode for WCN7850
Date:   Tue, 21 Nov 2023 10:24:59 +0800
Message-ID: <20231121022459.17209-1-quic_kangyang@quicinc.com>
MIME-Version: 1.0
Content-Transfer-Encoding: 8bit
Content-Type: text/plain
Precedence: bulk

For AP mode, the peer is created earlier in ath12k_mac_op_add_interface().
But ath12k_mac_op_assign_vif_chanctx() will try to create peer again.
Then an error will return which make startup of AP mode fail.

Kernel log:
[ 5017.665006] ath12k_pci 0000:04:00.0: failed to create peer after vdev start delay: -22

wpa_supplicant log:
Failed to set beacon parameters
Interface initialization failed
wls1: interface state UNINITIALIZED->DISABLED
wls1: AP-DISABLED
wls1: Unable to setup interface.
Failed to initialize AP interface
wls1: interface state DISABLED->DISABLED
wls1: AP-DISABLED

So change this check and enable AP mode for WCN7850, then soft AP can
work normally.

Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0-03427-QCAHMTSWPL_V1.0_V2.0_SILICONZ-1.15378.4

Signed-off-by: Kang Yang <quic_kangyang@quicinc.com>
---

v2: fix Subject content.

--
 drivers/net/wireless/ath/ath12k/hw.c  | 3 ++-
 drivers/net/wireless/ath/ath12k/mac.c | 4 ++--
 2 files changed, 4 insertions(+), 3 deletions(-)

diff --git a/drivers/net/wireless/ath/ath12k/hw.c b/drivers/net/wireless/ath/ath12k/hw.c
index 2245fb510ba2..b55cf33e37bd 100644
--- a/drivers/net/wireless/ath/ath12k/hw.c
+++ b/drivers/net/wireless/ath/ath12k/hw.c
@@ -949,7 +949,8 @@ static const struct ath12k_hw_params ath12k_hw_params[] = {
 		.rx_mac_buf_ring = true,
 		.vdev_start_delay = true,
 
-		.interface_modes = BIT(NL80211_IFTYPE_STATION),
+		.interface_modes = BIT(NL80211_IFTYPE_STATION) |
+				   BIT(NL80211_IFTYPE_AP),
 		.supports_monitor = false,
 
 		.idle_ps = true,
diff --git a/drivers/net/wireless/ath/ath12k/mac.c b/drivers/net/wireless/ath/ath12k/mac.c
index fc0d14ea328e..b698e55a5b7b 100644
--- a/drivers/net/wireless/ath/ath12k/mac.c
+++ b/drivers/net/wireless/ath/ath12k/mac.c
@@ -6380,8 +6380,8 @@ ath12k_mac_op_assign_vif_chanctx(struct ieee80211_hw *hw,
 	}
 
 	if (ab->hw_params->vdev_start_delay &&
-	    (arvif->vdev_type == WMI_VDEV_TYPE_AP ||
-	    arvif->vdev_type == WMI_VDEV_TYPE_MONITOR)) {
+	    arvif->vdev_type != WMI_VDEV_TYPE_AP &&
+	    arvif->vdev_type != WMI_VDEV_TYPE_MONITOR) {
 		param.vdev_id = arvif->vdev_id;
 		param.peer_type = WMI_PEER_TYPE_DEFAULT;
 		param.peer_addr = ar->mac_addr;

base-commit: 9a36440d929d134c56030a8492405708a143f580
-- 
2.34.1