Received-SPF: pass (google.com: domain of linux-wireless+bounces-37-linux.lists.archive=gmail.com@vger.kernel.org designates 2604:1380:45e3:2400::1 as permitted sender) client-ip=2604:1380:45e3:2400::1;
From: =?UTF-8?q?Ilpo=20J=C3=A4rvinen?= <ilpo.jarvinen@linux.intel.com>
To: "John W. Linville" <linville@tuxdriver.com>,
	Kalle Valo <kvalo@kernel.org>,
	Larry Finger <Larry.Finger@lwfinger.net>,
	linux-wireless@vger.kernel.org,
	Ping-Ke Shih <pkshih@realtek.com>,
	Bjorn Helgaas <bhelgaas@google.com>,
	linux-kernel@vger.kernel.org
Cc: =?UTF-8?q?Ilpo=20J=C3=A4rvinen?= <ilpo.jarvinen@linux.intel.com>
Subject: [PATCH v2 03/10] wifi: rtlwifi: Convert to use PCIe capability accessors
Date: Fri, 24 Nov 2023 10:47:18 +0200
Message-Id: <20231124084725.12738-4-ilpo.jarvinen@linux.intel.com>
In-Reply-To: <20231124084725.12738-1-ilpo.jarvinen@linux.intel.com>
References: <20231124084725.12738-1-ilpo.jarvinen@linux.intel.com>
Precedence: bulk
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

The rtlwifi driver accesses PCIe capabilities through custom config
offsets. Convert the accesses to use the normal PCIe capability
accessors.

Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
---
 drivers/net/wireless/realtek/rtlwifi/pci.c | 18 +++++++++---------
 1 file changed, 9 insertions(+), 9 deletions(-)

diff --git a/drivers/net/wireless/realtek/rtlwifi/pci.c b/drivers/net/wireless/realtek/rtlwifi/pci.c
index b118df035243..a29d7df6fff5 100644
--- a/drivers/net/wireless/realtek/rtlwifi/pci.c
+++ b/drivers/net/wireless/realtek/rtlwifi/pci.c
@@ -64,7 +64,7 @@ static void _rtl_pci_update_default_setting(struct ieee80211_hw *hw)
 	struct rtl_ps_ctl *ppsc = rtl_psc(rtl_priv(hw));
 	struct rtl_pci *rtlpci = rtl_pcidev(rtl_pcipriv(hw));
 	u8 pcibridge_vendor = pcipriv->ndis_adapter.pcibridge_vendor;
-	u8 init_aspm;
+	u16 init_aspm;
 
 	ppsc->reg_rfps_level = 0;
 	ppsc->support_aspm = false;
@@ -151,9 +151,10 @@ static void _rtl_pci_update_default_setting(struct ieee80211_hw *hw)
 	/* toshiba aspm issue, toshiba will set aspm selfly
 	 * so we should not set aspm in driver
 	 */
-	pci_read_config_byte(rtlpci->pdev, 0x80, &init_aspm);
+	pcie_capability_read_word(rtlpci->pdev, PCI_EXP_LNKCTL, &init_aspm);
 	if (rtlpriv->rtlhal.hw_type == HARDWARE_TYPE_RTL8192SE &&
-	    init_aspm == 0x43)
+	    ((u8)init_aspm) == (PCI_EXP_LNKCTL_ASPM_L0S |
+				PCI_EXP_LNKCTL_ASPM_L1 | PCI_EXP_LNKCTL_CCC))
 		ppsc->support_aspm = false;
 }
 
@@ -203,7 +204,7 @@ static void rtl_pci_disable_aspm(struct ieee80211_hw *hw)
 	/*Retrieve original configuration settings. */
 	u8 linkctrl_reg = pcipriv->ndis_adapter.linkctrl_reg;
 	u16 aspmlevel = 0;
-	u8 tmp_u1b = 0;
+	u16 tmp_u1b = 0;
 
 	if (!ppsc->support_aspm)
 		return;
@@ -221,10 +222,10 @@ static void rtl_pci_disable_aspm(struct ieee80211_hw *hw)
 	}
 
 	/*for promising device will in L0 state after an I/O. */
-	pci_read_config_byte(rtlpci->pdev, 0x80, &tmp_u1b);
+	pcie_capability_read_word(rtlpci->pdev, PCI_EXP_LNKCTL, &tmp_u1b);
 
 	/*Set corresponding value. */
-	aspmlevel |= BIT(0) | BIT(1);
+	aspmlevel |= PCI_EXP_LNKCTL_ASPM_L0S | PCI_EXP_LNKCTL_ASPM_L1;
 	linkctrl_reg &= ~aspmlevel;
 
 	_rtl_pci_platform_switch_device_pci_aspm(hw, linkctrl_reg);
@@ -351,9 +352,8 @@ static void rtl_pci_parse_configuration(struct pci_dev *pdev,
 	rtl_dbg(rtlpriv, COMP_INIT, DBG_TRACE, "Link Control Register =%x\n",
 		pcipriv->ndis_adapter.linkctrl_reg);
 
-	pci_read_config_byte(pdev, 0x98, &tmp);
-	tmp |= BIT(4);
-	pci_write_config_byte(pdev, 0x98, tmp);
+	pcie_capability_set_word(pdev, PCI_EXP_DEVCTL2,
+				 PCI_EXP_DEVCTL2_COMP_TMOUT_DIS);
 
 	tmp = 0x17;
 	pci_write_config_byte(pdev, 0x70f, tmp);
-- 
2.30.2