Received-SPF: pass (google.com: domain of linux-wireless+bounces-1507-linux.lists.archive=gmail.com@vger.kernel.org designates 147.75.199.223 as permitted sender) client-ip=147.75.199.223;
Message-ID: <efd81ac0-8b82-43e0-aef3-44313a5187ba@quicinc.com>
Date: Thu, 4 Jan 2024 08:50:00 -0800
Precedence: bulk
MIME-Version: 1.0
User-Agent: Mozilla Thunderbird
Subject: Re: [PATCH] wifi: ath12k: add display tx and rx bitrate for 11be
Content-Language: en-US
To: Lingbo Kong <quic_lingbok@quicinc.com>, <ath12k@lists.infradead.org>
CC: <linux-wireless@vger.kernel.org>
References: <20240104032202.19472-1-quic_lingbok@quicinc.com>
From: Jeff Johnson <quic_jjohnson@quicinc.com>
In-Reply-To: <20240104032202.19472-1-quic_lingbok@quicinc.com>
Content-Type: text/plain; charset="UTF-8"
Content-Transfer-Encoding: 7bit

On 1/3/2024 7:22 PM, Lingbo Kong wrote:
> When AP is in 11be state, STA's tx/rx bitrate display error value using iw
> dev wlan command.
> 
> In ath12k_dp_tx_update_txcompl() function, not handle the case when
> pkt_type is equal to HAL_TX_RATE_STATS_PKT_TYPE_11BE, so add a else if
> statement to handle this situation.
> 
> In ath12k_dp_rx_h_rate function, not handle the case when pkt_type is equal
> to RX_MSDU_START_PKT_TYPE_11BE, so add a case statement to handle this
> situation.
> 
> After that, "iw dev xxx station dump" show the correct tx bitrate such as:
> tx bitrate: 1441.1 MBit/s 80MHz EHT-MCS 13 EHT-NSS 2 EHT-GI 0
> rx bitrate: 1441.1 MBit/s 80MHz EHT-MCS 9 EHT-NSS 3 EHT-GI 0
> 
> Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0-03427-QCAHMTSWPL_V1.0_V2.0_SILICONZ-1.15378.4
> 
> Signed-off-by: Lingbo Kong <quic_lingbok@quicinc.com>
Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com>